Reactive blending of polyamide with polyethylene: pull-out of in situ-formed graft copolymers and its application for high-temperature materials

Reactive blending of polyamide 6 (PA) with polyethylene (PE) having reactive sites, maleic anhydride (MAH content=0.1 wt%),and glycidyl methacrylate (GMA content=3-12 wt%), was carried out at 70/30 and 65/35 (PA/PE) blend ratios. Blend morphology evolved by reactive blending was analyzed by light scattering and transmission electron microscopy. The blends were then irradiated by electron beam. The degree of crosslinking was estimated by measuring the dynamic storage modulus at a temperature above melting point of PA. It was found that surface-to-surface interparticle distance τ was significantly reduced by the micelle formation via pull-out of in situ-formed graft copolymers. The blend with shorter τ was crosslinked by electron-beam irradiation at the lower dose level. A blend having the minimum τ (∼0.2 μm) was nicely crosslinked at a low dose level same as for PE, and even for the PA matrix system.     

Studies on the biaxial stretching of polypropylene film. XI. Type II orientation during [2-2FI]-type stretching and its change by subsequent thermal contraction

In order to study the deformation mechanism of type II stretching, the change in orientation during the restretching and subsequent thermal contraction was investigated by x-ray diffraction method. When a uniaxially oriented film is restretched, the lamellae which are stacked in the stretching direction by the stretching rotate as a whole toward the restretching axis. They rotate backward nearly reversibly during the thermal contraction, unless the restretching exceeds a balancing state, where the orientation in the film plane are equal in all directions. However, when the restretching degree is so high and the film orientation exceeds the balancing state, the lamellar rotation is accompanied by a complex phenomenon. It is considered from the wide-angle and small-angle x-ray diffraction patterns that the lamellar surface becomes indented because of slippage between microfibrils composing the lamellae, and the microfibrils themselves bend at the boundary between the amorphous and crystalline regions within which the tilting of c-axis also occurs. Upon contracting of the film; these changes recover, but even in the last stage of contraction the orientation approaches the symmetrical biaxial orientation but not the uniaxial orientation from which the biaxial orientation is started. These orientation and disorientation behaviors are not affected basically by a slight change in the restretching temperature and the degree of stretching.     

Effective renaturation of reduced lysozyme by gentle removal of urea

To increase the folding yield of concentrated reduced lysozyme,we developed a renaturation method by means of dialysis fromconcentrated urea with redox agents. After lysozyme was incubatedin the reducing buffer (8 M urea solution) with oxidized glutathione,renaturation of reduced lysozyme was started by dialysis againstthe dialyzing buffer containing 8 M urea with redox agents.The urea concentration of the dialyzing bottle was graduallydiluted with dialyzing buffer without urea at a flow rate of0.1 ml/min by high pressure pump. Using this systematic dialysis,a concentration as high as 5 mg/ml of reduced lysozyme couldbe renaturated in 80% yield, while the folding yield was <5%even at a concentration of 1 mg/ml using a conventional rapiddilution method [Goldberg et al. (1991) Biochemistry, 30, 2790–2797].Therefore, it was concluded that gentle removal of urea fromdenatured proteins, dissolved in concentrated urea solution,by means of dialysis should be useful to renature denaturedproteins effectively.     

Construction of living cellular automata using the Physarum plasmodium

The plasmodium of Physarum polycephalum is a unicellular and multinuclear giant amoeba that has an amorphous cell body. To clearly observe how the plasmodium makes decisions in its motile and exploratory behaviours, we developed a new experimental system to pseudo-discretize the motility of the organism. In our experimental space that has agar surfaces arranged in a two-dimensional lattice, the continuous and omnidirectional movement of the plasmodium was limited to the stepwise one, and the direction of the locomotion was also limited to four neighbours. In such an experimental system, a cellular automata-like system was constructed using the living cell. We further analysed the exploratory behaviours of the plasmodium by duplicating the experimental results in the simulation models of cellular automata. As a result, it was revealed that the behaviours of the plasmodium are not reproduced by only local state transition rules; and for the reproduction, a kind of historical rule setting is needed.     

Laser range scanner based on self-calibration techniques using coplanarities and metric constraints

In this paper, we propose a novel method to achieve both dense 3D reconstruction of the scene and estimation of the camera intrinsic parameters by using coplanarities and other constraints (e.g., orthogonalities or parallelisms) derived from relations between planes in the scene and reflected curves of line lasers captured by a single camera. In our study, we categorize coplanarities in the scene into two types: implicit coplanarities, which can be observed as reflected curves of line lasers, and explicit coplanarities, which are, for example, observed as walls of a building. By using both types of coplanarities, we can construct simultaneous equations and can solve them up to four degrees of freedom. To upgrade the solution to the Euclidean space and estimate the camera intrinsic parameters, we can use metric constraints such as orthogonalities of the planes. Such metric constraints are given by, for example, observing the corners of rectangular boxes in the scene, or using special laser projecting device composed of two line lasers whose laser planes are configured to be perpendicular.     

Generating function of color information detection using genetic programming

This article proposes a function for color information detection using genetic programming (GP). In image-processing, object detection is one of the important processes. In cases where the object has a complex color domain, detection becomes more difficult. We generated a detection function for a complex color domain by using GP. The detection function deals with one pixel of an input image, and it obtains an output image by processing for all pixels. We aimed at a reduction in the time taken by a human to consider an image-processing system design. We applied the generation of GP to detect a target color region in actual images. The results show that the detection function has sufficient ability for these detections.     

Using formal methods to increase confidence in a home network system implementation: a case study

A home network system consists of multiple networked appliances, intended to provide more convenient and comfortable living for home users. Before being deployed, one has to guarantee the correctness, the safety, and the security of the system. Here, we present the approach chosen to validate the Java implementation of a home network system. We rely on the Java Modelling Language to formally specify and validate an abstraction of the system. This is a substantially revised version of our paper that appeared in the proceedings of the Workshop On Leveraging Applications of Formal Methods, Verification and Validation (ISoLA), Poitiers-Futuroscope, France, December 2007.     

A novel method for three-dimensional observation of the vascular networks in the whole mouse brain

A novel method for acquiring serial images suitable for three-dimensional reconstruction of vascular networks in the whole brain of mouse was developed. The brain infused with a White India ink-gelatin solution was fixed and embedded in paraffin containing Sudan Black B through xylene also containing Sudan Black B. Each sliced surface of the paraffin block was coated with liquid paraffin and its image was serially acquired. Coating with liquid paraffin extremely improved the quality of the image. The series of serial images was free of distortion and a three-dimensional image was reconstructed without the problem of the alignment and registration of adjacent images. The volume-rendered image indicated three-dimensional distribution of blood vessels in a whole brain. No ghost or shadow was observed on a volume-rendered image of the White India ink-gelatin infused brain. The z-axial resolution examined on the orthogonal sections reconstituted from serial images obtained at an interval of 5 mum showed no cross talk, indicating that the z-axial resolution was no larger than 5 mum. A proper understanding of the vascular system in a whole brain is indispensable to reveal the development of the vascular system in the brain of normal and genetically manipulated mouse and vascular alterations in pathological situation, such as stroke and neurodegenerative disease. Although simple and inexpensive, this method will provide fundamental information on the vascular system in a whole brain.     

Threshold for Millimeter-Wave (60 GHz)-Induced Ocular Injury

Journal of Infrared, Millimeter, and Terahertz Waves - Millimeter waves (MMW) absorbed by skin or cornea may induce damage by heat. We have developed a 60&nbsp;GHz MMW exposure-induced eye...