Bisanthracene‐Based Donor–Acceptor‐type Light‐Emitting Dopants: Highly Efficient Deep‐Blue Emission in Organic Light‐Emitting Devices

Deep‐blue fluorescent compounds are particularly important in organic light‐emitting devices (OLEDs). A donor–accepotor (DA)‐type blue‐emitting compound, 1‐(10‐(4‐methoxyphenyl)anthracen‐9‐yl)‐4‐(10‐(4‐cyanophenyl)anthracen‐9‐yl)benzene ( BD3 ), is synthesized, and for comparison, a nonDA‐type compound, 1,4‐bis(10‐phenylanthracene‐9‐yl)benzene ( BD1 ) and a weak DA‐type compound, 1‐(10‐phenylanthracen‐9‐yl)‐4‐(10‐(4‐cyanophenyl)anthracen‐9‐yl)‐benzene ( BD2 ), are also synthesized. The twisted conformations of the two anthracene units in the compounds, confirmed by single crystal X‐ray analysis, effectively prevent π‐conjugation, and the compound shows deep‐blue photoluminescence (PL) with a high PL quantum efficiency, almost independent of the solvent polarity, resulting from the absence of an intramolecular charge transfer state. The DA‐type molecule BD3 in a non‐doped device exhibits a maximum external quantum efficiency (EQE) of 4.2% with a slight roll‐off, indicating good charge balance due to the DA‐type molecular design. In the doped device with 4,4′‐bis(N‐carbazolyl)‐1,1′‐biphenyl (CBP) host, the BD3 exhibits higher EQE than 10% with Commission International de L'Eclairge (CIE) coordinates of (0.15, 0.06) and a narrow full‐width at half‐maximum of 45 nm, which is close to the CIE of the high definition television standard blue.     

Nanoimprint with thin and uniform residual layer for various pattern densities

Pattern density variation is uncomfortable for nanoimprint lithography which uses a moldable material supplied as a thin film, because the variation of pattern density causes variations of residual layer thickness reflecting on the local pattern density. To solve the problem, a new type of mold “capacity-equalized mold”, which has constant averaged depth regardless of pattern density, was fabricated and the structure of the mold was inspected. UV nanoimprint was then carried out using the mold and thickness and uniformity of the residual layer were investigated. An average thickness of 33.2 nm with a standard deviation of 3.4 nm was obtained for the mold pattern layout with a pattern density of from 0.25 to 0.75. It was found that a standard deviation of 1.2 nm was achieved for pattern density variation of from 0.33 to 0.67 by excluding artifacts.     

Plasma-tolerant structure for organic light-emitting diodes with aluminum cathodes fabricated by DC magnetron sputtering: Using a Li-doped electron transport layer

We fabricate aluminum cathodes that are almost free from plasma damage by DC magnetron sputtering for organic light-emitting diodes (OLEDs). While sputtering is widely known to have numerous advantages over conventional evaporation for mass production of devices, it can cause serious damage to organic layers. In this report, we fabricate devices that are free from plasma damage by introducing a 1%-Li-doped electron transport layer (ETL). The difference of external electroluminescence quantum efficiency between OLEDs with the structure ITO/α-NPD/ETL/Al (where ITO is indium tin oxide and α-NPD is N,N′-di(1-naphthyl)-N,N′-diphenylbenzidine) with Al cathodes deposited by conventional evaporation or sputtering is 0.1%, and their driving voltage is identical. We find that the Li-doped ETL should be thicker than 40 nm. Analysis of the depth profile of the ETL by time-of-flight secondary ion mass spectrometry indicates that considerable damage from sputtering extended to a depth of approximately 30 nm, suggesting that high-energy particles penetrated about 30 nm into the ETL.     

Decision Support for DCs Location and Distribute Range Planning: Case Study in Asia-Pacific Region

A major concern is to locate manufacturing plants and/or distribution centers to serve the needs of consumers widely and rapidly with reasonably distributive cost and flexible delivery time. The purpose of this research is to help enhance a decision support for three distribution center locations with different ranges of area in order that the distributors are able to serve appropriately the retailers in twelve large cities or capitals of the nine countries in Asia-Pacific region. The researcher applies the theory of supply chain and logistics management systems with Excel, Visual Basic and Genetic Algorithms programs to find the research results. The research results revealed that the interfaces of Excel, Visual Basic, and Genetic Algorithms programs helped decision support in distribution range selection for 3 distribution center locations. Each of which had different ranges of area for distribution with a rapidly, flexibly distributed time. However, variables resulting in a decision-making should be adjusted under certain circumstances for more reliable, specific needs.     

