Behavioral and computational models of spatial attention.

Pigeons pecked for food in a spatially cued choice reaction time (RT) task. A brief (50-msec) white light appeared on a left or right key and probabilistically predicted the location (on either the left or right key) of a subsequent target stimulus. The time between cue and target onset (stimulus onset asynchrony), the base rate of left cues, and the probability that the cue correctly predicted the target (cue validity) were experimentally varied. The mean RT to respond to the target key was faster on correctly cued trials (defining a validity effect), decreased for both valid and invalid trials as stimulus onset asynchrony increased (defining an alerting effect), showed a variety of base-rate effects, and did not depend on cue validity. It is shown with a computational-processing model that dynamic interactions of short-term and associative memory processes are sufficient to produce these attention-like empirical phenomena. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Salvage therapy of advanced squamous cell carcinoma of the mouth cavity and oropharynx. Results of interstitial high-dose-rate brachytherapy combined with ablative tumor surgery

PURPOSE: The clinical effect of high-dose-rate (HDR) interstitial brachytherapy combined with tumor resection was investigated in this retrospective study on patients with recurrent oral and oropharyngeal squamous cell carcinoma. PATIENTS AND METHODS: Oral and oropharyngeal squamous cell carcinoma in 38 patients were treated over a period of 7 years (1988-1994) by HDR interstitial brachytherapy using Gammamed 12i equipment. Pretreatment of patients in terms of irradiation and surgery differed (33 irradiated with a total dose between 60.0 and 75.6 Gy, including 8 patients with additional surgery; 1 patient with surgery alone, and 4 patients without any pretreatment). Indications for interstitial brachytherapy differed according to individual responses to treatment and medical histories. RESULTS: Interstitial brachytherapy was successful in the majority of patients, i.e. complete remission: 12, partial remission: 19, no change: 2, progression: 5. Local control and overall survival including patients with surgical treatment was 59% and 81% at 6 months and 47% and 49% after 12 months, respectively. CONCLUSION: Interstitial HDR brachytherapy with Iridium 192 is recommended in patients with local recurrences or second primary carcinomas after previous external radiotherapy in the head and neck region. Combination of interstitial brachytherapy and surgery is preferable for these patients.     

Comparative studies on the enzymatic absorption of protein hydrolysates in the small intestines of the rat. 3. The absorption of trypsin, thermitatic and trypsin thermitatic wheat gluten hydrolysates in comparison with equimolar mixtures of free amino acids

Tryptic, thermitatic, and tryptic-thermitatic wheat-gluten hydrolyzates as well as their equimolar amino-acid mixture were perfused through proximal and distal parts of the intestine (10 cm length) of non-narcotized rats. The total amino-acid concentration of the perfused solution was 50 mM. The tryptic hydrolyzate showed a significantly lower absorption of nitrogen and total amino acids than the amino-acid mixture. Both the supplied forms were very different as to their absorption pattern of the amino acids. The high variability of the percental absorption of the individual amino acids of the tryptic hydrolyzate results in a high coefficient of variation. The absorption of nitrogen and total amino acids from thermitatic and tryptic-thermitatic hydrolyzates is equal to that from the amino-acid mixture. In a peptidic form glutamic acid is more rapidly absorbed from the two hydrolyzates, and methionine from the tryptic-thermitatic hydrolyzate in both the intestinal parts. As to alanine and glycine this concerns only the distal intestinal part for both the hydrolyzates. There are no differences between the absorption patterns of the two hydrolyzates but in comparison with the amino-acid mixture and the tryptic hydrolyzate differences were evident. The coefficients of variation of both the hydrolyzates are significantly lower as compared to those of the tryptic hydrolyzate and the amino-acid mixture. All forms of supply are more rapidly absorbed in the distal than in the proximal part of the intestine.     

Precision of micromilled x-ray masks and exposures

 Micromechanical milling has been shown to be a rapid and direct method for the fabrication of structures with the geometry and size suitable for use as x-ray mask absorbers. While the micromilling process can not duplicate the size and resolution of absorber patterns created by high energy electron beam or optical lithography methods, micromilling can repeatedly create absorber line widths down to 10 micrometers, or less, with a one-sigma tolerance of 0.5 micrometers. A method for easily characterizing milling tool run out has been adapted so tool change out can be more routine. The milling process leaves some absorber burrs and the absorber is apparently tapered at the machined wall which introduce process biases, both of which add to exposure degradation. Nevertheless, based on work to date, it appears both of these effects can be reduced to acceptable limits. Received: 25 August 1997/Accepted: 3 September 1997     

New energy transfer dyes for DNA sequencing

We have synthesized a set of four energy transfer dyes and demonstrated their use in automated DNA sequencing. The donor dyes are the 5- or 6-carboxy isomers of 4'-aminomethylfluorescein and the acceptor dyes are a novel set of four 4,7-dichloro-substituted rhodamine dyes which have narrower emission spectra than the standard, unsubstituted rhodamines. A rigid amino acid linker, 4-aminomethylbenzoic acid, was used to separate the dyes. The brightness of each dye in an automated sequencing instrument equipped with a dual line argon ion laser (488 and 514 nm excitation) was 2-2.5 times greater than the standard dye-primers with a 2 times reduction in multicomponent noise. The overall improvement in signal-to-noise was 4- to 5-fold. The utility of the new dye set was demonstrated by sequencing of a BAC DNA with an 80 kb insert. Measurement of the extinction coefficients and the relative quantum yields of the dichlororhodamine components of the energy transfer dyes showed their values were reduced by 20-25% compared with the dichlororhodamine dyes alone.     

