Silicon based on-chip antenna using an LC resonator for near-field RF systems

This paper presents the silicon based on-chip antenna using a LC resonator. The proposed antenna consists of a stacked capacitor and a spiral inductor on silicon substrate. The spiral inductor structure without underpass was proposed for improvement the performance of the silicon based-antenna. The resonant frequency of the fabricated antenna was measured as 465 MHz. Its return loss was 23.4 dB at resonant frequency. The antenna has a gain of ?35.75 dBi due to small size and silicon substrate. However, the fabricated antenna has good performance in the near-field.     

Upgrading Titanium Ore Through Selective Chlorination Using Calcium Chloride

To develop a simple and effective process for upgrading low-grade titanium ore (ilmenite, mainly FeTiO₃), a new selective chlorination process based on the use of calcium chloride (CaCl₂) as the chlorine source was investigated in this study. Titanium ore and a titanium ore/CaCl₂ mixture were placed in two separate crucibles inside a gas-tight quartz tube that was then positioned in a horizontal furnace. In the experiments, the titanium ore in the two crucibles reacted with either HCl produced from CaCl₂ or CaCl₂ itself at 1100 K (827 °C), leading to the selective removal of the iron present in the titanium ore as iron chlorides [FeCl _x (l,g) (x = 2, 3)]. Various kinds of titanium ores produced in different countries were used as feedstock, and the influence of the particle size and atmosphere on the selective chlorination was investigated. Under certain conditions, titanium dioxide (TiO₂) with purity of about 97 pct was directly obtained in a single step from titanium ore containing 51 pct TiO₂. Thus, selective chlorination is a feasible method for producing high purity titanium dioxide from low-grade titanium ore.     

用于先进PCB制造工艺的叠层封装

在20世纪90年代,球栅阵列封装(BGA)和芯片尺寸封装(CSP)在封装材料和加工工艺方面达到了极限。这2种技术如同20世纪80年代的表面安装器件(SMD)和70年代通孔安装器件(THD)一样,在电学、机械、热性能、尺寸、质量和可靠性方面达到最大值。目前,三维封装正在成为用于未来采用的先进印制板(PCB)制造工艺的下一个阶段。它们可以分为圆片级封装、芯片级封装、和封装面。叠层封装(PoP)是一种封装面叠层封装类型的三维封装技术[15]。     

Source identification of nitrous oxide on autotrophic partial nitrification in a granular sludge reactor

Emission of nitrous oxide (N₂O) during biological wastewater treatment is of growing concern since N₂O is a major stratospheric ozone-depleting substance and an important greenhouse gas. The emission of N₂O from a lab-scale granular sequencing batch reactor (SBR) for partial nitrification (PN) treating synthetic wastewater without organic carbon was therefore determined in this study, because PN process is known to produce more N₂O than conventional nitrification processes. The average N₂O emission rate from the SBR was 0.32 ± 0.17 mg-N L⁻¹ h⁻¹, corresponding to the average emission of N₂O of 0.8 ± 0.4% of the incoming nitrogen load (1.5 ± 0.8% of the converted NH₄⁺). Analysis of dynamic concentration profiles during one cycle of the SBR operation demonstrated that N₂O concentration in off-gas was the highest just after starting aeration whereas N₂O concentration in effluent was gradually increased in the initial 40 min of the aeration period and was decreased thereafter. Isotopomer analysis was conducted to identify the main N₂O production pathway in the reactor during one cycle. The hydroxylamine (NH₂OH) oxidation pathway accounted for 65% of the total N₂O production in the initial phase during one cycle, whereas contribution of the NO₂⁻ reduction pathway to N₂O production was comparable with that of the NH₂OH oxidation pathway in the latter phase. In addition, spatial distributions of bacteria and their activities in single microbial granules taken from the reactor were determined with microsensors and by in situ hybridization. Partial nitrification occurred mainly in the oxic surface layer of the granules and ammonia-oxidizing bacteria were abundant in this layer. N₂O production was also found mainly in the oxic surface layer. Based on these results, although N₂O was produced mainly via NH₂OH oxidation pathway in the autotrophic partial nitrification reactor, N₂O production mechanisms were complex and could involve multiple N₂O production pathways.     

Determination of number-average and weight-average molecular weights of polymer sample from diffusion and sedimentation velocity measurements in theta solvent

Several methods to determine number-average molecular weight M_n and weight-average molecular weight M_w, of a polymer sample are proposed from diffusion and sedimentation velocity measurements at the θ point. According to these methods, M_n and M_w are determined from the diffusion constant vs. molecular weight relationship, and also from the equations of Svedberg and Flory–Mandelkern, using the 2nd-order and the –2nd-order diffusion constants. These methods have been applied to four samples of polydisperse polystyrene in the θ solvent, cyclohexane at 35°C. It was experimentally ascertained that M_n and M_w of each sample determined by the present methods were in good agreement with the results of column fractionation, light scattering, and calculated values from molecular weight distribution curve within experimental errors. It is concluded that the present methods are useful for determining M_n and M_w, since the reliabilities of M_n and M_w values, which are fundamental quantities of polymer characterization, can be raised by comparing the experimental data observed by conventional methods such as osmotic pressure, light scattering, and the Archibald method with those observed by the present methods.     