Threshold for Millimeter-Wave (60 GHz)-Induced Ocular Injury

Journal of Infrared, Millimeter, and Terahertz Waves - Millimeter waves (MMW) absorbed by skin or cornea may induce damage by heat. We have developed a 60 GHz MMW exposure-induced eye...     

Assemblies of Functional Peptides and Their Applications in Building Blocks for Biosensors

This feature article highlights our recent applications of functional peptide nanotubes, self‐assembled from short peptides with recognition elements, as building blocks to develop sensors. Peptide nanotubes with high aspect ratios are excellent building blocks for a directed assembly into device configurations, and their combined structures with nanometric diameters and micrometric lengths enables to bridge the “nanoworld” and the “microworld”. When the peptide‐nanotube‐based biosensors, which incorporate molecular recognition units, apply alternating current probes to detect impedance signals, the peptide nanotubes behave as excellent building blocks of the transducer for the detection of target analyes such as pathogens, cells, and heavey metal ions with high specificity. In some sensor configurations, the electric signal can be amplified by coupling them with ion‐specific mineralization via molecular recognition of peptides. In general the detection limit of peptide nanotube chips sensors is very low and the dynamic range of detection can be widened by improved device designs.     

Miniature hybrid microwave ICs using a novel thin-film technology

A novel thin-film technology for miniature hybrid microwave ICs is presented. All passive components, such as resistors and capacitors, are fully integrated on ordinary alumina ceramic substrates using the thin-film technology with very high yield. The numbers of parts and wiring processes were significantly reduced. This technology was applied to the fabrication of Ku-band solid-state power amplifiers. This thin-film technology offers the following advantages: (1) a very high yield fabrication process for thin-film capacitors having excellent electrical characteristics in the gigahertz range (ε=3.6, Q=230 at 12 GHz) and reliability; (2) two kinds of thin-film resistors having different temperature coefficients of resistivity (TCRs) and a lift-off process to integrate them with thin-film capacitors; and (3) a matching method using the thin-film capacitor     

Building maps of local apparent conductivity of the epicardium with a 2-D electrophysiological model of the heart

In this paper, we address the problem of estimating the parameters of an electrophysiological model of the heart from a set of electrical recordings. The chosen model is the reaction-diffusion model on the transmembrane potential proposed by Aliev and Panfilov. For this model of the transmembrane, we estimate a local apparent two-dimensional conductivity from a measured depolarization time distribution. First, we perform an initial adjustment including the choice of initial conditions and of a set of global parameters. We then propose a local estimation by minimizing the quadratic error between the depolarization time computed by the model and the measures. As a first step we address the problem on the epicardial surface in the case of an isotropic version of the Aliev and Panfilov model. The minimization is performed using Brent method without computing the derivative of the error. The feasibility of the approach is demonstrated on synthetic electrophysiological measurements. A proof of concept is obtained on real electrophysiological measures of normal and infarcted canine hearts.     

Ocular Effects of Exposure to 40, 75, and 95 GHz Millimeter Waves

The objective of this study was to develop a model of ocular damage induced by 40, 75, and 95 GHz continuous millimeter waves (MMW), thereby allowing assessment of the clinical course of ocular damage resulting from exposure to thermal damage-inducing MMW. This study also examined the dependence of ocular damage on incident power density. Pigmented rabbit eyes were exposed to 40, 75, and 95 GHz MMW from a spot-focus-type lens antenna. Slight ocular damage was observed 10 min after MMW exposure, including reduced cornea thickness and reduced transparency. Diffuse fluorescein staining around the pupillary area indicated corneal epithelial injury. Slit-lamp examination 1 day after MMW exposure revealed a round area of opacity, accompanied by fluorescence staining, in the central pupillary zone. Corneal edema, indicative of corneal stromal damage, peaked 1 day after MMW exposure, with thickness gradually subsiding to normal. Three days after exposure, ocular conditions had almost normalized, though corneal thickness was slightly greater than that before exposure. The 50% probability of ocular damage (DD₅₀) was in the order 40?>?95?≈?75 GHz at the same incident power densities.     

A Real-coded Genetic Algorithm Applied to Optimum Design of a Low Solidity Vaned Diffuser for Diffuser Pinup

InboductionThe requirements for high efficiency and high headhave led to a widesPread use of vaned diffuser in diffeserPumP. Usually the kinetic eneny of the flow leaving theimPeller of a diffeser PUm stage is equlvalent toWtimately 20% to 40% of the total work inPu underthe tyPical operatin conditions. If an efficient diffoserpumP is to be designed, much Of thes kinehc eneTgy mustbe recovered efficienhy The vaned thser can convertboetic energy into a static pressure rise. HoweVer thecon…