具有减少辨识参数的随机多变量极点配置自适应控制器

本文提出了一种新的限制输出个数减少随机多变量自适应控制中辨识参数的方法，并给出了减少辨识参数的极点配置自适应算法。虽然采用ｎ个输入１个输出的减少辨识参数的模型来设计控制器，但所提出的控制器能够保证被控系统的几个输出跟踪参考输入信号，仿真结果表明，所提出的方法是成功的。     

Association of angiotensin-converting enzyme gene I/D polymorphism with change in left ventricular mass in response to physical training

PURPOSE: To determine the radiologic characteristics of cystic dystrophy of the duodenal wall. MATERIALS AND METHODS: Ten patients with cystic dystrophy of the duodenal wall and chronic pancreatitis underwent ultrasonography (US) (n = 10), computed tomography (CT) (n = 10), endoscopic US (n = 5), and endoscopic retrograde cholangiopancreatography (ERCP) (n = 9). Cystic dystrophy of the duodenal wall was classified as either cystic or solid. The imaging findings were retrospectively analyzed and compared with findings at pancreatoduodenectomy (n = 10). RESULTS: The more frequent cystic type (n = 7) of cystic dystrophy of the duodenal wall was characterized by the presence of easily recognizable cystic lesions (diameter, more than 1 cm), located within the thickened wall of the second portion of the duodenum. The solid type (n = 3) of cystic dystrophy of the duodenal wall demonstrated fibrous thickening of the duodenal wall within which small cysts (diameter, less than 1 cm) were present. The intraduodenal cysts were usually elongated or bilobate with a thick wall. The thickening of the duodenal wall appeared as a solid layer between the duodenal lumen and the pancreas, hypoechoic at US, isoattenuating at unenhanced CT, and hypoattenuating in the early phase (after initiation of infusion of contrast material) and isoattenuating in the late phase (after completion of infusion) at contrast material-enhanced CT. Findings at retrospective analysis of CT and endoscopic US images were characteristic. CONCLUSION: Imaging modalities, notably CT and endoscopic US, helped establish the diagnosis of cystic dystrophy of the duodenal wall.     

Intrauterine transfusions influence fetal leukocyte counts and subsets

Histamine is an important mediator in allergic reactions, gastric acid secretions, and neurotransmission in the central nervous system. Basophils and mast cells are the main sources of histamine, which is formed from L-histidine by histidine decarboxylase (HDC). However, the regulatory mechanism of HDC in these cells remains unclear. We examined the regulation of HDC activity and gene expression using a unique human mast cell line, HMC-1, after stimulation with phorbol 12-myristate 13-acetate (PMA) or ionomycin. HDC activity was increased from 52.1+/-0.4 (mean+/-standard deviation) to 154+/-6.9, or 105.6+/-6.2 pmol/min/mg protein (n = 3), 4 hours after stimulation with PMA (10 ng/mL) or ionomycin (10[-6] M). Although actinomycin D had no effect on this increase, cycloheximide completely inhibited the increase caused by these stimuli. The population of HMC-1 cells containing HDC protein was increased after stimulation with either PMA or ionomycin as evaluated by immunocytochemical analysis with anti-HDC antibody as a marker. HMC-1 constitutively expressed HDC mRNA, and its level was not increased with these stimuli. These results suggest that the increase of HDC activity in HMC-1 induced by PMA or ionomycin is regulated at the translational level.     

离散Hopfield神经网络和联想记忆的开关电流技术实现

研究了离散Ｈｏｐｆｉｅｌｄ神经网络（ＤＨＮＮ）和联想记忆神经网络的开关电流技术实现，利用多权输入跨导，开关电流延迟器（ＳＩＤ）和可编程电流比较器（ＰＣＣ）实现了离散Ｈｏｐｉｅｌｄ神经网络，并提出了利用离散Ｈｏｐｆｉｅｌｄ神经网络实现自联想记忆时相应的开关电流电路，所提出了开关电流神经网络适宜于超大规模集成，能在低电压（如３．３Ｖ）下工作。     

超薄SiO2层的热生长

隧道小孔中超薄ＳｉＯ２的生长是ＥＥＰＲＯＭ电路制造的关键工艺之一。采用ＳＵＰＲＥＭ－Ⅲ工艺模拟程序对超薄ＳｉＯ２的热生长进行了工艺模拟，经过大量的工艺实验及优化，确定了超薄ＳｉＯ２的最佳生长条件，生长出的ＳｉＯ２性能良好，完全可满足ＥＥＰＲＯＭ研制的要求。     

Cr12钢的预处理工艺研究

本文研究了Ｃｒ１２钢经４种不同的预处理工艺处理后钢中碳化物的大小，数量，分布及钢的硬度，强度和韧性，试验结果表明，经调质处理，高温固溶淬火＋高温退火处理后，Ｃｒ１２钢中碳化物的大小，分布及其组织，性能均优于常规球化退火预处理的。通过扫描电镜对冲击断口的分析，初步探讨了新的预处理工艺提高韧性的原因。     

内蒙古煤系高岭土作为FCC催化剂基质的研究

研究两种内蒙古煤系高岭土（1^＃、2^＃）的化学组成、晶体结构并与苏州高岭土进行了比较。对三种高岭土进行酸改性，利用BET、吡啶-TPD和微反测试分别研究改性前后高岭土的性能特点。并将内蒙古高岭土1^＃与苏州高岭土采用半合成方法合成了FCC催化剂，测定了其裂化活性。研究结果表明，内蒙古1^＃具有较良好的晶体结构和化学组成，经酸改性后比表面积大大增加，具有合适的孔径分布，裂化活性较好，可以取代苏州高岭土作为FCC催化剂的基质。     

不同灌溉条件下的水稻需水规律及水分生产率分析

稻田需水量包括植株蒸腾、棵间蒸发、田间渗漏3部分。研究表明，水稻在充分供水条件下所形成的蒸腾量中包含了一部分无效蒸腾，无效蒸腾量的减少不会影响作物的生长发育，反而会有不同程度的增产和优质效应。节水灌溉技术的推广产生了明显的经济与社会效益。结合当地实际情况采用3种常见的灌溉方式探讨了不同灌溉方式下水稻的需水规律、灌概定额和生产率的差异，为水稻节水高效栽培提供理论与技术依据。     

石油钻机提升系统穿绳方法研究

目前国内外钻机大绳一般采用顺穿法或花穿法。分析了2种穿绳方法的受力特点,大绳顺穿时游车的受力不平衡,会发生倾斜和摆动;采用大绳花穿方法,避免了游车的倾斜和摆动,但造成大绳入轮槽的倾角大,大绳易脱槽。顺穿法一般在电动钻机上采用,主要考虑到电控操作提升系统比较平稳;花穿法一般在机械钻机上使用,以受力平衡来缓解气控操作带来的冲击载荷的影响。为了克服这2种穿绳方法的不足,提出了两行双联滑轮组顺穿法和双联滑轮组顺穿法,可以提高安全性,减少磨损。