On the effect of geometrical designs and failure modes in composite axial crushing: A literature review

Composite materials have been known for its low density, ease in fabrication, high structural rigidity, and wide range applications, i.e. aeronautic applications and automotive industry. Due to this, extensive studies had been conducted to evaluate its axial crushing ability to replace metallic materials. In this paper, it reviewed the usage of fibre reinforced plastic composite (FRP) as an energy absorption application device. Failure modes and geometrical designs such as shapes, geometry and triggering effect have been studied where these factors affected on peak load and specific energy absorption significantly. Accordingly, numerical analysis for axial crushing of affected factors had been simulated to predict the failure mechanisms of FRP composites.     

Particulate matter emitted from ultrasonic humidifiers—Chemical composition and implication to indoor air

Household humidification is widely practiced to combat dry indoor air. While the benefits of household humidification are widely perceived, its implications to the indoor air have not been critically appraised. In particular, ultrasonic humidifiers are known to generate fine particulate matter (PM). In this study, we first conducted laboratory experiments to investigate the size, quantity, and chemical composition of PM generated by an ultrasonic humidifier. The mass of PM generated showed a correlation with the total alkalinity of charge water, suggesting that CaCO₃ is likely making a major contribution to PM. Ion chromatography analysis revealed a large amount of SO₄²⁻ in PM, representing a previously unrecognized indoor source. Preliminary results of organic compounds being present in humidifier PM are also presented. A whole-house experiment was further conducted at an actual residential house, with five low-cost sensors (AirBeam) monitoring PM in real time. Operation of a single ultrasonic humidifier resulted in PM_2.5 concentrations up to hundreds of μg m⁻³, and its influence extended across the entire household. The transport and loss of PM_2.5 depended on the rate of air circulation and ventilation. This study emphasizes the need to further investigate the impact of humidifier operation, both on human health and on the indoor atmospheric chemistry, for example, partitioning of acidic and basic compounds.     

Metabolomic Profiling of Plasma from Melioidosis Patients Using UHPLC-QTOF MS Reveals Novel Biomarkers for Diagnosis

To identify potential biomarkers for improving diagnosis of melioidosis, we compared plasma metabolome profiles of melioidosis patients compared to patients with other bacteremia and controls without active infection, using ultra-high-performance liquid chromatography-electrospray ionization-quadruple time-of-flight mass spectrometry. Principal component analysis (PCA) showed that the metabolomic profiles of melioidosis patients are distinguishable from bacteremia patients and controls. Using multivariate and univariate analysis, 12 significant metabolites from four lipid classes, acylcarnitine (n = 6), lysophosphatidylethanolamine (LysoPE) (n = 3), sphingomyelins (SM) (n = 2) and phosphatidylcholine (PC) (n = 1), with significantly higher levels in melioidosis patients than bacteremia patients and controls, were identified. Ten of the 12 metabolites showed area-under-receiver operating characteristic curve (AUC) >0.80 when compared both between melioidosis and bacteremia patients, and between melioidosis patients and controls. SM(d18:2/16:0) possessed the largest AUC when compared, both between melioidosis and bacteremia patients (AUC 0.998, sensitivity 100% and specificity 91.7%), and between melioidosis patients and controls (AUC 1.000, sensitivity 96.7% and specificity 100%). Our results indicate that metabolome profiling might serve as a promising approach for diagnosis of melioidosis using patient plasma, with SM(d18:2/16:0) representing a potential biomarker. Since the 12 metabolites were related to various pathways for energy and lipid metabolism, further studies may reveal their possible role in the pathogenesis and host response in melioidosis.     

A gradient-domain-based edge-preserving sharpen filter

As one of the most fundamental operations in computer graphics and computer vision, sharpness enhancement can enhance an image in respect of sharpness characteristics. Unfortunately, the prevalent methods often fail to eliminate image noise, unrealistic details, or incoherent enhancement. In this paper, we propose a new sharpness enhancement approach that can boost the sharpness characteristics of an image effectively with affinity-based edge preserving. Our approach includes three gradient-domain operations: sharpness saliency representation, affinity-based gradient transformation, and gradient-domain image reconstruction. Moreover, we also propose an evaluation method based on sharpness distribution for analyzing all sharpness enhancement approaches in respect of sharpness characteristics. By evaluating the sharpness distribution and comparing the visual appearance, we demonstrate the effectiveness of our sharpness enhancement approach.     

High Hole Mobility of GaSb Relaxed Epilayer Grown on GaAs Substrate by MOCVD through Interfacial Misfit Dislocations Array

The structural property of GaSb epilayers grown on semi-insulator GaAs (001) substrate by metalorganic chemical vapor deposition (MOCVD) using Triethylgallium (TEGa) and trimethylantimony (TMSb),was investigated by variation of the Sb:Ga (V/III) ratio.An optimum V/III ratio of 1.4 was determined in our growth conditions.Using transmission electron microscopy (TEM),we found that there was an interfacial misfit dislocations (IMF) growth mode in our experiment,in which the large misfit strain between epilayer and substrate is relaxed by periodic 90 deg.IMF array at the hetero-epitaxial interface.The rms roughness of a 300 nm-thick GaSb layer is only 2.7 nm in a 10 μm×10 μm scan from atomic force microscopy (AFM) result.The best hole density and mobility of 300 nm GaSb epilayer are 5.27×10 6 cm 3 (1.20×10 6) and 553 cm 2 ·V 1 ·s 1 (2340) at RT (77 K) from Hall measurement,respectively.These results indicate that the IMF growth mode can be used in MOCVD epitaxial technology similar to molecular beam epitaxy (MBE) technology to produce the thinner GaSb layer with low density of dislocations and other defects on GaAs substrate for the application of devices.     

