Reliability of physiological and subjective responses to physical and psychosocial exposures during a simulated manufacturing task

Responses to physical and psychosocial exposures can be measured using diverse methods, but their reliability, particularly under multiple exposures, is largely unknown. Five classes of methods were used to assess physiological and subjective responses among 24 participants to four combinations of physical and psychosocial exposures while performing two identical sessions of a simulated overhead manufacturing task. As an exploratory analysis, test–retest reliability was quantified using intraclass correlation coefficients (ICC) and coefficients of variation (CV). Discomfort ratings were reliable under less favorable exposures, and ratings of the psychosocial environment were most reliable under favorable social support. Workload ratings were most reliable with high physical exposure and favorable social support, and task performance was reliable overall. EMG and heart rate had relatively low reliability. Slightly less than half of the variables were considered reliable, but reliability depended on exposure conditions.Relevance to industry: The study provides information on the reliability of commonly used exposure measurement methods. The results can guide the selection of physiological and psychological work outcome measurements in future studies and work evaluations.     

Ergonomic evaluation of hospital bed design features during patient handling tasks

Patient handling tasks (e.g., transportation and repositioning) are important causes of musculoskeletal disorders among healthcare workers. The purpose of this study was to evaluate, during two patient handling tasks, the physical demands resulting from alternative hospital bed design features. Twenty-four novice participants were involved in two laboratory-based studies. The effects of a steering lock and adjustable push height were evaluated during a patient transportation task using perceptual responses and measures of performance and physical demands, and the effect of a bed contour feature was determined based on patient sliding distance during repeated bed raising/lowering. Use of the steering lock reduced the number of adjustments during bed maneuvering by 28% and decreased ratings of physical demands. Use of the adjustable push height reduced shoulder moments by 30%. With the contour feature, patient sliding distance was reduced by ∼40% over 12 raise/lower cycles. These results suggest that the steering lock and adjustable push height features can reduce physical demands placed on healthcare workers during patient transportation tasks. Although patient sliding distance was reduced using the contour feature, assessing direct effects of this feature on physical demands (e.g., reduced need for workers to reposition patients) will require further investigation.

Relevance to industry

Hospital bed design features have the potential to reduce physical demands required of healthcare workers, yet there have been only limited empirical studies of these. Findings of the two current studies suggest that proactive ergonomic considerations in hospital bed design can reduce these physical demands.     

The impact of operating heavy equipment vehicles on lower back disorders

Literature reviews examining the relationship between heavy equipment vehicle (HEV) operation and the development of musculoskeletal disorders have generally been qualitative in nature and have not employed an evidence-based assessment procedure. This research determines the extent to which whole-body vibration/shock and working postures are associated with lower back and neck disorders among HEV operators, while accounting for individual (i.e. age, gender, prior history of back or neck disorders) and occupational (i.e. material handling, climatic conditions, psychosocial factors) confounders. Published articles were obtained from a search of electronic databases and from bibliographies in the identified articles. A critical appraisal of these articles was conducted using an epidemiological appraisal instrument (Genaidy et al. 2007). The meta-analysis was conducted using statistical techniques employing fixed-effect and random-effect models. Eighteen articles reporting observational studies satisfied the inclusion criteria adopted for this research. The methodological qualities of the published studies ranged from marginal to average. The meta-relative risk was found to be 2.21, indicating that operators exposed to driving HEVs are at more than twice the risk of developing lower back pain in comparison to those not exposed to driving HEVs. Therefore, it seems possible that there is a causal relationship between working as a HEV operator and development of lower back disorders. Prospective cohort studies are urgently needed to confirm the outcomes of this evidence-based methodology (based in part on the meta-analysis) and the biological plausibility should be further explored. The reported findings point to a need for improved ergonomic design of HEVs.     

Electromyographic evaluation of a bed assistive device for abdominal surgery patients in postoperative care

OBJECTIVE: Muscle activity with and without the use of commercially available patient assistive devices during bed rising and lowering was quantified. BACKGROUND: Limited research is available in understanding or evaluating the physical benefits of assistive devices for patient use following major abdominal surgery. METHODS: Twenty healthy participants (9 men, 11 women) took part in a laboratory study to test the effects of device configuration (five levels) and bed elevation angle (0 degree and 30 degrees) on mean and peak upper and lower rectus abdominis and external oblique concentric and eccentric muscle activity. RESULTS: Reduced muscle activity was associated with the use of an assistive device, as compared with manual bed rising (unassisted). Positioning the devices at a higher anchor height and/or increasing the bed elevation angle further reduced muscle activity. Objective and subjective differences between the two assistive devices evaluated in the study were found. CONCLUSION: These results suggest that self-assistive devices may speed recovery because of reduced loads on damaged tissues. APPLICATION: Potential applications of this research include the assessment of other commercially available lift aids or comparisons of self-assistive lift aids with hospital-housed lift aids used to speed recovery rates.     

