Quantitative analysis of microbial community structure in two-phase anaerobic digesters treating food wastewater

An acidogenic reactor with a 0.5-L working volume and a methanogenic digester with a 5-L of working volume were operated for 150 days on a continuous mode to investigate the structure of a microbial community during food wastewater treatment. During the steady state of anaerobic digestion, volatile solids (VS) removal efficiency in the pilot plant was approximately 65%. The bacterial population was higher than any other methanogens detected during the entire anaerobic process and treatment of raw food wastewater. Methanomicrobiales (MMB), Methanosarcinales (MSL), and Methanobacteriales (MBT) were detected during digestion. The methanogenic population present in the acidogenic reactor was directly affected by the archaeal community in raw food wastewater. However, the shift of microbial community in the methanogenic digester was relatively gradual. The performance of methanogenic digester might be more related to the change of microbial metabolism affected by the physicochemical properties of the input substrate.     

A methodology for determining the true stress-strain curve of SA-508 low alloy steel from a tensile test with finite element analysis

The true stress-strain curve of a material should be determined for plastic property input to numerical analysis. This study proposes a simple methodology for determining the true stress-strain curve of SA-508 Grade 3 Class 1 low alloy steel using limited information from a general tensile test with finite element analysis. Measured engineering stresses and strains can be reasonably converted to true stresses and strains under uniform deformation before necking. True stress-strains are difficult to determine after necking because of nonuniform deformation without specialized measurement techniques. Five post-necking strain hardening models are considered, namely, linear, swift, Ludwick, Hollomon-linear (HL) and Hollomon-linear-constant (HLC) models. The equations for each model can be determined using the results of the tensile test, which include the true stress-strain value at the maximum load point and the corrected true stress-strain value at the fracture point plus the Considere instability criterion. The HL and HLC models suggested that the engineering stress-strains from the finite element analysis are consistent with the experimental results.     

Impacts of climate and land‐cover changes on water resources in a humid subtropical watershed: a case study from East Texas,USA

This study investigates the response of water resources regarding the climate and land‐cover changes in a humid subtropical watershed during the period 1970–2009. A 0.7°C increase in temperature and a 16.3% increase in precipitation were observed. Temperature had a lower increase trend, and precipitation showed definite increasing trend compared to previous studies. The main trend of land‐cover change was conversion of vegetation and barren lands to developed and crop lands affected by human intervention, and forest and grass to bush/shrub which considered to be caused by natural climate system. Hydrologic responses to climate and land‐cover changes resulted in increases of surface run‐off (15.0%), soil water content (2.7%), evapotranspiration (20.1%) and a decrease in groundwater discharge (9.2%). We found that surface run‐off is relatively stable with precipitation, whereas groundwater discharge and soil water content are sensitive to changes in land cover, especially land cover brought about by human intervention.     

Simvastatin Attenuates the Oxidative Stress,Endothelial Thrombogenicity and the Inducibility of Atrial Fibrillation in a Rat Model of Ischemic Heart Failure

Increased atrial oxidative stress has an important role in inducing and maintaining atrial fibrillation (AF), and the activation of the small GTPase Rac1 contributes to the oxidative stress. We investigated the relationship of Rac1, atrial endothelial thromboprotective markers and AF inducibility and if simvastatin has a potential beneficial effect on a myocardial infarction (MI)-induced heart failure (HF) rat model. Rats were randomized into three groups (shams, MI group and simvastatin treatment group) and underwent echocardiography, AF induction studies and left atrial (LA) fibrosis analysis. Atrial Rac 1, sodium calcium exchanger (I_NCX), sarcoplasmic reticulum calcium ATPase (SERCA), endothelial nitric oxide synthase (eNOS) and induced nitric oxide synthase (iNOS) were measured. AF inducibility, AF duration and LA fibrosis were significantly higher in the MI group (p < 0.001 vs. sham), which were significantly reduced by simvastatin (p < 0.05 vs. MI). The reduced expressions of atrial eNOS, SERCA, thrombomodulin, tissue factor pathway inhibitor and tissue plasminogen activator in the MI group were significantly improved by simvastatin. Furthermore, the increased expression of atrial iNOS, I_NCX and Rac1 activity were significantly decreased by the simvastatin. Oxidative stress, endothelial dysfunction and thrombogenicity are associated with the promotion of AF in a rat model of ischemic HF. These were associated with increased Rac1 activity, and simvastatin treatment prevents these changes.     