Microstructure and fracture behaviour of short and long fibre-reinforced polypropylene composites

Microstructure and fracture mechanical behaviour of injection-moulded, longer glass fibrereinforced polypropylene (Verton* aspect ratio 320) were studied as a function of fibre volume fraction and compared to that of shorter fibre-filled polypropylene (aspect ratio 70). Toughness was measured using instrumented notched lzod and falling weight impact tests, as well as compact tension specimens. It was found that the addition of longer fibres generally increased the toughness of the material, although more significant increases were seen in the impact tests than were seen in the compact tension test. For the latter results, a correlation between toughness improvement and microstructural details was performed on the basis of the microstructural efficiency concept, a semi-empirical approach of the formK _c,C = (a* +nR)K _c,M, where,K _c,C andK _c,M are the fracture toughnesses of the composite and the matrix, respectively,_a* is a matrix stress correction factor,n is a scaling parameter andR is a fibre reinforcement effectiveness factor. The latter corrects for differences in the composite microstructures, and incorporates effective fibre orientation factors, layering of injection moulded parts, and fibre volumes in the different layers.Nomenclature a crack length - a ^* matrix toughness correction factor - A cross-sectional area - B thickness of the sample plaques - C thickness of the composite core regions - E _peak energy adsorbed up to the maximum force in the impact load-displacement curve - E _t tensile modulus - F _max maximum force in impact force-displacement curves - f _p fibre orientation factor - f _pe effective orientation factor - f _pe,C effective orientation parameter, core region - f _{pe, s} effective orientation parameter, surface region - F critical load in the tensile test load-displacement curves - K _c critical stress intensity factor/fracture toughness - K _L fracture toughness of the composite materials - K _d dynamic fracture toughness - K _L fracture toughness of the matrix - L test with crack parallel to the mould filling direction - M microstructural efficiency factor - n scaling parameter for reinforcement effectiveness factor (energy absorbtion ratio) - R reinforcement effectiveness factor - S thickness of the composite surface regions - T test with crack perpendicular to the mould filling direction - V _f fibre volume fraction - V _m matrix volume fraction (= 1 —V _f) - W specimen width - W _f fibre weight fraction - W _m matrix weight fraction (= 1 —W _f) - X _n number average fibre length - X _v volume average fibre length - Y(a/ W) polynomial correction for compact tension specimens - variable in effective orientation factor formula - variable in effective orientation factor formula - _B strain to break - _c density of the composite - _f fibre density - _m matrix density - _F fracture strength - fibre angle with respect to a reference direction     

Finite canonical rewriting systems for congruences generated by concurrency relations

WhenC is a concurrency relation on alphabet , then ^*/= _C is a free partially commutative monoid. Here we show that it is decidable in polynomial time whether or not there exists a finite canonical rewriting systemR on such that the congruences _R ^* generated byR and = _C induced byC coincide. Further, in case such a systemR exists, one such system can be determined in polynomial time.     

On Modulus and Fracture Toughness of Rigid Particulate Filled High Density Polyethylene

A Kaolin-filled, high-density polyethylene (HDPE) system was used to illustrate the influence of particulates on modulus and toughness of the bulk material. A variation of filler content, particulate size and coupling quality for two HDPE-matrix systems with different viscosity led to a strong dependency of elastic modulus and fracture toughness under various testing conditions, e.g. static loading, fatigue and impact.

A stiffness improvement with increasing filler content was achieved by all coupling qualities. The developed Kaolin reinforcement of HDPE with optimised coupling offers an improvement of the stiffness and toughness under all investigated loading conditions. The degree of improvement depends on the particulate size and matrix viscosity. The energy dissipation mechanisms were investigated by fractographic analysis.     

Effect of moisture and particle size on the extractability of oils from seeds with supercritical CO2

Moisture level and particle size of soybeans, peanuts and cottonseed were correlated with the extraction rate and yield of oil when extracted with supercritical carbon dioxide (SC-CO₂) at a constant temperature (50 C) and pressure (8000 psig). The rate of extraction and ultimate oil yields were quite low with cracked soybeans. However, good extraction rates and nearly theoretical oil yields were obtained from ground or thinly flaked (<0.010″) seeds. Moisture levels between 3% and 12% had little effect on extracability. Oil composition was not influenced by either parameter. Scanning electron microscopy was used to study seed structure before and after extraction with SC-CO₂. Micrographs of SC-CO₂-extracted seeds were similar to hexane-extracted seeds. Presented at the AOCS Meeting, May 1983, Chicago.