The influence of age on isometric endurance and fatigue is muscle dependent: a study of shoulder abduction and torso extension

The present study examined differences in isometric muscle capacity between older (55-65 years) and younger (18 - 25 years) individuals. A total of 24 younger and 24 older participants (gender balanced within each group) performed sustained shoulder abductions and torso extensions to exhaustion at 30%, 50% and 70% of individual maximal voluntary contraction (MVC). Along with endurance time, manifestations of localized fatigue were determined based on changes in surface electromyographic signals obtained from the shoulder (middle deltoid) and the torso (multifidus and longissimus thoracis) muscles. Strength recovery was monitored using post-fatigue MVCs over a 15-min period. Compared to the younger group, older individuals exhibited lower muscular strength, longer endurance time and slower development of local fatigue. Age effects on fatigue were typically moderated by effort level, while effects of gender appeared to be marginal. Non-linear relationships between target joint torque and endurance time were observed, with effects of age differing between shoulder abduction and torso extension. Overall, the effects of age on endurance and fatigue were more substantial and more consistent for the shoulder muscle than for the torso muscles and were likely related to differences in muscle fibre type composition. For strength recovery rates, no significant age or gender effects were found in either experiment. In summary, this study suggests that differences in isometric work capacity do exist between older and younger individuals, but that this effect is influenced by effort level and the muscle tested.     

Disturbance and recovery of trunk mechanical and neuromuscular behaviours following prolonged trunk flexion: influences of duration and external load on creep-induced effects

Trunk flexion results in adverse mechanical effects on the spine and is associated with a higher incidence of low back pain. To examine the effects of creep deformation on trunk behaviours, participants were exposed to full trunk flexion in several combinations of exposure duration and external load. Trunk mechanical and neuromuscular behaviours were obtained pre- and post-exposure and during recovery using sudden perturbations. Intrinsic trunk stiffness decreased with increasing flexion duration and in the presence of the external load. Recovery of intrinsic stiffness required more time than the exposure duration and was influenced by exposure duration. Reflexive trunk responses increased immediately following exposure but recovered quickly (～2.5 min). Alterations in reflexive trunk behaviour following creep deformation exposures may not provide adequate compensation to allow for complete recovery of concurrent reductions in intrinsic stiffness, which may increase the risk of injury due to spinal instability. STATEMENT OF RELEVANCE: An increased risk of low back injury may result from flexion-induced disturbances to trunk behaviours. Such effects, however, appear to depend on the type of flexion exposure, and have implications for the design of work involving trunk flexion.     

Digital storytelling in Bhutan: A qualitative examination of new media tools used to bridge the digital divide in a rural community school

This qualitative study examines the use of digital storytelling as an instructional intervention for bridging the digital divide among public school students in rural Bhutan. Primary participants for the study included elementary school children who had never been previously exposed to computer technology and were recipients of a donated classroom set of laptops. Results demonstrated how technology instruction and infrastructure inherently positions ethical and cultural differences between researchers, education personnel, school children and their families. The use of English became an inadvertent gatekeeper for who was chosen to participate in the classroom laptop program. Another major finding examines how Bhutan’s social awareness for “Gross National Happiness” is inherently juxtaposed in contrast to Western perceptions of modernity and progress. Educators and administrators concerned about initial technology instruction in developing regions should find this study informative.     

A review on some classes of algebraic systems

ABSTRACT

In this paper, we review some algebraic control system. Precisely, linear and bilinear systems on Euclidean spaces and invariant and linear systems on Lie groups. The fourth classes of systems have a common issue: to any class, there exists an associated subgroup. From this object, we survey the controllability property. Especially, from those coming from our contribution to the theory.     

A Stimulation Method to Assess the Contractile Status of the Lumbar Extensors in a Seated Posture

The purpose of present study was to develop and evaluate methods to assess stimulation responses of the lumbar extensors, as part of a longer‐term goal of detecting fatigue during prolonged sitting. Three stimulation frequencies (2, 5, and 8 Hz) were tested in separate stages, which include 3 stimulation trains and 4 sampling blocks. Repeated measures analyses of variance were used to determine whether any significant differences in mean stimulation responses occurred with respect to stimulation frequency, sampling block, and stimulation train. Reliability of measured stimulation responses was assessed within and between sampling blocks using intraclass correlation coefficients. Stimulation frequencies significantly affected the stimulation responses and time‐to‐potentiation differed between the 3 stimulation frequencies; it was highest for 2 Hz stimulation. All 3 stimulation frequencies resulted in excellent reliability within and between sampling blocks. Use of the current protocol at 2 Hz is recommended as appropriate to measure the lumbar extensors status during prolonged sitting.