A real-time motion estimation and compensation LSI with wide searchrange for MPEG2 video encoding

This paper presents a motion estimation and compensation large scale integration (LSI) for the MPEG2 standard. An embedded RISC processor and special hardware modules enable the LSI to achieve a sufficient ability to perform real-time operation and provide the availability to realize many kinds of block matching algorithms. Using a three-step hierarchical telescopic search algorithm, a single chip accomplishes real-time motion estimation with search ranges of ±32.5×±32.5 pixels for motion vectors. The chip was fabricated using 0.5-μm CMOS technology and has an area of 16.5×16.5 mm² and 2.0 M transistors     

A new generation of modems for power efficient radio systems

A new class of generalized intersymbol-interference and jitter-free (GIJF) modulated signals is introduced. Computer simulation and hardware experimental research results demonstrate that our proposed new generation of signals and modulators leads to significant performance improvements in non-linearly amplified broadband radio systems. For increased power efficiency, non-linear amplification is required in most commercial satellite and terrestrial microwave systems. In particular, we demonstrate that the 3 dB envelope fluctuation of currently used offset raised-cosine overlapped QPSK systems is reduced to 0-5 dB, and that the BER performance is improved by approximately 1 dB. These significant technical performance advantages are expected to lead to more economical implementations of digital transmission systems.     

Virtual path and link capacity design for ATM networks

A path and link capacity design method for asynchronous transfer mode (ATM) networks using statistical multiplexing of cells is proposed. By developing the design method, the statistical cell multiplexing effect can be exploited to significantly reduce required network resources. The necessary design procedures are identified. A simple and effective policing mechanism is proposed. An analytical method for the evaluation of cell multiplexing characteristics using declared parameters is provided. Path and link capacity design algorithms that use these techniques are proposed. The effectiveness of the proposed design procedure is confirmed by comparing analytical results to those from a computer simulation     

Application of finite-element method to H-plane waveguide discontinuities

The finite-element method has been applied to the scattering by an inhomogeneous H-plane discontinuity of arbitrary shape in a rectangular waveguide. As an example of the method, a right-angle corner bend and a waveguide-type dielectric filter are considered. Our results agree well with earlier theoretical and experimental results.     

Germanium-oxide glass optical fibre prepared by VAD method

Germanium-oxide glass optical fibre doped with antimony for transmission of the 2 to 3 ?m band has been prepared by the vapour-phase axial deposition (VAD) method. An attenuation loss of 13 dB/km at 2.05 ?m and 70 dB/km at 2.4 ?m has been achieved.     

Sedimentation study on the binding of fibrinogen or of antithrombin III with acidic polysaccharides including heparin

Summary The binding of fibrinogen with heparin and dextran sulfates, and of antithrombin III with heparin and dextran sulfate were investigated by sedimentation velocity method. From the measurement of fibrinogen-acidic polysaccharide systems, it was confirmed that heparin and low molecular weight dextran sulfate(DSC) forms soluble complexes with fibrinogen, though the amount bound of the latter was rather small compared with high molecular weight dextran sulfate(DSD). Antithrombin III was also found to be bound by heparin and DSC. The numbers of heparin molecules bound to one molecule of fibrinogen and antithrombin III were estimated to be 4.2 and 0.3, respectively.     

New type of tin support for hydroprocessing catalyst

TiN supported molybdenum sulfide catalysts showed much higher activity for cleavage of C-C bonds than oxide supported molybdenum sulfide catalysts, indicating the possibility of a new generation of supports for hydroprocessing catalysts.     

Synthesis and Characterization of a SiAION Glass

Homogeneous SiAION glasses containing up to 1 wt% nitrogen were synthesized via a pressureless method with a controlled quench rate and structurally investigated using ²⁷Al and ²⁹Si magic-angle spinning nuclear magnetic resonance (MAS NMR), Raman, and infrared (IR) spectroscopies. Minor changes occur with the incorporation of nitrogen into the aluminosilicate glass structure as evidenced by modifications to spectra of a nitrogen-free aluminosilicate glass. The ²⁷Al MAS NMR spectrum of the SiAION glass shows the existence of aluminum in 4-,5-, and 6-coordination to oxygen. The ²⁹Si MAS NMR spectra show a distribution of silicon sites in 4-coordination to oxygen. Raman and IR spectra of the SiAION glass show additional features due to incorporation of nitrogen in the structure compared with spectra of nitrogen-free aluminosilicate glasses.     

7W operation of 644 nm wavelength laser diode arrays with index-guided structure

A 7 W operation of a red semiconductor array laser is achieved at a wavelength of 644 nm with high reliability for the first time. The uniform near-field pattern has been obtained by applying index-guided structure to the broad-stripe laser.     

An Improvement Method of Matrix Converter Drives Under Input Voltage Disturbances

While the matrix converter has many advantages that include bidirectional power flow, a size reduction, a long lifetime, and sinusoidal input currents, it is vulnerable to the input voltage disturbances, because it directly exchanges the input voltage to the output voltage. The instantaneous effective power control (IEPC) method has been proposed to compensate the input voltage disturbances, in which the instantaneous effective power is kept constant by controlling input current. However, to date, no method has been proposed to maintain the stability of the system with the IEPC. The purpose of this paper is to propose a method to control the stability of the system with IEPC. First, this paper explains the IEPC theoretically. Next, a model of the system with the IEPC is developed, and stability analyses are conducted. Then, based on the results of the analyses, a stability control method for the system with the IEPC is proposed. Furthermore, the validities of the proposed method are demonstrated by simulation and experiments. Finally, a restart performance of the system after momentary power interruption is discussed. Because the IEPC does not need phase-locked-loop to detect the phase angle of the input voltage, fast restart is expected