20.1%‐efficient crystalline silicon solar cell with amorphous silicon rear‐surface passivation

We have developed a crystalline silicon solar cell with amorphous silicon (a‐Si:H) rear‐surface passivation based on a simple process. The a‐Si:H layer is deposited at 225°C by plasma‐enhanced chemical vapor deposition. An aluminum grid is evaporated onto the a‐Si:H‐passivated rear. The base contacts are formed by COSIMA (contact formation to a‐Si:H passivated wafers by means of annealing) when subsequently depositing the front silicon nitride layer at 325°C. The a‐Si:H underneath the aluminum fingers dissolves completely within the aluminum and an ohmic contact to the base is formed. This contacting scheme results in a very low contact resistance of 3.5 ±0.2 mΩ cm² on low‐resistivity (0.5 Ω cm) p‐type silicon, which is below that obtained for conventional Al/Si contacts. We achieve an independently confirmed energy conversion efficiency of 20.1% under one‐sun standard testing conditions for a 4 cm² large cell. Measurements of the internal quantum efficiency show an improved rear surface passivation compared with reference cells with a silicon nitride rear passivation. Copyright © 2005 John Wiley & Sons, Ltd.     

Mechanical flange forming in steel and copper foil

Flange forming is a process which is wide spread in macro range for blanks with thicknesses from less than 1?mm up to several millimeters. Flange formed geometries are used as preforms for threads but also as device to give guidance and contact face to bolts and axles in sheet metal. A great advantage of flange forming compared to other machining processes is low process cycle time combined with high material utilization. Thus, a reasonable repertoire of knowledge has been gained for flange forming in macro range. Due to ongoing miniaturization of today??s products, flange forming is an interesting process applicable in micro range as well whereas size effects do not generally allow transfer of process limits from macro to micro range. Therefore the maximum flaring ratio for flange forming in micro range for sheet metal foil of 10?C25???m for a stainless steel 1.4301 and Copper E-Cu58 is investigated and compared with results in macro range. It is shown that the maximum flaring ratio decreases with decreasing sheet metal thickness. The resulting flange heights of experiments are compared with theoretical estimations which show a good accordance.     

Neuregelungen in Vorarlberg zu Spielräumen

Ein Ma?nahmenpaket, bestehend aus dem Spielraumgesetz, dem Beschluss von entsprechenden F?rderungsrichtlinien sowie Novellierungen des Baugesetzes und der Kinderspielplatzverordnung und einer überarbeitung der Wohnbaufondsrichtlinie, soll dazu beitragen, dass sich das Bundesland Vorarlberg als besonders kinder- und jugendfreundliche Region etabliert. Hiefür gilt es, ?ffentliche und private Spielpl?tze und Freir?ume bedarfsgerecht zu erhalten, zu sanieren, neu zu errichten und untereinander zu vernetzen.     

A case study in the mechanical verification of fault tolerance

To date, there is little evidence that modular reasoning about fault-tolerant systems can simplify the verification process in practice. This question is studied using a prominent example from the fault tolerance literature: the problem of reliable broadcast in point-to-point networks subject to crash failures of processes. The experiences from this case study show how modular specification techniques and rigorous proof re-use can indeed help in such undertakings.