Flexible and Autonomous Integrated System for Characterizing Metal Oxide Gas Sensor Response in Dynamic Environment

Characterization and calibration of gas sensor is a complex problem due to the dynamic behavior of gases and the limitations of current technology. This article reports a flexible, robust, and autonomous integrated system that is able to perform characterization on metal oxide-based gas sensors in dynamic environments. The system controls the concentration and flow of the relevant gases into the gas chamber and simultaneously measuring the sensor response. This feature allows the characterization of the sensor under continuous dynamic flow of gases similar to conditions on a robot or flow pipes. Several experiments have been performed on the system using hydrogen sulfide. The results provide information on the general characteristics of the sensor as well as its sensitivity. The noise levels were studied with different reference voltages. Overall, the results verify that the system is reliable and able to produce repeatable measurements.     

Analysis of Pipe Networks by the Finite Element Method

ABSTRACT

In this paper, the finite element technique used in the analysis and design of water distribution networks will be presented. The method was applied successfully to the solution of three different networks.

In order to demonstrate the feasibility of the approach and to show some merits and demerits of the finite element method, a comparison was made on a digital computer with the standard Hardy Cross method. In all cases the finite element method was shown to provide superior performance.

Moreover, the programmes were run on three different machines [Wang vs 100, Apple IIe, and IBM micro-computer] to show the effect of increasing storage capacity, machine accuracy, and time saving.     

Fast attack detection using correlation and summarizing of security alerts in grid computing networks

Due to the extensive growth of grid computing networks, security is becoming a challenge. Usual solutions are not enough to prevent sophisticated attacks fabricated by multiple users especially when the number of nodes connected to the network is changing over the time. Attackers can use multiple nodes to launch DDoS attacks which generate a large amount of security alerts. On the one hand, this large number of security alerts degrades the overall performance of the network and creates instability in the operation of the security management solutions. On the other hand, they can help in camouflaging other real attacks. To address these issues, a?correlation mechanism is proposed which reduces the security alerts and continue detecting attacks in grid computing networks. To obtain the more accurate results, a?major portion of the experiments are performed by launching DDoS and Brute Force (BF) attacks in real grid environment, i.e., the Grid??5000 (G5K) network.     

Generation of sodium hypochlorite (NaOCl) from sodium chloride solution using C/PbO_2 and Pb/PbO_2 electrodes

Two modified electrodes (Pb/PbO2 and C/PbO2) were prepared by electrodepositing a lead oxide layer on lead and carbon sub-strates. These modified electrodes were used as anodes for the generation of sodium hypochlorite (NaOCl) from sodium chloride solution. Different operating conditions and factors affecting the treatment process of NaOCl generation, including current density, pH values, con-ductive electrolytes, and electrolysis time, were studied and optimized. By comparison the C/PbO2 electrode shows a higher efficiency than the Pb/PbO2 electrode for the generation of NaOCl.     

Monte Carlo simulation on tensile failure process of unidirectional carbon fiber reinforced nano-phased epoxy

This paper presents an analytical approach which combines the modified shear-lag model and Monte Carlo simulation technique to simulate the tensile failure process of unidirectional T700 carbon reinforced composite. Two kinds of matrix were investigated in the present paper, one is neat epoxy and the other one is SiC nano-particle filled epoxy. In the model, the strength of the fiber elements is randomly allocated by the Monte Carlo method, the elastic properties of the matrix elements and the friction after the interfaces breakage are definitely allocated. Using this model, the deformation, damage and failure process of the composite are simulated on the microscopic level, the tensile stress–strain relationship is well predicted. The relationship between mechanical properties of the fiber, matrix and composites was discussed. The analysis also shows that, compared with the neat system, nano-phased composite exhibits 10% improvement in tensile strength, which agrees with the experimental data.     

Efficient surface reconstruction from contours based on two‐dimensional Delaunay triangulation

This paper introduces an efficient method for surface reconstruction from sectional contours. The surface between neighbouring sections is reconstructed based on the consistent utilization of the two‐dimensional constrained Delaunay triangulation. The triangulation is used to extract the parametric domain and to solve the problems associated with correspondence, tiling and branching in a general framework. Natural distance interpolations are performed in order to complete the mapping of the added intermediate points. Surface smoothing and remeshing are conducted to optimize the initial surface triangulations. Several examples are presented to demonstrate the effectiveness and efficiency of the proposed approach. Copyright © 2005 John Wiley & Sons, Ltd.     

Innovative methodology to improve the quality of electronic engineering formation through teaching industrial computer engineering

An innovative educational methodology adapted to the requirements of a new era with new societal and industrial challenges for electronic engineers is proposed in this paper. This active methodology, known as the Educational Innovation Project (EIP), is being studied in the Electronic Engineering (EE) degree of the Higher Technical School of Design Engineering at the Polytechnic University of Valencia, Valencia, Spain. The main objective of the EIP methodology is to improve the process of teaching and learning in order to increase student success. To accomplish this objective, the EIP method addresses various issues. From an organizational viewpoint, different structural aspects of the EE degree have been adapted, such as balancing and integrating lectures and laboratory sessions, advancing into interdisciplinary studies coordinated among all the subjects of the course, and strengthening the work in teams to tackle real engineer problems. The industrial computer engineering (ICE) subject is taken as a reference to show how these aspects have been applied. Regarding the faculty, lecturers participate in an open and permanent process of further training; attitudes toward cooperation and exchanges of experience among them are promoted; and research and reflection on new methodologies is encouraged. One of the challenges of the implementation of the EIP project is the development of multidisciplinary projects by team workers. The knowledge acquired from all the subjects is put into practice through the development of a common project to undertake real engineering problems.     

Performance Measurement in Construction

Performance measurement has been subject to a considerable amount of research and attention over the past 15 years. The inadequacy of traditional financially based performance measurement systems and the introduction of nonfinancial measures have been the triggers for much of this research. The purpose of this paper is to review the main performance measurement frameworks and their application by U.K. construction firms and to identify gaps in knowledge and practice that suggest future research. The contemporary performance measurement frameworks are reviewed, including the Balanced Scorecard and the European Foundation for Quality Management Excellence Model. The status of performance in the U.K. construction industry is discussed, in addition to project/operational-level performance measurement and the linkage between performance measurement and strategic management. Gaps in knowledge and practice are overviewed both in general and for the construction industry in specific, thus suggesting future research.     

Competitive Sperm-Marked Beetles for Monitoring Approaches in Genetic Biocontrol and Studies in Reproductive Biology

Sperm marking provides a key tool for reproductive biology studies, but it also represents a valuable monitoring tool for genetic pest control strategies such as the sterile insect technique. Sperm-marked lines can be generated by introducing transgenes that mediate the expression of fluorescent proteins during spermatogenesis. The homozygous lines established by transgenesis approaches are going through a genetic bottleneck that can lead to reduced fitness. Transgenic SIT approaches have mostly focused on Dipteran and Lepidopteran pests so far. With this study, we provide sperm-marked lines for the Coleopteran pest model organism, the red flour beetle Tribolium castaneum, based on the β2-tubulin promoter/enhancer driving red (DsRed) or green (EGFP) fluorescence. The obtained lines are reasonably competitive and were thus used for our studies on reproductive biology, confirming the phenomenon of ‘last-male sperm precedence’ and that the spermathecae are deployed for long-term sperm storage, enabling the use of sperm from first mating events even after secondary mating events for a long period of time. The homozygosity and competitiveness of the lines will enable future studies to analyze the controlled process of sperm movement into the long-term storage organ as part of a post-mating cryptic female choice mechanism of this extremely promiscuous species.