On-chip cell sorting system using laser-induced heating of a thermoreversible gelation polymer to control flow

We have developed a microfabricated fluorescence-activated cell sorter system using a thermoreversible gelation polymer (TGP) as a switching valve. The glass sorter chip has Y-shaped microchannels with one inlet and two outlets. A biological specimen containing fluorescently labeled cells is mixed with a solution containing a thermoreversible sol-gel polymer. The mixed solution is then introduced into the sorter chip through the inlet. The sol-gel transformation was locally induced by site-directed infrared laser irradiation to plug one of the outlets. The fluorescently labeled target cells were detected with sensitive fluorescence microscopy. In the absence of a fluorescence signal, the collection channel is plugged through laser irradiation of the TGP and the specimens are directed to the waste channel. Upon detection of a fluorescence signal from the target cells, the laser beam is then used to plug the waste channel, allowing the fluorescent cells to be channeled into the collection reservoir. The response time of the sol-gel transformation was 3 ms, and a flow switching time of 120 ms was achieved. Using this system, we have demonstrated the sorting of fluorescent microspheres and Escherichia coli cells expressing fluorescent proteins. These cells were found to be viable after extraction from the sorting system, indicating no damage to the cells.     

Room-temperature miscibility gap in LixFePO4

The rechargeable lithium-ion cell is an advanced energy-storage system. However, high cost, safety hazards, and chemical instability prohibit its use in large-scale applications. An alternative cathode material, LiFePO(4), solves these problems, but has a kinetic problem involving strong electron/hole localization. One reason for this is believed to be the limited carrier density in the fixed monovalent Fe(3+)PO(4)/LiFe(2+)PO(4) two-phase electrode reaction in LixFePO4. Here, we provide experimental evidence that LixFePO4, at room temperature, can be described as a mixture of the Fe(3+)/Fe(2+) mixed-valent intermediate LialphaFePO4 and Li1-betaFePO4 phases. Using powder neutron diffraction, the site occupancy numbers for lithium in each phase were refined to be alpha=0.05 and 1-beta=0.89. The corresponding solid solution ranges outside the miscibility gap (0相似文献   

Improving an immunoassay response to related polychlorinated biphenyl analytes by mixing antibodies

Immunoassays for detection of a class of closely related antigens, e.g., PCBs, have often been too specific (responding strongly to some members of the class and missing others) and no general method for adjusting the response has been described. In this paper, the difference in the response of a model immunoassay to different Kanechlors (Japanese commercial mixtures of PCBs, analogous to Aroclors in the United States) is reduced from 20- or 50-fold (depending on which antibody is used) to 3-fold when the antibodies are mixed at the proper ratio. A mathematical model based on competitive binding of two antibodies for up to four antigens has been developed and used to describe the assay performance and to predict optimum mix ratios for the antibodies used. The model (based on separate measurement of each antibody's effective Kd for each Kanechlor) provides an excellent fit to the measured mixed antibody assay response. The model is also successful in identifying cases where mixing monoclonal antibodies will not improve the response. It is thought the method described will have applicability in a variety of cases where the analytical goal is semiquantitative screening based on the total quantity of an unknown mixture of related compounds.     

The Uncertainty in SCHF‐DT Thermal Conductivity Measurements of Lotus‐Type Porous Copper

Lotus‐type porous metals with many straight pores are attractive for use as heat‐sinks because a large heat‐transfer capacity can be obtained, due to the small diameter of the pores. In order to use lotus‐type porous copper effectively as a heat sink, it is important to know the effective thermal conductivity considering the effect of pores on heat conduction in the material. Since these metals have anisotropic pores, a steady‐state comparative longitudinal heat‐flow method for measuring thermal conductivity, referring to an ASTM standard, is better than other methods. So far, the effective thermal conductivity of lotus‐type porous copper has been measured by using specimens of different thickness (the SCHF‐DT method). In this paper, the uncertainty in the effective thermal conductivity of a specimen measured using this method was evaluated by comparison between numerical analysis and current experimental data. The following conclusions were drawn: 1) The uncertainty showed good agreement with the uncertainty analysis; 2) The contribution of the thermal grease thickness was large, based on a combined standard uncertainty analysis; and, 3) The effective thermal conductivity perpendicular to the pores of lotus copper can be measured within 10% uncertainty by this method.     

Quantitative detection system for maize sample containing combined-trait genetically modified maize

Various countries have established regulations that stipulate the labeling of agricultural commodities, feed, and food products that contain or are made from genetically modified (GM) material or that contain adventitious GM material in amounts that exceed certain threshold levels. While regulations in some countries refer to GM material on a weight per weight (w/w) percentage, the currently applied detection methods do not directly measure the w/w percentage of the GM material. Depending on the particular method and the sample matrix it is applied to, the conversion of analytical results to a w/w percentage is challenging or not possible. The first rapid PCR system for GM maize detection on a single kernel basis has been developed. The equipment for the grinding of individual kernels and a silica membrane-based 96-well DNA extraction kit were both significantly revised and optimized for this particular purpose, respectively. We developed a multiplex real-time PCR method for the rapid quantification of GM DNA sequences in the obtained DNA solutions. In addition, a multiplex qualitative PCR detection method allows for the simultaneous detection of different GM maize traits in each kernel and thereby for identification of individual kernels that contain a combination of two or more GM traits. Especially for grain samples that potentially contain combined-trait GM maize kernels, the proposed methods can deliver informative results in a rapid, precise, and reliable manner.     

New Class of High-<Emphasis Type="Italic">T</Emphasis><Subscript>C</Subscript> Diluted Ferromagnetic Semiconductors Based on CaO without Transition Metal Elements

We propose new-type ferromagnetic semiconductors based on CaO and K₂S without any transition metal elements. These materials show transparent and half-metallic ferromagnetism if the deep-impurity-band width (W) induced by doping of C, N, Si, or Ge impurities, and the electron-correlation energy (U) satisfy the Stoner’s condition of highly correlated electron system (U>W). Based on our first-principles calculations, we demonstrate that these materials satisfy the Stoner’s condition, and could be new candidates for transparent and half-metallic DMSs.     

Thermodynamic properties for the quaternary system H2O + CH3OH + LiBr + ZnCl2

The thermodynamic properties (solubility, vapour pressure, density, viscosity, heat capacity and heat of mixing) of the H₂O + CH₃OH + LiBr + ZnCl₂ (9:1 H₂O:CH₃OH and 1:1 LiBr:ZnCl₂ by mass) system using H₂O + CH₃OH as the working media and LiBr + ZnCl₂ as the absorbents were measured. The solubility data were obtained in the temperature range from 270.35 to 389.55 K. The measurements of vapour pressure, density, viscosity and heat capacity were carried out at various temperatures and absorbent concentrations. The differential heat of dilution and differential heat of solution at 298.15 K were measured for solutionw with absorbent concentrations from 0 to 75.2 wt%. The integral heat of mixing data at 298.15 K were obtained from both sets of experimental data. The integral heats of mixing for this quaternary system showed exothermic behaviour. The vapour pressure data were correlated with an Antoine-type equation. An empirical formula for the heat capacity was obtained from experimental data. The experimental data for the basic thermodynamic properties of this quaternary system were compared with those of the basic H₂O + LiBr system.