Modeling of a membrane reactor system for crude palm oil transesterification. Part II: Transport phenomena

The mechanistic modeling of biodiesel production process in membrane reactor with the consideration of chemical reaction, phase equilibrium, and ultrafiltration is important for the membrane reactor design. In part II of this work, the chemical and phase equilibrium (CPE) model for crude palm oil transesterification reaction in the membrane reactor developed in part I is extended to an integration of CPE with modified Maxwell–Stefan model, which considers multicomponent mass transport phenomena of concentration polarization and intramembrane. A good fit of simulated permeate fluxes and apparent solute rejection to the experimental data shows that the model has a good prediction capability. Reversible fouling was found to be the major fouling and no pore plugging was observed. Simulation results verified that micelles were retained by the membrane at CPO:MEOH molar ratio of 1:24 and catalyst concentration of 0.5 wt %. However, phase inversion happened when catalyst concentration of 0.05 and 0.1 wt % were used. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1981–1996, 2015     

Quality assurance of Chinese herbal medicines: Procedure for multiple‐herb extraction

A quality assurance (QA) procedure for multiple‐herb extraction, which takes into account the existence of common chemical markers and multiple‐herb‐extraction effects, has been developed for producing Chinese herbal medicines (CHMs) of consistent quality. The experimental method for determining related correlation function of the multiple‐herb‐extraction effect was designed. A systematic solution strategy was also developed to appropriately decompose the multiple‐herb extraction system into several subsystems for obtaining solution(s) and determining the overall behavior of the system. An example of QA of Danshen–Gegen (DG) decoction was used to demonstrate the QA procedure. An H9c2 cell assay was used to test the efficacy of consistent quality DG decoctions prepared by different herb combinations with different material costs of herbs. It was observed that a multiple‐herb‐extraction effect was present in the aqueous extraction of Danshensu and this effect was depended on the extraction solvent. The possible mechanism of this multiple‐herb‐extraction effect in the aqueous DG extraction was speculated to be the change of initial pH value of the aqueous extraction solvent by an unknown component from Gegen. The experimental chemical marker concentrations fell within ±10% of the specified chemical marker compositions by using the amount of herb from each herb class as predicted by the QA model. Furthermore, an H9c2 cell assay was used to test the efficacy of three consistent quality DG extracts, which were produced by different herb combinations with different material costs of herbs. The results showed that the three DG extracts provided consistent biological efficacy against menadione‐induced toxicity. This study extended a recently developed QA procedure of single‐herb extraction to multiple‐herb extraction. It provides a solution of QA in extraction, which is one of the most important unresolved problems in the modernization of traditional Chinese medicines. With this modified model and the companion experiments, the amount of herbs needed from different quality classes to produce a multiple‐herb formula CHM product decoction with consistent quality can be exactly determined. © 2014 American Institute of Chemical Engineers AIChE J 60: 4014–4026, 2014     

Elastic moduli of a liquid crystalline polymer and its in-situ composites

The elastic moduli of a liquid crystalline polyesteramide (LCP) and polycarbonate/LCP in-situ composites with 10 to 80 wt% of LCP have been measured as functions of draw ratio λ from 1 to 15 by an ultrasonic method. For the LCP, the sharp rise of the axial Young's modulus E₃ and the slight decreases of the transverse Young's modulus E₁ and the axial (C₄₄) and transverse (C₆₆) shear modulus with increasing λ result from the alignment of chains along the draw direction. E₁, C₄₄, and C₆₆ follow the lower bounds calculated using the series coupling scheme of the aggregate model. Although E₃ lies close to the lower bound at low λ, it follows the upper bound calculated according to the parallel coupling scheme at λ > 3. The elastic moduli of the composites have similar draw ratio dependences as those of the LCP. The strong increase in E₃ with increasing λ arises from the higher aspect ratio of the LCP domains in the composites and the improved molecular orientation within the domains. The reinforcement effect on the other moduli is much weaker, with E₁ and C₄₄ of the composites only 5 to 30% higher than those of polycarbonate at λ = 15. Since C₆₆ of the LCP decreases to a value below that of polycarbonate at λ > 2, there is a positive reinforcement effect at low λ but a negative effect at high λ.     

Nutritional constituents and antioxidant properties of indigenous kembayau (Dacryodes rostrata (Blume) H. J. Lam) fruits

The nutritional and antioxidant properties of peels, pulp and seeds of kembayau (Dacryodes rostrata) fruits were evaluated. Kembayau seeds and pulp were rich in fat, while peels had the highest ash contents. Potassium was the most prevalent mineral in peels (380.72-1112.00 mg/100 g). In kembayau fruits, total flavonoid content (1012.74-28,022.28 mg rutin equivalent/100 g) was higher than total phenolic and total monomeric anthocyanin contents. Kembayau seeds exhibited high flavonoid and phenolic contents compared to the contents in peels and pulp. Antioxidant capacities were also higher in seeds as typified by trolox equivalent antioxidant capacity assay (51.39-74.59 mmol TE/100 g), ferric reducing antioxidant power assay (530.05-556.98 mmol Fe²⁺/100 g) and by 1,1-diphenyl-2-picryl hydrazyl radical scavenging activity (92.18-92.19%) when compared to peels and pulp. Pulp and peels of kembayau fruit may be an important source of energy and minerals for human consumption, while seeds have a good potential as antioxidants.