Synthesis of a terpolymer and a tetrapolymer using monomers of diallylamine salts and SO<Subscript>2</Subscript> and their application as antiscalants

An aqueous solution of diallylammonium salts (CH₂ = CHCH₂)₂NH⁺(CH₂)₃A^? having A^? as: CO₂ ^? (I), PO₃H₂ Cl^? (II) and SO₃ ^? (III) in 1:1:1 mol ratio underwent ammonium persulfate-initiated ter cyclopolymerization to yield pH-responsive zwitterionic polymer IV with random placements of the monomers in the same ratio. During dialysis, PO₃H₂Cl^? of the incorporated monomer units of II upon depletion of HCl became PO₃H^?. Likewise, azobisisobutyronitrile-initiated cyclopolymerization of I, II, III, and SO₂ in a mole ratio of 1:1:1:3 provided pH-responsive tetrapolymer V in over 90 % yield with random and alternative placements of I–III and SO₂ units, respectively, in the same ratio as the feed. Polyzwitterions (PZs) IV and V were insoluble in salt-free water but soluble in the presence of salts. The critical salt concentrations required to promote water solubility of PZ IV were determined to be 0.356 M NaCl, 0.237 M NaBr and 0.128 M NaI, whereas for PZ V the corresponding values were found to be 2.25, 1.26 and 0.862 M, respectively. PZs IV and V were converted into anionic polyelectrolytes VI and VII upon basification with NaOH. The viscosity and antiscalant behaviors of VI and VII were examined. The polymers demonstrated remarkable scale inhibition efficacies; at a dose of 10 ppm, both IV (+NaOH) and V (+NaOH) delayed the precipitation of CaSO₄ from its supersaturated solution up to 920 and over 4000 min, respectively. For a small concentration of 5 ppm of polymer V, a scale inhibition of 100 % over 100 min verified it to be a potential effective antiscalant additive in reverse osmosis plants.     

Mechanical Properties and Microstructure of a Metakaolin-Based Inorganic Polymer Mortar Reinforced with Quartz Sand

Silicon - The synthesis, mechanical behaviour, and microstructure of metakaolin-based geopolymer mortar reinforced with quartz sand are presented in this investigation. Fine sand (quartz sand)...     

Efficient loading and entrapment of tamoxifen in human serum albumin based nanoparticulate delivery system by a modified desolvation technique

Herein, the poorly water-soluble drug, Tamoxifen (Tmx), was loaded in the amphipathic matrix of human serum albumin (HSA) nanoparticles by a modified desolvation method. In order to enhance the drug loading (DL) and drug entrapment efficiency (DEE) (<2% and 10%, respectively), ultrasonication of Tmx-HSA mixture was performed prior to desolvation process. Tmx loading and entrapment efficiency were optimized by employment of the response surface methodology (RSM)-central composite design (CCD) of experiments. Under the optimum conditions of 1.59 mg Tmx/ml concentration, 7.76 pH and 5 h incubation of HSA-Tmx, the DL of 6.7% and DEE of 74% are achievable. Particles with the average size of 195 nm, zeta potential of −21 mV and polydispersity index of 0.09 were produced under these conditions. A more sustained Tmx release behavior was observed from polyethylene glycol (PEG) conjugated nanoparticles in comparison to the non-PEGylated ones. The short-term stability investigation showed no alteration in physicochemical properties of nanoparticles at 4 and 37 °C, but small increase in nanoparticles size was observed after three months of storage at room temperature. This is the first report for efficient production of a Tmx delivery system based on HSA nanoparticles.     

Structural and magnetic properties of Pr–Ni substituted Ca0.5Ba0.5Fe12O19 hexa-ferrite nanoparticles

Effect of Pr–Ni substitution on structural and magnetic properties of Ca_0.5Ba_0.5−xPr_xNi_yFe_12−yO₁₉ (x=0.00–0.10 and y=0.00–1.00) prepared by the sol–gel auto combustion method were investigated. The XRD analysis confirmed the single phase M-type hexa-ferrite structure. The lattice parameters were found to increase as Pr–Ni content increases, which is attributed to the ionic size of the implicated cations. The Pr–Ni seems to be completely soluble in the lattice. Transmission electron microscopy reveals that the grain size decreases with increase of Pr–Ni substitution. The coercivity and remanent magnetization ranges from 1511 to 1925 (Oe) and 21.4 to 26.5 (emu/g), respectively. The coercivity values of all the samples fall in the range of M-type hexa-ferrites.     

