Dissolution of U,Np, Pu,and Am Oxides and Their Mixtures in Tributyl Phosphate Saturated with HNO3

It was shown for the first time that weighable amounts of uranium dioxide and its mixtures with Np, Pu, and Am in the form of solid solutions can be efficiently and quantitatively dissolved in the presence of tributyl phosphate saturated with HNO₃. Individual PuO₂ and NpO₂ are not dissolved under these conditions. In treatment of a mechanical mixture of UO₂ with PuO₂ or NpO₂, uranium is completely dissolved, while plutonium and neptunium remain in the precipitate.     

Differentially coherent code acquisition in the MIMO-aided multi-carrier DS-CDMA downlink

Both differentially coherent and non-coherent code acquisition schemes designed for the multiple-input multiple-output (MIMO)-aided multi-carrier (MC)-DS-CDMA downlink are analysed, when communicating over uncorrelated Rayleigh channels. The attainable mean acquisition time (MAT) performance is studied as a function of both the number of multiple transmit/multiple receive antennas and that of the number of subcarriers. It is demonstrated that in contrast to the expectations, when the number of multiple transmit antennas and/or that of the subcarriers is increased in both the differentially coherent and the non-coherent code acquisition scenarios, the achievable MAT deteriorates over the entire signal-to-interference plus noise ratio (SINR) per chip (E_c/I_o) range considered, except for the scenario of single-carrier (SC)-DS-CDMA using P = 2 transmit antennas and R = 1 receive antenna. As expected, the degree of performance degradation depends upon the specific scheme and the E_c/I_o ratio considered, although paradoxically, the correctly synchronised MIMO-aided system is capable of attaining its target bit error ratio performance at reduced SINR values.     

Hybrid finite-element method for discretising cylindrically symmetric parts in electrotechnical models

In many technical devices such as transformers and electrical machines, large differences in geometric dimensions are observed. As a consequence, the generation of a 3D computational grid for the whole device leads to unacceptably large numbers of elements or can even fail. In addition to the commonly applied cartesian or cylindrical symmetries of the overall geometry, the model can be subdivided into parts featuring translational or cylindrical symmetries. Such parts are discretised separately, accounting for the local symmetry, and are then combined with the surrounding 3D model. Excitations and boundary conditions of the submodels are not necessarily symmetric but are expected to be smooth in the direction of the symmetry. Then, the field distribution at the interface is well approximated by a set of spectral elements along the dimension of symmetry. Coupling between the model parts is carried out by means of Lagrange multipliers. A single-phase transformer with thin insulation sheets is taken as an example to illustrate the proposed hybrid discretisation. The cross-section of the cylindrically symmetric part containing thin sheets, is represented by a fine 2D finite-element mesh so that all the geometrical details can be resolved, and the rest of the structure is discretised by a 3D mesh. Nevertheless, a fully 3D field distribution is calculated in all model parts. Only a small number of harmonic functions is needed to account for the azimuthal field variation at the cylindrical interface. Hence, the number of unknowns in the numerical model is reduced significantly, while a high level of accuracy is maintained     

The effect of the scale of horizontal subsurface flow constructed wetlands on flow and transport parameters.

Horizontal subsurface flow constructed wetlands have proven their efficiency in treating wastewater and removing the pollutants of concern. Treatment efficiency depends on the wastewater residence time, which is a function of the hydraulic loading and the physical conditions of the constructed filter system, which can be described with effective parameters such as: hydraulic conductivity, porosity, dispersivity etc. Because spatial variability is often scale dependent, these effective parameters may be affected by the scale of the system being studied. In this paper the results of tracer experiments in constructed filters using saturated horizontal flow at three scales (small and medium lab scales and full-scale system) using the same filter media is reported. Light-weight aggregate (filter media termed Filtralite-P) was used at all scales. Increasing the scale was associated with increasing dispersivity, meanwhile hydraulic conductivity experienced dramatic reduction and variation by increasing the examined scale. Observed changes in the hydraulic parameters indicate that heterogeneity at different scales should be taken into account when the performance of LWA filters are evaluated from small-scale experiments.     

Application of the high-gain substrate-superstrate configuration to dielectric leaky-wave antennas

The high-gain substrate-superstrate configuration, which was proposed to increase the gain in printed circuit antennas, is applied to dielectric leaky-wave antennas (LWAs) to improve its frequency response. Analysis of a slitted suspended dielectric rectangular waveguide is carried out using a full-wave method. It is proved that the minimum values of the leakage constant of the leaky-wave mode for the suspended configuration are related to the high-gain resonance conditions. Moreover, it is found that the suspended LWA exhibits very small beamwidth variations in a large frequency bandwidth. It is well-known that inhomogeneous filled LWAs suffer from variation of beamwidth as the angle of maximum radiation is scanned with frequency. The proposed topology can be adjusted so that a flat response of the beamwidth can be obtained in a large frequency band, while maintaining the frequency-scanning behavior of the LWA.     

Optimized video streaming over 802.11 by cross-layer signaling

Seamless video streaming over wireless links imposes strong demands on video codecs and the underlying network. It is not sufficient that only the video codec or only the radio adapts to changes in the wireless link quality; efforts should be applied in both layers, and - if possible - synchronized. Also, the disturbing effect of possible background traffic over the same shared medium has to be taken into account. In this article we present a communication architecture for video streaming over 802.11 that is capable of adapting to changes in the link quality and sharing of the wireless channel in various use scenarios. Experimental results show that substantial improvements in the quality of the video can be obtained by applying link adaptation and cross-layer signaling techniques.