Production of bioethanol from waste money bills – A new cellulosic material for biofuels

Waste money bills that are no longer legal tender are non-recyclable and are usually destroyed. In this study, we used this cellulose-rich material for bioethanol fermentation for the first time. Glucose production was enhanced by using diluted H₂SO₄ during pretreatment. Different incubation periods were tested for saccharification and subsequent bioethanol fermentation. The highest yield of glucose (41.90 mg/ml) was shown to increase with 27.20% and 25.90% respectively by increasing the reaction period by 30 min and by increasing the acid concentration by 0.5%. Bioethanol production was enhanced by adding 0.4 mM benzoic acid under anoxic condition. In accordance with three different conditions, the highest amount of bioethanol (22.01 mg/ml) was obtained and bioethanol fermentation was increased by 59.38%, 110.02% and 64.13% respectively with 30 min of reaction periods, 0.5% of acid concentrations and under anoxic condition with benzoic acid. This procedure for the production of bioethanol from a waste material would reduce waste money bill management costs and make a profit from ethanol.     

Synthesis and Characterization of Molecularly Imprinted Polymer Membrane for the Removal of 2,4-Dinitrophenol

Molecularly imprinted polymers (MIPs) were prepared by bulk polymerization in acetonitrile using 2,4-dinitrophenol, acrylamide, ethylene glycol dimethacrylate, and benzoyl peroxide, as the template, functional monomer, cross-linker, and initiator, respectively. The MIP membrane was prepared by hybridization of MIP particles with cellulose acetate (CA) and polystyrene (PS) after being ground and sieved. The prepared MIP membrane was characterized using Fourier transform infrared spectroscopy and scanning electron microscopy. The parameters studied for the removal of 2,4-dinitrophenol included the effect of pH, sorption kinetics, and the selectivity of the MIP membrane. Maximum sorption of 2,4-nitrophenol by the fabricated CA membrane with MIP (CA-MIP) and the PS membrane with MIP (PS-MIP) was observed at pH 7.0 and pH 5.0, respectively. The sorption of 2,4-dinitrophenol by CA-MIP and PS-MIP followed a pseudo–second-order kinetic model. For a selectivity study, 2,4-dichlorophenol, 3-chlorophenol, and phenol were selected as potential interferences. The sorption capability of CA-MIP and PS-MIP towards 2,4-dinitrophenol was observed to be higher than that of 2,4-dichlorophenol, 3-chlorophenol, or phenol.     

A novel self-assembly approach to form tubular poly(diphenylamine) inside the mesoporous silica

MCM-41 materials were synthesized using alkyl(decosane, dodecyl)trimethyl ammonium bromide as structure directing surfactants. X-ray diffraction (XRD) analysis and nitrogen adsorption measurements reveal that the pores are hexagonal with tunable textural properties through the choice of surfactant and experimental condition. Poly(diphenylamine), PDPA was entrapped into the pores of MCM-41 by initial sorption of diphenylamine (DPA, monomer) in a medium (napthalein sulfonic acid) that provides self-assembling of DPA inside the pores and subsequent oxidative of polymerization with peroxydisulphate. Clear presence of an additional peak (around 9-10°) in XRD pattern for the DPA loaded MCM-41 provides evidence for self-assembled structure. Upon polymerization the self-assembly of DPA molecules resulted tubular PDPA inside the pores of MCM-41. PDPA thus formed shows different electronic property than the PDPA prepared by conventional method. XRD and FTIR spectroscopic analysis of PDPA loaded MCM-41 clearly informs that PDPA are entrapped in channels of MCM-41.     

Transport of lithium through a supported liquid membrane of LIX54 and TOPO in kerosene

A mathematical transport model is developed for the extraction of lithium from dilute synthetic solution, simulating geothermal water, using a supported liquid membrane (SLM) of LIX54 (major component is -acetyl-m-dodecylacetophenone) and TOPO (tri-n-octylphosphine oxide) in kerosene. The model is based on fundamental mass transfer and kinetics mechanisms that account for all possible transport resistances. The model is solved numerically and is used to investigate the effect of various extraction conditions and membrane support characteristics. Reasonable agreement is found between the predicted and the experimental results reported in literature.     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

A novel approach for extracting cellulose nanofibers from lignocellulosic biomass by ball milling combined with chemical treatment

