Elevation of plasma levels of L-dopa in transdermal administration of L-dopa-butylester in rats

To increase delivery of L-dopa in its transdermal absorption, a new lipophilic derivative of L-dopa, L-dopa-butylester, was synthesized. An in-vitro study employing two-chamber diffusion cells, in which the excised rat abdominal skin was mounted, revealed that, in the presence of L-menthol and ethanol, L-dopa-butylester penetrated in its original form more effectively than L-dopa. L-Dopa-butylester sheets were made by immersing wiper sheets in methanol containing the compound, and then evaporating the methanol. An extraction study of the compound from the sheets revealed that its stability was maintained for at least 12 weeks. In an in-vivo cutaneous absorption study, an L-dopa-butylester sheet was attached to the shaved rat abdominal skin. A hydrogel containing L-menthol and ethanol was spread on vinyl tape, and this sheet was placed over it. In plasma, the L-dopa level rose linearly between 30 and 180 min after the cutaneous application; L-dopa-butylester was not detected. The L-dopa level was higher than that in which L-dopa was applied. These findings indicated that the lipophilic nature of L-dopa-butylester further increased its penetration through the skin, and that L-dopa-butylester that was taken up into the general circulation system was rapidly converted to L-dopa by hydrolysis in the body.     

Composition dependence of young’s modulus in Ti-V, Ti-Nb, and Ti-V-Sn alloys

The Young’s modulus of Ti-V and Ti-V-Sn alloys quenched from the β-phase region after solution treatment and cold rolling was investigated in relation to alloy compositions, microstructures, and constituent phases. The composition dependence of the Young’s modulus for quenched Ti-V binary alloys shows two minima of 69 GPa at Ti-10 mass pct V and 72 GPa at Ti-26 mass pct V. Between the two compositions, athermalω or stress-induced ω is introduced in retainedβ phase and increases Young’s modulus. That is, a low Young’s modulus is attained unless alloys undergoω transformation. In Ti-5 and -8 mass pct V, which under goα′ (hcp) martensitic transformation on quenching, the Young’s modulus further decreases by cold rolling, which can be reasonably explained by the formation ofα′ rolling texture. Comparing Young’s modulus in Ti-V binary alloy with that in Ti-Nb binary alloy, it is found that Young’s modulus is remarkably increased by athermal- or stress inducedω phase, and it shows a minimum when both martensitic andω transformation are suppressed during quenching in metastableβ alloys. The Sn addition to Ti-V binary alloy retards or suppresses athermal and stress-inducedω transformation, thereby decreasing Young’s modulus. Young’s modulus exhibits minimum values of 51 GPa in quenched (Ti-12 pct V)-2 pct Sn and of 57 GPa in cold-rolled (Ti-12 pct V)-6 pct Sn.     

The advanced set-up and control system for Dofasco's tandem coldmill

The new coupled pickle line and cold mill (CPCM) has been processing steel since December 1991 at Dofasco Inc. in Hamilton, Ontario, Canada. This mill rolls both sheet and tin plate. The work rolls for the last stand are often textured by grit blasting to roll “matte” finished strip. A new computer-targeted control system was developed for the roll speeds and gaps, specifically for matte rolling. The new set-up system uses Stone's model, which is more appropriate for the limited reductions evident with the rougher rolls. Conventional automatic gauge control (AGC) systems using thickness measurements after the last stand are limited in performance by the effect of long transport delays. These limitations are particularly critical during mill acceleration and deceleration. The use of a thickness gauge before the stand with matte rolls allows the development of AGC systems using shorter control loops for final gauge control. The AGC system uses a Smith predictor for transport lag, (phase shift), and compensation. The combination of the shorter AGC loop and the Smith predictor allows higher gains to be used in the control system. This set-up and control system has contributed to Dofasco's position as a market leader in thickness performance     

Benign fibroosseous lesions involving the skull base, paranasal sinuses, and nasal cavity. Report of two cases

We report a case of a basilar artery migraine in a 17-year-old boy with transient CT and MR abnormalities after each of two migraine episodes. A repeat MR study 6 months after the last event showed complete resolution of the lesion. Transient abnormalities on brain images similar to those shown in our case have been reported in patients with migraine and other neurologic conditions and are most likely related to cerebral vasogenic edema.     

Endotoxin and cytokines increase hepatic sphingolipid biosynthesis and produce lipoproteins enriched in ceramides and sphingomyelin

Alterations in triglyceride and cholesterol metabolism often accompany inflammatory diseases and infections. We studied the effects of endotoxin (lipopolysaccharide [LPS]) and cytokines on hepatic sphingolipid synthesis, activity of serine palmitoyltransferase (SPT), the first and rate-limiting enzyme in sphingolipid synthesis, and lipoprotein sphingolipid content in Syrian hamsters. Administration of LPS induced a 2-fold increase in hepatic SPT activity. The increase in activity first occurred at 16 hours, peaked at 24 hours, and was sustained for at least 48 hours. Low doses of LPS produced maximal increases in SPT activity, with half-maximal effect seen at approximately 0.3 microg LPS/100 g body weight. LPS increased hepatic SPT mRNA levels 2-fold, suggesting that the increase in SPT activity was due to an increase in SPT mRNA. LPS treatment also produced 75% and 2.5-fold increases in hepatic sphingomyelin and ceramide synthesis, respectively. Many of the metabolic effects of LPS are mediated by cytokines. Interleukin 1 (IL-1), but not tumor necrosis factor, increased both SPT activity and mRNA levels in the liver of intact animals, whereas both IL-1 and tumor necrosis factor increased SPT mRNA levels in HepG2 cells. IL- produced a 3-fold increase in SPT mRNA in HepG2 cells, and the half-maximal dose was 2 ng/mL. IL-1 also increased the secretion of sphingolipids into the medium. Analysis of serum lipoprotein fractions demonstrated that very low density lipoprotein, intermediate density lipoprotein, and low density lipoprotein isolated from animals treated with LPS contained significantly higher amounts of ceramide, glucosylceramide, and sphingomyelin. Taken together, these results indicate that LPS and cytokines stimulate hepatic sphingolipid synthesis, which results in an altered structure of circulating lipoproteins and may promote atherogenesis.     

