An analysis of a waveguide T junction with an inductive post

The authors analyze the T junction with an inductive post, taking its diameter into account for the case where the current distribution is assumed on the surface of the post. A single cylindrical post placed in a T junction improves the impedance matching and compensates the junction discontinuity in a wide frequency band. The effects of the design parameters, such as the diameter of the post and its location, are clarified. The measured return loss is accurately predicted. On the basis of this analysis, an effective design procedure for the T junction is proposed, and the reflection below -30 dB is realized over 4% bandwidth     

A cavity-backed rectangular aperture antenna with application to a tilted fan beam array antenna

A rectangular aperture of A/sub x//spl times/A/sub y/, cut in the top conducting plate of a triplate transmission line and backed by a cavity, radiates a tilted beam off the direction normal to the aperture. The mechanism of the radiation is explained using the Poynting vector distribution above the aperture and the phase distribution of the electric field over the aperture. The tilt angle is calculated as a function of side length A/sub x/ for a representative value of A/sub y/=18 mm=0.747/spl lambda//sub 12.45/, where /spl lambda//sub 12.45/ is the wavelength at a test frequency of 12.45 GHz. A tilted beam of approximately 27/spl deg/ is realized at A/sub x//A/sub y/=8/9 with a gain of approximately 8 dB. Using this value of A/sub x//A/sub y/, an array antenna composed of rectangular cavity-backed aperture elements is investigated. The array forms a tilted fan beam without phase shifters. The frequency responses of the gain and input impedance are discussed.     

Representing dimensions, tolerances, and features in MCAE systems

A method is presented for explicitly representing dimensions, tolerances, and geometric features in solid models. The method combines CSG and boundary representations in a graph structure called an object graph. Dimensions are represented by a relative position operator. The method can automatically translate changes in dimensional values into corresponding changes in geometry and topology. The representation provides an important foundation for higher-level application programs to automate tolerance analysis and synthesis. The implementation of a prototype interactive polyhedral modeler based on this representation is presented     

Minimum alveolar anesthetic concentrations for airway occlusion in cats: a new concept of minimum alveolar anesthetic concentration-airway occlusion response

The role of ergosterol in yeast stress tolerance, together with heat shock proteins (hsps) and trehalose, was examined in a sterol auxotrophic mutant of Saccharomyces cerevisiae. Ergosterol levels paralleled viability data, with cells containing higher levels of the sterol exhibiting greater tolerances to heat and ethanol. Although the mutant synthesised hsps and accumulated trehalose upon heat shock to the same levels as the wild-type cells, these parameters did not relate to stress tolerance. These results indicate that the role of ergosterol in stress tolerance is independent of hsps or trehalose.     

A D&T roundtable: challenges for low-power and high-performancechips

Microprocessor and other lC performance continues to improve at historic rates, with no visible end in sight for the next 10 years. However, we are starting to encounter a power wall. This is true for high-performance components as well as for low-power chips with a very limited energy budget offered by batteries. We need to find ways to manage power and energy consumption on all fronts-technology, design, and architecture-without compromising performance. Otherwise, we may face discontinuation of Moore's law for the semiconductor industry in the near future. This would be triggered not by any difficulty in the scaling of process technology but by formidable barriers posed by packaging and cooling, inefficacy of power delivery, and energy constraints dictated by battery technology, which is advancing at a very lukewarm pace     

Preparation of spherical fine ZnO particles by the spray pyrolysis method using ultrasonic atomization techniques

An ultrasonic atomizer was used in the spray pyrolysis method to prepare fine, spherical and uniform ZnO particles. Almost spherical particles were obtained successfully which had a mean particle size of 0.15 m and had a very narrow particle size distribution. By using alcohol as the solvent, it was found that the particles do not have hollow shell layers which could usually be observed in the spray pyrolysis process by using water as the solvent. The morphology of the ZnO particles was strongly affected by the concentration of the starting solution.     

Effect of the Chiral Center Position of an Optically Active Terminal Group on the Induction of Optical Activity in Polysilanes

Summary Polysilanes with an optically active alkoxy group, i.e., (S)-(+)-2-butoxy, (R)-(-)-2-butoxy, (S)-(-)-2-methyl-1-butoxy, and (S)-(+)-3,7-dimethyl-1-octoxy, at the terminal positions, the chiral carbon centers of which were located at the α, β, and γ positions relative to the oxygen, respectively, were prepared, and the effect of the position of chiral center of the terminal optically active group on the induction of optical activity in polysilanes was investigated. The circular dichroism (CD) spectra of these polymers showed positive Cotton signals around 340 nm at temperatures below -20 °C, but the intensities were small, indicating that the optically active groups at the terminal positions have some ability, albeit small, to induce optical activity to the polysilanes. Further, the optically active (S)-(+)-2-butoxy and (R)-(-)-2-butoxy groups did not control the helical sense direction of the polymers, despite the different chiral stimuli from the 2-butoxy groups introduced to the terminal positions. To control the helical structure of polysilanes by the use of optically active terminal groups, appropriate optically active groups are required.     

Strain-induced ordering of microdomain structures in polystyrene-block-polybutadiene-block-polystyrene triblock copolymers cross-linked in the disordered state

Strain-induced ordering of microdomain structures in cross-linked polystyrene-block-polybutadiene-block-polystyrene (SBS) triblock copolymers was examined by the small-angle X-ray scattering technique. To stretch the SBS samples at elevated temperature above the glass transition temperature of polystyrene, polybutadiene blocks were chemically cross-linked in the disordered state. The initial morphology was disorder-like or bicontinuous due to incompletion of microphase separation in the presence of the chemical cross-links. When the cross-linked SBS samples were mechanically stretched at 130 °C and were further annealed for 24 h under a stretched state, the random domain structures ordered gradually and lamellar-like regularity was finally attained. It was found that the ordering proceeded more for the case of the higher strain.     

Fibrous support for immobilization of enzymes

A poly(vinyl alcohol) (PVA) fiber support incorporating various aminoacetal functional groups has been developed for immobilizing enzymes. The aminated PVA fiber seems to adsorb enzymes with electrostatic force of attraction; thus the immobilization procedure is simple. By the use of this fiber having immobilized enzymes, the reaction between enzymes and substrates is nearly independent of the size of subtstrates. This newly developed type of fiber, which is formed by a mass superfine fibers (SFF), each measuring 1 μm or less in diameter, permits much more increased surface area than the conventional enzyme immobilization supports. Our studies of the properties of the fiber for immobilization of enzymes show the following results: (1) SFF has a greater ability for the immobilization of invertase than ordinary fibers; (2) dimethyl-aminated SFF has the best performance for the immobilization of invertase. From these results, it is concluded that the dimethyl-aminated SFF is an excellent support for the immobilization of invertase.