Cellulose nanofibers (CNFs) were isolated from kenaf fibers and wheat straw by formic acid (FA)/acetic acid (AA), peroxyformic acid (PFA)/peroxyacetic acid (PAA), hydrogen peroxide (H₂O₂) treatment; and subsequently through ball milling treatment. Characterization of extracted cellulose and cellulose nanofibers was carried out through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), and thermogravimetric analysis (TGA). TEM images showed that extracted cellulose nanofibers had diameter in the range of 8–100 nm. FTIR and XRD results implied that hemicellulose and lignin were mostly removed from lignocellulosic biomass with an increase in crystallinity, and isolation of cellulose nanofibers was successful. The TGA results showed that decomposition temperature of cellulose nanofibers increased by about 27°C when compared with that of untreated lignocellulosic biomass. No significant change was observed in the decomposition temperature of bleached celluloses after ball milling. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42990.     

Synthesis,Characterization and Catalytic Activities of Palladium(II) Nitroaryl Complexes

Two palladium(II) nitroaryl complexes trans-[bromo(p-nitrophenyl)bis(triphenylphosphine)palladium(II)] 1 and trans-[bromo(2,4-dinitrophenyl)bis(triphenylphosphine)palladium(II)] 2 have been synthesized. The complexes were characterized by FTIR and NMR (¹H, ¹³C and ³¹P) spectroscopy and elemental analysis. The molecular structure of complex 2, as confirmed by X-ray crystallography, reveals that the Pd atom and its neighboring groups (two PPh₃, Br and phenylene group) lie in a slightly distorted square plane. In the UV–Vis spectra of the complexes 1 and 2, the palladium to aryl charge transfer bands were observed. The emission peaks from the singlet excited states (S₁ → S₀) were observed in the photoluminescence spectra of the complexes. The thermal stability of the complexes has been studied by thermal gravimetric analysis (TGA). TGA data showed that both complexes are thermally stable up to 200 °C, and complex 1 is more stable than 2. The catalytic efficiency of the new palladium(II) complexes was studied as demonstrated using the Sonogashira coupling reactions with good yields. The experimental results suggest that the Sonogashira coupling reactions can be performed at moderate temperature (50 °C) using these new palladium(II) complexes as catalysts.     

Microbial fuel cell-based sensor for Enterobacter sp. KBH6958 activity monitoring during hydrogen production: the effects of pH and glucose concentration

Journal of Applied Electrochemistry - A microbial fuel cell (MFC) is an electricity-generating device utilising electrochemically active microorganisms as biocatalysts. Using MFC as a biosensor to...     

Comparison of different extraction methods for the extraction of major bioactive flavonoid compounds from spearmint (Mentha spicata L.) leaves

Different bioactive flavonoid compounds including catechin, epicatechin, rutin, myricetin, luteolin, apigenin and naringenin were obtained from spearmint (Mentha spicata L.) leaves by using conventional soxhlet extraction (CSE) and supercritical carbon dioxide (SC-CO₂) extraction at different extraction schemes and parameters. The effect of different parameters such as temperature (40, 50 and 60 °C), pressure (100, 200 and 300 bar) and dynamic extraction time (30, 60 and 90 min) on the supercritical carbon dioxide (SC-CO₂) extraction of spearmint flavonoids was investigated using full factorial arrangement in a completely randomized design (CRD). The extracts of spearmint leaves obtained by CSE and optimal SC-CO₂ extraction conditions were further analyzed by high performance liquid chromatography (HPLC) to identify and quantify major bioactive flavonoid compounds profile. Comparable results were obtained by optimum SC-CO₂ extraction condition (60 °C, 200 bar, 60 min) and 70% ethanol soxhlet extraction. As revealed by the results, soxhlet extraction had a higher crude extract yield (257.67 mg/g) comparing to the SC-CO₂ extraction (60.57 mg/g). Supercritical carbon dioxide extract (optimum condition) was found to have more main flavonoid compounds (seven bioactive flavonoids) with high concentration comparing to the 70% ethanol soxhlet extraction (five bioactive flavonoids). Therefore, SC-CO₂ extraction is considered as an alternative process compared to the CSE for obtaining the bioactive flavonoid compounds with high concentration from spearmint leaves.