High-temperature liquid chromatography coupled on-line to a continuous-flow biochemical screening assay with electrospray ionization mass spectrometric detection

The potential of high-temperature liquid chromatography (HTLC) was investigated in an on-line combination with a screening system for bioactive compounds against the enzyme cathepsin B. Samples were separated by HTLC and subsequently analyzed by an on-line continuous-flow enzymatic assay. Detection was performed by electrospray ionization mass spectrometry, revealing both the bioactivity and the molecular mass of the bioactive compounds. Compared to conventional reversed-phase liquid chromatography, the amount of methanol necessary for separation could be decreased to only 10%, which improved the compatibility of LC with a biochemical assay. Sufficient preheating of the mobile phase prior to the separation and postcolumn cooling to prevent deactivation of the enzyme, even at column temperatures as high as 208 degrees C, was achieved as indicated by the reliable peak shapes obtained. The sensitivity was comparable with previously described systems operating at ambient temperatures as similar IC50 values were obtained. Exposing the inhibitors to high temperatures did not lead to thermal decomposition. The separation of inhibitors and the subsequent biochemical assay was performed either isothermally at various temperatures or by applying various temperature gradients as well as at various flow rates. The results obtained clearly show the compatibility of HTLC with an enzymatic screening assay.     

A system to test the ground surface conditions of construction sites--for safe and efficient work without physical strain

Ground surface conditions on construction sites have an important influence on the health and safety of workers and their productivity. The development of an expert-based "working conditions evaluation" system is described, intended to assist site managers in recognising unsatisfactory ground conditions and remedying these. The system was evaluated in the period 2002-2003. The evaluation shows that companies recognize poor soil/ground conditions as problematic, but are not aware of the specific physical workload hazards. The developed methods allow assessment of the ground surface quality and selection of appropriate measures for improvement. However, barriers exist at present to wide implementation of the system across the industry. Most significant of these is that responsibility for a site's condition is not clearly located within contracting arrangements, nor is it a topic of serious negotiation.     

Costs of mastitis: facts and perception

A model to calculate the economic losses of mastitis on an average Dutch dairy farm was developed and used as base for a tool for farmers and advisors to calculate farm-specific economic losses of mastitis. The economic losses of a clinical case in a default situation were calculated as euro210, varying from euro164 to euro235 depending on the month of lactation. The total economic losses of mastitis (subclinical and clinical) per cow present in a default situation varied between euro65 and euro182/cow per year depending on the bulk tank somatic cell count. The tool was used to measure perception of the total economic losses of mastitis on the farm and the farmers' assessment of the cost factors of mastitis on 78 dairy farms, of which 64 were used for further analyses. Most farmers (72%) expected their economic losses to be lower than those revealed by our calculation made with their farm information. Underestimating the economic losses of mastitis can be regarded as a general problem in the dairy sector. The average economic losses assessed by the farmers were euro78/cow per year, but a large variation was given, euro17-198/cow per year. Although the average assessment of the farmers of the different cost factors is close to the default value, there is much variation. To improve the adoption rate of advice and lower the incidence of mastitis, it is important to show the farmers the economic losses of mastitis on their farm. The tool described in this paper can play a role in that process.     

Supramolecular Antifouling Additives for Robust and Efficient Functionalization of Elastomeric Materials: Molecular Design Matters

The ultimate functionality of elastomeric materials can be largely influenced by the molecular design of antifouling additives that interact through directed hydrogen bonding bisurea motifs. Herein, three additives, composed of matching bisurea groups and antifouling oligo(ethylene glycol) (OEG) functionalities, are judiciously designed. The first additive is composed of one bisurea and one OEG, the second additive of one bisurea and two OEGs, and the third additive of two bisurea and one OEG. On solution‐cast films, non‐cell adhesive properties are dependent on the amount of incorporated OEG irrespective of the bisurea design; however, on 3D electrospun scaffolds only the additive that consists of two bisurea moieties connected via an OEG functionality ensures proper non‐cell adhesive properties. Interestingly, robust non‐cell adhesive properties are maintained, both with repeated cell seeding and after partial enzymatic degradation of the scaffold. These results highlight the importance of additive design in supramolecular functionalization and show that translation from simple 2D solution‐cast films to 3D electrospun scaffolds is not trivial with respect to additive presentation and functionality.     

