曲柄摇杆机构的三圆图解设计法

这里探讨了对给定行程速比系数K，摇杆摆角ψ，另外再给定摇杆长度l3(机架长度l4)、曲柄长度l1(连杆长度l2)等，找出如何运用辅助圆图解设计曲柄摇杆机构的方法。     

Accumulation and Mixing of Oils in Jinghu Sag of Subei Basin： Constraints from Thermal Maturity Parameters

Oils in Jinghu sag are abundant with high content of polar compounds and have a low ratio of saturate to aromatic hydrocarbons and a high ratio of resin to asphaltene. The gross composition of oils in the Jinghu sag suggests typical immature to low mature characteristics. Some compounds with low thermal stability were identified. Light hydrocarbons, a carbon preference index, an odd even index, n-alkane and hopane maturity parameters show mature features and little differences in the maturity level among oils. Sterane isomerization parameters indicate an immature to low mature status of oil. Transfer of the sedimentary center during sedimentation has led to different thermal histories among subsags and thus generated oils with different maturities. On the basis of source analyses, four migration and accumulation patterns with different maturity can be classified. Combined with available information on mergers of source, reservoir and long distance oil lateral migration, mixing conditions were present in the Jinghu sag. Experimental results indicate that maturity variations are caused by mixtures of hydrocarbons with different maturity.     

Investigation on the Recrystallization Behaviour of Cold Deformed MP159 Alloy

The recrystallization behaviour of cold drawn MP159 alloy was investigated by optical and TEM examinations. It is found that the platelet ε phase in the MP alloy inhibits the recrystallization,and this effect makes the MP159 alloy with high recrystallization temperature of about 920℃.This inhibition mainly comes from the increasing of the interfacial energy, which results from the change of the coherent interfaces of (0001)hcp//(111)fcc into the incoherent interfaces when the recrystallizing grain fronts bypass the platelet ε martensite. The increasing of the interfacial energy also causes the dissolution of a few segments on the ε martensite platelets, which decreases the strength of the MP alloy     

燃气不换向蓄热式熔铝炉

蓄热式熔铝炉是一项先进节能技术，但至今在铝行业普及率不高，主要是一次性投资较大，维修费用较高。新近开发的燃气不换向蓄热式烧嘴，设备投资少、系统简化、设备故障少，使用安全可靠。     

RCC斜层平推铺筑法施工质量评估

RCC混凝土斜层平推铺筑法是一项新的施工工艺,本文通过芯样测试法对该工艺进行了全面细致的质量评估。     

光纤光栅最佳切趾函数的研究

采用耦合模理论，给出了用传输矩阵法计算光纤Bragg光栅（FBG）特性的方法，进而得到了在不同切趾函数形式下的FBG反射谱的数值解。通过理论分析，给出了最佳切趾函数反射谱和群时延特性曲线。     

采矿爆破地震安全距离与设计参数的应用研究

依据爆破安全规程给出了实际检测资料的处理方法。根据爆破设计和检测数据拟合结果的差异性，讨论了爆破地震安全距离S随设计经验参数K、α值的变化规律和范围，得出K取最大值，α取最小值能够最大限度保证现场建筑物安全的结论。     

螺杆泵举升性能模糊综合评价

对螺杆泵举升性能的影响因素进行了综合分析，建立了螺杆泵举升性能综合评价的指标体系，并利用模糊数学方法确立了该系统的综合评价模型，将该模型应用于2台GLB500—12型螺杆泵，其评价结果与在实际工作中的产液量和寿命的综合指标基本吻合，从而验证了该方法的正确性，为螺杆泵举升性能的综合评价提供了一种有效方法。     

T型薄壁管节点应力集中系数有限元分析

通过有限元的方法,分析了T型薄壁管节点受平面内弯矩作用下的疲劳行为,得到了应力最大值的位置和拟合出用于预测T型薄壁管节点受平面内弯矩作用下的应力集中系数的参数公式。