Pr3+/Er3+ Codoped Ge-As-Ga-S Glasses as Dual-Wavelength Fiber-optic Amplifiers for 1.31 and 1.55 μm Windows

Fluorescence emissions at both 1.31 and 1.55 μm communication windows were observed from Pr³⁺/Er³⁺ codoped Ge-As-Ga-S glasses with a single wavelength pumping at 986 nm. The lifetime of the Er³⁺:⁴ I _11/2 level decreased as the Pr³⁺ concentration increased, and that of the Pr³⁺:¹ G ₄ level increased as the Er³⁺ concentration increased. Energy transfer from the Er³⁺:⁴ I _11/2 level to the Pr³⁺:¹ G ₄ level was responsible for emission of the 1.31 μm fluorescence from the Pr³⁺:¹ G ₄ level. Ge-As-Ga-S glasses that have been doped with Pr³⁺ and Er³⁺ cations are promising amplifier materials for both 1.31 and 1.55 μm communication windows.     

2-D WO3 decorated with Pd for rapid gasochromic and electrical hydrogen sensing

The ultrathin two-dimensional (2D) nanomaterials display unique properties owing to their ultrahigh specific surface area and strong quantum confinement of electrons in two dimensions. In this work, we fabricated a rapid gasochromic and electrical hydrogen sensing system containing 2D WO₃ and Pd nanoparticles. 2D WO₃ nano-plates (NP) are synthesized using sol–gel method and Pd nanoparticles are coated on WO₃ by green photochemical deposition method. The sensor is fabricated by dispersing the 2D WO₃/Pd composite on filter paper. In presence of hydrogen gas, 2D WO₃/Pd composite produces visible change in color from brown to dark blue. With the fabricated sensor, as low as 0.1% H₂ gas in air at room temperature can be easily detected using electrical sensing scheme whereas for higher concentration from 1 to 100%, eye readable gasochromic scheme can be utilized. The use of 2D WO₃ decreased the response time in great deal compared to WO₃ nanoparticles indicating the advantage of 2D structure in fabricating rapid response H₂ sensors. The proposed method is simple and can be easily employed to large scale fabrication system for commercial applications.     

Optical band gap modulation by Mg-doping in In2O3(ZnO)3 ceramics

In this study, different amounts of Mg were doped in In₂O₃(Zn_1−xMg_xO)₃ and their thin films were grown by using the RF magnetron sputtering method. The optical and electrical characteristics of the films revealed that the lattice constant decreased while the optical band gap increased as the Mg content increased, showing an inverse proportional relationship with each other. Therefore, it was found that Mg doping in indium zinc oxide (IZO) is also effective for band gap modulation as it was reported in a Mg-doped ZnO system. When IZO thin films were grown in a more reducing ambient, the carrier concentration increased which resulted in the increase of band gap energy. This was explained due to the Burstein–Moss effect.     

A rapid method for the simultaneous determination of 25 anti-hypertensive compounds in dietary supplements using ultra-high-pressure liquid chromatography

A novel, stable, simple and specific ultra-performance liquid chromatography method with ultraviolet detection (205 nm) for the simultaneous analysis of 25 anti-hypertensive substances was developed. The method was validated according to the International Conference of Harmonisation guidelines with respect to linearity, accuracy, precision, limit of detection (LOD), limit of quantitation (LOQ) and stability. From the ultra-performance liquid chromatography results, we identified the LOD and LOQ of solid samples to be 0.20–1.00 and 0.60–3.00 μg ml^?1, respectively, while those of liquid samples were 0.30–1.20 and 0.90–3.60 μg ml^?1, respectively. The linearity exceeded 0.9999, and the intra- and inter-day precisions were 0.15–6.48% and 0.28–8.67%, respectively. The intra- and inter-day accuracies were 82.25–111.42% and 80.70–115.64%, respectively, and the stability was lower than 12.9% (relative standard deviation). This method was applied to the monitoring of 97 commercially available dietary supplements obtained in Korea, such as pills, soft capsules, hard capsules, liquids, powders and tablets. The proposed method is accurate, precise and of high quality, and can be used for the routine, reproducible analysis and control of 25 anti-hypertensive substances in various dietary supplements. The work presented herein may help to prevent incidents related to food adulteration and restrict the illegal food market.     

Miniaturized Flexible Electronic Systems with Wireless Power and Near‐Field Communication Capabilities

A class of thin, lightweight, flexible, near‐field communication (NFC) devices with ultraminiaturized format is introduced, and systematic investigations of the mechanics, radio frequency characteristics, and materials aspects associated with their optimized construction are presented. These systems allow advantages in mechanical strength, placement versatility, and minimized interfacial stresses compared to other NFC technologies and wearable electronics. Detailed experimental studies and theoretical modeling of the mechanical and electromagnetic properties of these systems establish understanding of the key design considerations. These concepts can apply to many other types of wireless communication systems including biosensors and electronic implants.