Quantification of anaerobic ammonium-oxidizing bacteria in enrichment cultures by real-time PCR

The anaerobic ammonium-oxidizing (ANAMMOX) bacteria were enriched from a rotating disk reactor (RDR) biofilm in semi-batch cultures. Based on fluorescence in situ hybridization (FISH) analysis, this enrichment led to a relative population size of 36% ANAMMOX bacteria. Phylogenetic analysis revealed that all the detected clones were related to the previously reported ANAMMOX bacteria, Candidatus Brocadia anammoxidans (AF375994), with 92% sequence similarity. Furthermore, we successfully developed a real-time polymerase chain reaction (PCR) assay to quantify populations of ANAMMOX bacteria in the enrichment cultures. For this real-time PCR assay, PCR primer sets targeting 16S ribosomal RNA genes of ANAMMOX bacteria were designed and used. The quantification range of this assay was 6 orders of magnitude, from 8.9x10(1) to 8.9x10(6) copies per PCR, corresponding to the detection limit of 3.6x10(3) target copies mL(-1). A significant correlation was found between the increase in copy numbers of 16S rRNA gene of ANAMMOX bacteria and the increase in nitrogen removal rates in the enrichment cultures. Quantifying ANAMMOX bacterial populations in the enrichment culture made it possible to estimate the doubling time of the enriched ANAMMOX bacteria to be 3.6 to 5.4 days. The real-time PCR assay gave comparable population sizes in the enrichment cultures with the FISH results. These results suggest that the real-time PCR assay developed in this study is useful and reliable for quantifying the populations of ANAMMOX bacteria in environmental and engineering samples.     

Insulation characteristics and its evaluation method of N2 gas for nonstandard lightning impulse waveforms

Until recently, SF₆ gas has widely been used as the best insulating medium in substation equipment. However, SF₆ gas was specified to be a greenhouse gas at COP3 in 1997 because of its high global warming potential (GWP), and alternative insulation gases to SF₆ have been sought for a long time. Alternatives using the natural gases are considered to be suitable, but none of them show better properties for insulation as well as good environmental compatibility. Therefore, it is necessary to rationalize the equipment insulation level and reduce the test voltage of electric power apparatus to as low a level as possible. The actual lightning surge waveform (so‐called nonstandard lightning impulse waveform) occurring in the actual field is different from the standard lightning impulse waveform (1.2/50 μs). There are many cases in which the actual lightning surge waveform has a steep rise and large decay of overvoltage, and the insulation requirements are not as severe as those for the standard lightning impulse waveform. In this paper, we focused our research on N₂ gas as an SF₆ substitute and investigated the insulation characteristics of N₂ gas for a single‐frequency oscillatory waveform with various frequencies from 2.7 to 20.0 MHz and damping ratios. Based on the experimental results, it might be possible to reduce the test voltage of N₂ gas insulation by evaluating the crest value of the actual lightning surge waveform that has been converted into an equivalent standard lightning impulse waveform. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(2): 10–20, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20754     

Tribochemical Surface Reaction and Lubricating Oil Film

A radioactive tracer technique was used to investigate a tribo-chemical surface reaction obtained by a thrust collar type friction Machine. Radioactive dibenzyl disulfide labeled with sulfur-35 was used as an additive. Steel and copper disks were used as friction specimens.

Radioactive copper sulfide on the friction surface was quantitatively measured with a G-M tube, and a kinetical analysis of the reaction was carried out.

The friction coefficient decreased linearly depending on the amount of surface produced on the friction surface. This dependency was accompanied by adsorption of dibenzyl disulfide, which made a more effective lubricating oil film and was enhanced by the sulfide on the friction surface.

The results of kinetical analysis were explained effectively by considering the oil film behavior related to the adsorptive action of the surface sulfide.     

Effects of α-tocopherol level in raw venison on lipid oxidation and volatiles during storage

Relationships between α-tocopherol concentration in the muscle and development of lipid oxidation or volatiles in raw venison were studied. Fourteen Japanese Shika Deer (Cervus nippon) were fed various amounts (0–3.0 g of α-tocopheryl acetate per animal) during the different periods (0–37 days) and then M. longissimus thoracium et lumborum (LD muscles) with a range of α-tocopherol concentrations (4.1–15.1 mg/kg tissue) were obtained. For stabilizing the lipid during storage for 11 days under air, over ca. 9 mg of α-tocopherol per kg tissue were required based on levels of 2-thiobarbituric acid reacting substances (TBARS) numbers. Nine compounds were identified in headspace volatiles, and one of the volatiles was hexanal which has been recognized as off-flavour component. For depressing the hexanal evolution, at least ca. 9 mg of α-tocopherol per kg tissue were also required for 11 days’ storage. This value was much higher than other species. The reasons for higher requirement of α-tocopherol were possibly due to the higher concentration of unsaturated fatty acid and myoglobin in venison.     

Effect of casting method on castability of titanium and dental alloys

Titanium, once considered to be difficult to cast because of its relatively high melting point and strong chemical affinity, can now be acceptably cast using newly developed casting apparatus. The objectives of this study were to examine the castability of commercially pure (CP) titanium using an ultra high-speed centrifugal casting machine and a pressure difference-type casting unit and to compare the castability of titanium with that of conventional dental casting alloys. To determine castability, two types of patterns were used: a mesh pattern of 22 × 24 mm cut polyether thread sieve, and a saucer pattern (24 mm diameter) perforated to create four T-shaped ends. The casting equipment significantly affected the mold filling of both patterns . The castability indices obtained from both patterns of CP titanium cast in the centrifugal casting machine were significantly better than the indices of the castings produced in the pressure-difference casting unit. The radiographs of the saucer pattern cast in the centrifugal casting machine showed some pores that were fewer and smaller in size than the pores found in castings made in the pressure-difference unit. When the ultra high-speed centrifugal casting machine was used with the manufacturers recommended mold material, the castability of titanium was similar to that of gold alloy or Ni-Cr alloy cast by conventional means.