Numerical Simulation of a Solar Kiln Design for Drying Timber with Different Geographical and Climatic Conditions in Australia

A numerical simulation for the modeling of solar kilns for hardwood timber drying with different boundary conditions has been developed in this work. This simulation has been used to predict the key behavior of the wood and the kiln itself under different geographical and weather conditions in Australia. This work, therefore, enables a site to be suggested that is likely to give the best kiln performance both in terms of the productivity and the quality of the end-use product. As test cases, realistic climatic conditions for three representative geographical locations in Australia, including Sydney (latitude 33.86°S), Melbourne (37.81°S), and Brisbane (27.46°S), have been considered in this simulation. Out of the three sites considered in this work, the fastest drying rates (and highest diffusion coefficients) were predicted in Brisbane. The highest level of instantaneous strain in the timber for this location was also predicted to be 0.0075 m/m, which is much less than the failure value (0.02 m/m). The moisture content distribution profile within the boards toward the end of the drying period was found to be almost uniform, which is likely to cause low degrade in the dried timber.     

pH Responsive Abelmoschus esculentus Mucilage and Administration of Methotrexate: In-Vitro Antitumor and In-Vivo Toxicity Evaluation

The rapid progression in biomaterial nanotechnology apprehends the potential of non-toxic and potent polysaccharide delivery modules to overcome oral chemotherapeutic challenges. The present study is aimed to design, fabricate and characterize polysaccharide nanoparticles for methotrexate (MTX) delivery. The nanoparticles (NPs) were prepared by Abelmoschus esculentus mucilage (AEM) and chitosan (CS) by the modified coacervation method, followed by ultra-sonification. The NPs showed much better pharmaceutical properties with a spherical shape and smooth surface of 213.4–254.2 nm with PDI ranging between 0.279–0.485 size with entrapment efficiency varying from 42.08 ± 1.2 to 72.23 ± 2.0. The results revealed NPs to possess positive zeta potential and a low polydispersity index (PDI). The in-vitro drug release showed a sustained release of the drug up to 32 h with pH-dependence. Blank AEM -CS NPs showed no in-vivo toxicity for a time duration of 14 days, accompanied by high cytotoxic effects of optimized MTX loaded NPs against MCF-7 and MD-MBA231 cells by MTT assay. In conclusion, the findings advocated the therapeutic potential of AEM/CS NPs as an efficacious tool, offering a new perspective for pH-responsive routing of anticancer drugs with tumor cells as a target.     

Radiation induced decontamination of Cr(Ⅵ), Cu(Ⅱ) and phenol in some tannery effluents

Industrialization has led to a number of environmental problems, such as release of toxic metals and other toxic organic and inorganic compounds to the environment. Among all, the rapid expansion of leather related industries in Pakistan have resulted in considerable environmental problems and effluents from processing of both domestic and imported hides and skins have increased pollution to alarming levels. Some tannery effluents of Peshawar area investigated in the present study showed high concentrations of Cr(Ⅵ) (2.7-12.6 mg/L), Cu(Ⅱ) (2.6-11.4 mg/L) and phenol (0.1-4.2 mg/L). These contaminants are very toxic and must be removed from effluents before releasing into water bodies. A new technique of gamma irradiation has been investigated to decrease the load of COD and concentrations of Cr(Ⅵ), Cu(Ⅱ) and phenol associated with tannery effluents to the permitted values. It was observed that concentration of Cr(Ⅵ) in the effluents can be brought to the permitted level by applying radiation dose of 3 kGy. A radiation dose of 2.5 kGy was required to remove more than 95% of Cu(Ⅱ) and 100 % degradation of phenol in tannery effluents could be achieved by only one kGy of radiation dose.     

Two new Protecting Groups for the Guanidino Function of arginine

Two new synthons, Fmoc-L-Arg(biphenyl-4-sulphonyl)-OH ( 8 ) and Fmoc-Arg(4-methoxy-3-t-butylbenzenesulphonyl)-OH ( 14 ), are prepared for the synthesis of arginine-containing peptides. These groups are cleaved by commonly employed trifluoroacetic acid and methanesulphonic acid. Kinetic studies reveal that extended bicyclic aromatic conjugation, as in biphenyl, slightly improves the acid lability compared to the electron-donating t-butyl group.     

LOW TEMPERATURE OXIDATION OF LOW RANK COALS

The low temperature oxidation of a Montana subbituminous coal was investigated using round bottom 100 ml flasks in constant temperature baths. The experiments were carried out in normal and oxygen enriched air at 30°C, 45°C and 70°C with particle sizes ranging from 4 mesh to 100 mesh. Periodic analysis of gas samples from the flasks provided the rate data. The reactivity of the as received coal was compared with that of the same coal dried (i) in high pressure steam and (ii) in hot water

A rate equation has been proposed incorporating the effects of oxygen diffusion and surface reaction. For higher oxygen concentration and smaller particle sizes, the zero order surface reaction was found to be controlling. The temperature dependency of the reaction rate was found to be well represented by the Arrhenius equation. The activation energy varied slightly under various conditions between 15 to 20 kca)/g mole

The reactivity of the hot water dried coal was found to be similar to that of the as received coal. Steam dried coal however, was found to be much less reactive.