Reversible crosslinking in cellulose. I. Determination of mercaptan and disulfide in modified cotton

Mercaptan and disulfide contents of modified cotton fabrics could be determined by application of Leach's polarographic method for wool, with minor modification. It was found that mercaptocellulose prepared by the reaction of tosyl cellulose and potassium thiolacetate followed by alkaline hydrolysis contained considerable amounts of disulfided in addition to mercaptain. Iodometric titration of mercaptocellulose gave a higher value of mercaptan than that obtained by the polarographic method. The mercaptan and disulfide contents and methylene blue uptake of the iodine-treated samples indicate that some of the mercaptan groups further undergo oxidation to acidic groups as a result of the iodine treatment. The spatial effect in the oxidation of mercapto groups in modified cotton is briefly discussed.     

Nanoliter-sized liquid dispenser array for multiple biochemical analysis in microfluidic devices

We have developed a microdispenser array made of PDMS, in which a number of nanoliter-sized droplets can be accurately dispensed and mixed with the aid of specific channels under pneumatic pressure. In this system, hydrophobic and narrow channels act as a kind of valve and help structural liquid manipulation. Also, by arranging multiple dispensers in parallel, a single injection of liquid becomes sufficient for the preparation of multiple nanoliter-sized aliquots for different reactions. We designed two kinds of microdevices for multiple liquid dispensing and mixing and evaluated their performance and reproducibility, proving them sufficient for quantitative reactions. As a practical application, biochemical analysis of glucose was performed using enzymatic reactions. This liquid dispensing technology can be widely applied in the field of microscale analysis due to its low consumption, small dead volume of reagents and samples, and ease of operation.     

Phase relations and thermodynamic properties of the uranium-nitrogen system

The present state of knowledge of the phase relations and thermodynamic properties of the uranium-nitrogen system is given. Emphasis is placed on the nonstoichiometric and thermodynamic properties of uranium sesquinitride. The present paper consists of two parts. The first part is on the phase relations; an equilibrium phase diagram is proposed, and the relationship between structure and lattice parameter for the α-U₂N₃-UN₂ system is shown. The second part deals with thermodynamic properties of UN and α-U₂N₃; the data on decomposition pressures, specific heats, and heats and free energies of formation are summarized and evaluated.     

Activated carbon adsorption of trichloroethylene (TCE) vapor stripped from TCE-contaminated water

Ground water contaminated with trichloroethylene (TCE) used in electronic, electric, dry cleaning and the like industries is often treated by air-stripping. In this treatment process, TCE in its vapor form is stripped from ground water by air stream and sometimes emitted into the atmosphere without any additional treatments. Activated carbon adsorption is one of the practical and useful processes for recovering the TCE vapor from the exhaust air stream. However, adsorption of the TCE vapor from the stripping air stream onto activated carbons is not so simple as that from dry air, since in the exhaust air stream the TCE vapor coexists with water vapor with relatively high concentrations. The understanding of the adsorption characteristics of the TCE vapor to be adsorbed on activated carbon in the water vapor-coexisting system is essential for successfully designing and operating the TCE recovery process. In this work, the adsorption equilibrium relations of the TCE vapor adsorption on activated carbons were elucidated as a function of various relative humidity. Activated carbon fibers (ACFs) were used as model activated carbon. The adsorption equilibrium relations were studied by the column adsorption method. The adsorption isotherms of TCE vapor adsorbed on sample ACFs were successfully correlated by the Dubinin-Radushkevich equation for both cases with and without coexistent water vapor. No effects of coexistent water vapor were found on the limiting adsorption volume. However, the adsorption characteristic energy was significantly reduced by the coexistence of water vapor and its reduction was successfully correlated with the equilibrium amount of water vapor adsorbed under the dynamic condition.     

The relationship between electropermeabilization and cell cycle and cell size of Saccharomyces cerevisiae

Yeast cells (Sacchromyces cerevisiae) in 0.9% NaCl solution containing phloxine B (dye) were treated by an application of a rectangular electric pulse. We input microscopic images of the yeast suspensions after the application into a computer, and measured whether each cell dyes or not, the phase in the cell cycle, and each cell size, using the software we had developed. After those measurements, we discussed the relationship between the yield of electropermeabilization (the ratio of dyed cells to the total cell number) and the phase in the cell cycle, and cell size. From the results, it was found that the yeast cells from S-phase to M-phase (S-M phase) in the cell cycle tend to be more permeated than G1-phase yeast cells, and in both phases the yield decreases with the increase in cell size.