银掺杂对二氧化钛晶型转变的影响

采用溶胶-凝胶法制备了银掺杂的TiO2粉末,用XRD分析了掺银TiO2胶体经不同温度热处理后的晶型转变。结果表明:与未掺银的TiO2粉末相比,掺银TiO2从锐钛矿相向金红石相转变的起始温度较高,而且锐钛矿-金红石相变的温区范围变窄,晶型转变过程较快。     

In situ composite of nano SiO2-P(VDF-HFP) porous polymer electrolytes for Li-ion batteries

Nano SiO₂-P(VDF-HFP) composite porous membranes were prepared as the matrix of porous polymer electrolytes through in situ composite method based on hydrolysis of tetraethoxysilane and phase inversion. SEM, TEM, DSC and AC impedance analysis were carried out. It is found that the in situ prepared nano silica was homogeneously dispersed in the polymeric matrix, enhanced conductivity and electrochemical stability of porous polymer electrolytes, and improved the stability of the electrolytes against lithium metal electrodes. The in situ composite method was found to be much better than the direct composite method in lowering the interfacial resistance between electrolyte and lithium metal electrode. Moreover, cycle test of lithium batteries using lithium metal as anode and sulfur composite material as cathode showed that the electrolyte based on in situ composite of silica presented stable charge-discharge behavior and little capacity loss of battery.     

Synthesis of superabsorbent resin by ultraviolet photopolymerization

Synthesis of superabsorbent resin (SAR) was achieved by a new method, that of direct UV photopolymerization, and in particular the synthesis of a SAR of acrylic acid–potassium acrylate copolymer by UV photopolymerization was investigated. Influences of ratio (mol) of acrylate monomer to acrylic acid monomer, photoinitiators, crosslinking agents, and exposure time of UV light on the water‐absorbent properties were investigated. The results showed that the water absorbency (Q) of SAR based on Irgacure 1700 or Irgacure 1800 was 545–530 mL/g, but under the same conditions Q was 450 mL/g for the SAR based on Irgacure 651. N,N′‐Methylene bisacrylamide, hydroethyl acrylate, and glycerol were used as crosslinking agents, of which N,N′‐methylene bisacrylamide was the most effective. It crosslinked the molecular chains through attending the copolymerization with acrylic acid (AA) and potassium acrylate. When the exposure time was 5 min, the value of Q was 1368 mL/g (the content of N,N′‐methylene bisacrylamide was 100 ppm). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1618–1624, 2004     

架空在“云”端的网络体系结构

随着近年来云技术的飞速发展,常规的数据网络在扩展性、带宽、规模、成本等方面都明显处于劣势地位,已经无法适应未来的发展需求。在这种情况下,云端网络技术在节约运算成本、提升公司运行效率方面有很好的效果。受到了企业的青睐。基于此本文对架空在“云”端的网络体系结构进行探讨。     

Random arithmetic formulas can be reconstructed efficiently

Informally stated, we present here a randomized algorithm that given black-box access to the polynomial f computed by an unknown/hidden arithmetic formula ? reconstructs, on the average, an equivalent or smaller formula \({\hat{\phi}}\) in time polynomial in the size of its output \({\hat{\phi}}\) . Specifically, we consider arithmetic formulas wherein the underlying tree is a complete binary tree, the leaf nodes are labeled by affine forms (i.e., degree one polynomials) over the input variables and where the internal nodes consist of alternating layers of addition and multiplication gates. We call these alternating normal form (ANF) formulas. If a polynomial f can be computed by an arithmetic formula μ of size s, it can also be computed by an ANF formula ?, possibly of slightly larger size s ^O(1). Our algorithm gets as input black-box access to the output polynomial f (i.e., for any point x in the domain, it can query the black box and obtain f(x) in one step) of a random ANF formula ? of size s (wherein the coefficients of the affine forms in the leaf nodes of ? are chosen independently and uniformly at random from a large enough subset of the underlying field). With high probability (over the choice of coefficients in the leaf nodes), the algorithm efficiently (i.e., in time s ^O(1)) computes an ANF formula \({\hat{\phi}}\) of size s computing f. This then is the strongest model of arithmetic computation for which a reconstruction algorithm is presently known, albeit efficient in a distributional sense rather than in the worst case.     

利用仿真软件优化电磁场与电磁波教学

针对电磁场与电磁波课程理论公式复杂、相关概念模型抽象的特点,结合长期积累的教学经验,利用软件仿真将电磁场定理模型、分布特性可视化,简化推导计算过程,优化课程结构、节省课时的同时提高了教学效果。     

Microcellular foaming of PE/PP blends

Three different polyethylene/polypropylene (PE/PP) blends were microcellular foamed and their crystallinities and melt strengths were investigated. The relationship between crystallinity, melt strength, and cellular structure was studied. Experimental results showed that the three blends had similar variation patterns in respect of crystallinity, melt strength, and cellular structure, and these variation patterns were correlative for each blend. For all blends, the melt strength and PP melting point initially heightened and then lowered, the PP crystallinity first decreased, and then increased as the PE content increased. At PE content of 30%, the melt strength and PP melting point were highest and the PP crystallinity was least. The blend with lower PP crystallinity and higher melt strength had better cellular structure and broader microcellular foaming temperature range. So, three blends had best cellular structure at PE content of 30%. Furthermore, when compared with PE/homopolymer (hPP) blend, the PE/copolymer PP (cPP) blend had higher melt strength, better cellular structure, and wider microcellular foaming temperature range, so it was more suited to be microcellular foamed. Whereas LDPE/cPP blend had the broadest microcellular foaming temperature range because of its highest melt strength within three blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4149–4159, 2007     

甲烷磺酸电镀Sn-Pb合金添加剂研究

介绍了国内外磺酸型Sn-Pb合金电镀添加剂近十年的研究历程现况并根据各组分的化学结构及其在电镀中所体现出的性质将添加剂分为Sn^2 离子稳定剂、光亮剂及分散剂三类。最后列出了新研制的甲烷磺酸Sn-Pb合金电镀添加剂的主要性能及具体工艺配方。     

基于Pro／E的VERICUT虚拟机床模型开发

虚拟机床建模是VERICUT中数控加工仿真的基础,以一个带升降台的3轴立式铣床为例,介绍VERICUT中虚拟机床模型在Pro／E系统中的创建、装配及输出过程,借以探讨二者的结合应用．该方法具有良好的通用性,可作为其它机床建模的参考．     

黄骅坳陷白水头断裂系统生长模式及其成因分析

在系统分析白水头断裂系统的断层组合、构造样式、主干断层及次级断层生长模式的基础之上,结合区域构造背景、伸展边界条件及断层间的相互作用,探讨了该断裂系统的形成机制.分析结果表明,区域构造背景下存在的伸展边界控制了整个白水头断裂系统总的构造格局.进一步证实了区内右旋走滑作用与伸展作用的相互耦合,致使次级断层沿走滑构造带出现转向或中断.断裂系统及系统内部断层间的运动学关系表明白水头断裂系统在古近纪是受两个构造动力控制,其一是地幔热作用引起岩石圈北西-南东向引张作用,其二是北北东向深断裂带的右旋剪切作用.