Analysis of 24,444 surgical specimens accessioned over 55 years in an ophthalmic pathology laboratory

PURPOSE: To summarize the pathologic diagnoses of a large number of surgically-obtained specimens over an extended time period in a single ophthalmic pathology laboratory. METHODS: We analyzed the records of 24,444 surgically obtained specimens accessioned in the L.F. Montgomery Ophthalmic Pathology Laboratory, Emory University, Atlanta, GA between May 1941 and December 1995. Age, sex, topography, clinical procedure, and histologic diagnosis were entered into a database using the modified SNOMED coding system. The diagnosis of the surgically enucleated eyes were analyzed with respect to years of enucleation. RESULTS: The most common topographic area associated with a histologic diagnosis was the cornea (39.3%), followed by lens (16.0%), vitreous (12.0%), uvea (9.8%), eyelids (8.0%), conjunctiva (7.7%), retina (7.7%), and orbit (2.1%). The relative proportion of vitreous specimens has continuously increased and became the most common surgical specimen in 1995. The most common underlying disease of surgically enucleated eyes is trauma (40.9%), followed by ocular neoplasia (24.2%), 'surgical' diseases of the cornea, lens and retina including glaucoma (17.3%), vascular diseases (6.7%), and inflammatory conditions (6.7%). The relative frequency of trauma and ocular inflammation as a cause of enucleation decreased significantly (p < 0.05) over the time of the study period while the relative proportion of ocular neoplastic processes increased (p < 0.0001). CONCLUSIONS: The availability of new surgical techniques has caused a change in the relative frequencies of different ocular specimens submitted for histologic examination.     

预处理工艺对硬质合金与金刚石膜间粘结力的影响

在两种经不同预处理的硬质合金YG8基底上，采用微波等离子体化学气相沉积法，在微波功率2kW，压强4.0kPa和6.5kPa，CH4和H2流量分别为1.6cm/s和100.0cm/s的条件下生长金刚石薄膜。利用X射线衍射检测了金刚石薄膜是否存在，用拉曼光谱分析了薄膜的质量，用金相显微镜观察了薄膜的洛氏硬度压痕，标定并比较了不同预处理工艺膜与基底的结合力。实验结果表明，不同的预处理方法对于粘结力的影响不大，最主要的因素是钴含量的多少。     

Conductive Mechanism of Organic Conductor

Organic conductor is a kind of organic compound which has special electronic and magnetic properties. The research of the organic compounds has received considerable attention because of their potential applications in many areas. The molecular conductive units are theoretically investigated as well as their energy gap and charge distribution. The relationship of conductivity and micro-mechanism is discussed.     

一种支持QoS的拓扑自适应动态组播路由算法

YAM、QoSMIC、DSDMR等一类支持QoS的动态组播路由算法允许组播成员动态地加入和离开，同时为接收方提供多个可选择的组播接入路径，以满足不同应用的QoS需求。但这些算法普遍存在控制信令开销大和结点加入时延长，可扩展性不好等问题。本文在分析这些算法的基础上，提出改进的支持QoS的动态组播路由算法，即拓扑自适应动态组播路由（Topology Adaptive Dynamic Multicast Routing，TADMR）算法。该算法避免了以往算法中大部分盲目的路径搜索，并使结点加入时延不再受限于固定的等待时钟，而与网络拓扑相自适应。性能分析和仿真结果表明，该算法具有较低的控制信令开销和结点加入时延，适用于各种网络规模和群组规模，具有良好的可扩展性。     

新型高k栅介质材料研究进展

随着半导体技术的不断发展，MOSFET（metal-oxide-semiconductor field effect transistor）的特征尺寸不断缩小，栅介质等效氧化物厚度已小至nm数量级。这时电子的直接隧穿效应将非常显著，将严重影响器件的稳定性和可靠性。因此需要寻找新型高k介质材料，能够在保持和增大栅极电容的同时，使介质层仍保持足够的物理厚度来限制隧穿效应的影响。本文综述了研究高k栅介质材料的意义；MOS栅介质的要求；主要新型高k栅介质材料的最新研究动态；展望了高k介质材料今后发展的主要趋势和需要解决的问题。     

8Li次级束的产生

在北京串列加速器次级束流线上通过2 H(7Li,8Li) 1H逆运动学反应产生了用于核天体物理研究的8Li次级束。准直后的次级束纯度达到 80 %以上 ,对于 44MeV的7Li强度约为 3 0s- 1·pnA- 1,可以用来进行逆几何转移反应的实验测量。     

1998年昌江流域暴雨洪水分析

1998年昌江发生了建国以来最大洪水，文章从天气环流背景、降雨特征等方面分析这次洪水形成的特点和发展过程。     

Improvement of RCA transistor using RTA annealing after theformation of interfacial oxide

A polysilicon emitter RCA transistor (an ultra-thin interfacial oxide layer exists between polysilicon and silicon emitter) is presented which can operate at 77 K for the first time. An ultra-thin (1.5 nm) interfacial oxide layer is grown deliberately between polysilicon and silicon emitter using RCA oxidation and excellent device stability is obtained after rapid thermal annealing (RTA) treatment in nitrogen atmosphere. The RCA transistor exhibits good electrical performance at very low temperature for an emitter area of 3 × 8 μm². The maximum toggle frequency of a 1:2 static divider is 1.2 GHz and 732 MHz at 300 K and 77 K, respectively     

长距离钢带传动的张紧机构设计与应用

比较了几种长距离传动方式的特点与适用场合，重点探讨了实现长距离精密传动的技术要点。结合实际工程，完成了长距离钢带精密传动的应用，并指出张紧机构的设计与应用是钢带实现长距离精密传动的关键。为此文中对钢带传动的典型张紧机构进行了比较，并分析了这几类张紧机构的应用情况，有参考和应用价值。     

舰船水声隐身技术(二)

本文探讨了水声隐身性能对舰船战技术性能的影响 ,舰船水噪声的主要噪声源、水噪声的治理措施及其展望。