Artificial Channels in an Infectious Biofilm Created by Magnetic Nanoparticles Enhanced Bacterial Killing by Antibiotics

The poor penetrability of many biofilms contributes to the recalcitrance of infectious biofilms to antimicrobial treatment. Here, a new application for the use of magnetic nanoparticles in nanomedicine to create artificial channels in infectious biofilms to enhance antimicrobial penetration and bacterial killing is proposed. Staphylococcus aureus biofilms are exposed to magnetic‐iron‐oxide nanoparticles (MIONPs), while magnetically forcing MIONP movement through the biofilm. Confocal laser scanning microscopy demonstrates artificial channel digging perpendicular to the substratum surface. Artificial channel digging significantly (4–6‐fold) enhances biofilm penetration and bacterial killing efficacy by gentamicin in two S. aureus strains with and without the ability to produce extracellular polymeric substances. Herewith, this work provides a simple, new, and easy way to enhance the eradication of infectious biofilms using MIONPs combined with clinically applied antibiotic therapies.     

A critical comparative analysis of five world university rankings

Scientometrics - To provide users insight into the value and limits of world university rankings, a comparative analysis is conducted of five ranking systems: ARWU, Leiden, THE, QS and U-Multirank....     

Do journals flipping to gold open access show an OA citation or publication advantage?

The effects of Open Access (OA) upon journal performance are investigated. The key research question holds: How does the citation impact and publication output of journals switching (“flipping”) from non-OA to Gold-OA develop after their switch to Gold-OA? A review is given of the literature, with an emphasis on studies dealing with flipping journals. Two study sets with 119 and 100 flipping journals, derived from two different OA data sources (DOAJ and OAD), are compared with two control groups, one based on a standard bibliometric criterion, and a second controlling for a journal’s national orientation. Comparing post-switch indicators with pre-switch ones in paired T-tests, evidence was obtained of an OA Citation advantage but not of an OA Publication Advantage. Shifts in the affiliation countries of publishing and citing authors are characterized in terms of countries’ income class and geographical world region. Suggestions are made for qualitative follow-up studies to obtain more insight into OA flipping or reverse-flipping.

     

The citation impact of social sciences and humanities upon patentable technology

This paper examines the citation impact of papers published in scientific-scholarly journals upon patentable technology, as reflected in examiner- or inventor-given references in granted patents. It analyses data created by SCImago Research Group, linking PATSTAT’s scientific non-patent references (SNPRs) to source documents indexed in Scopus. The frequency of patent citations to journal papers is calculated per discipline, year, institutional sector, journal subject category, and for “top” journals. PATSTAT/Scopus-based statistics are compared to those derived from Web of Science/USPTO linkage. A detailed assessment is presented of the technological impact of research publications in social sciences and humanities (SSH). Several subject fields perform well in terms of the number of citations from patents, especially Library and Information Science, Language and Linguistics, Education, and Law, but many of the most cited journals find themselves in the interface between SSH and biomedical or natural sciences. Analyses of the titles of citing patents and cited papers are presented that shed light upon the cognitive content of patent citations. It is proposed to develop more advanced indicators of citation impact of papers upon patents, and ways to combine citation counts with citation content and context analysis.

     

Room‐Temperature Cubic Phase Crystallization and High Stability of Vacuum‐Deposited Methylammonium Lead Triiodide Thin Films for High‐Efficiency Solar Cells

Methylammonium lead triiodide (MAPI) has emerged as a high‐performance photovoltaic material. Common understanding is that at room temperature, it adopts a tetragonal phase and it only converts to the perfect cubic phase around 50–60 °C. Most MAPI films are prepared using a solution‐based coating process, yet they can also be obtained by vapor‐phase deposition methods. Vapor‐phase‐processed MAPI films have significantly different characteristics than their solvent‐processed analogous, such as relatively small crystal‐grain sizes and short excited‐state lifetimes. However, solar cells based on vapor‐phase‐processed MAPI films exhibit high power‐conversion efficiencies. Surprisingly, after detailed characterization it is found that the vapor‐phase‐processed MAPI films adopt a cubic crystal structure at room temperature that is stable for weeks, even in ambient atmosphere. Furthermore, it is demonstrated that by tuning the deposition rates of both precursors during codeposition it is possible to vary the perovskite phase from cubic to tetragonal at room temperature. These findings challenge the common belief that MAPI is only stable in the tetragonal phase at room temperature.