High bit rate and programmable multiwavelength generator based onRaman soliton effect in DSF

A wavelength tunable multiwavelength pulse source with clock rate tunability is described. A tuning range of 32 nm and multiwavelength generation were achieved at a 10 GHz clock rate and a quasi-320 GHz OTDM signal. The device consists of a programmable PLC multiplexer and employs amplitude-to-wavelength conversion based on the Raman soliton effect     

Liquid‐Crystal Composites Composed of Photopolymerized Self‐Assembled Fibers and Aligned Smectic Molecules

A new liquid‐crystal composite, composed of photopolymerizable self‐assembled fibers and a smectic liquid crystal, and its photopolymerized composite have been prepared. The fibers oriented along the smectic layers are obtained by self‐assembly of an amino acid derivative with terminal methacryloyl groups in the smectic liquid crystal. The oriented fibrous structures are fixed by photopolymerization, resulting in the formation of microgrooves on the substrate surfaces. The aligned direction of the liquid‐crystalline molecules is changed to the direction along the fibers after thermal annealing. The patterning of liquid‐crystal alignment is achieved for these liquid‐crystal composites by patterned photopolymerization.     

Thermoelectric Properties of Rare Earth-Doped SrTiO3 Nanocubes

A giant Seebeck coefficient of ?890 μV/K at 500 °C has been observed in Y_0.2Sr_0.8TiO₃ prepared using nanocubes. Doping rare earth elements, RE, has revealed that small RE is effective to enhance the Seebeck coefficient. Through soft mode observations by Raman spectroscopy and structural calculations based on density functional theory, it has been found that the breakdown of inversion symmetry of the perovskite structure near the surface of nanocubes can be recovered by doping with small RE. Because the dielectric constant is strongly related to the surface structure in this compound, we suggest that RE doping modulates the potential barrier at the grain boundary, resulting in a pronounced energy filtering effect in Y doped SrTiO₃.     

A Novel Gateway Selection Technique for Throughput Optimization in Configurable Wireless Mesh Networks

Wireless mesh networks (WMNs) have attracted much attention due to their low up-front cost, easy network deployment, stable topology, robustness, reliable coverage, and so forth. These advantages are suitable for the disaster recovery applications in disaster areas, where WMNs can be advantageously utilized to restore network collapse after the disaster. In this paper, based on a new network infrastructure for WMNs, to guarantee high network performance, we focus on the issue of throughput optimization to improve the performance for WMNs. Owing to selecting different mesh router (MR) as the gateway will lead to different network throughput capacity, we propose a novel gateway selection technique to rapidly select the optimal MR as the gateway, in order to maximize the network throughput. In addition, we take into account the traffic distribution for the MR to eliminate traffic congestion in our method. The performance of our proposed method is evaluated by both numerical and simulated analysis. The simulation results demonstrate that the gateway selection method is effective and efficient to optimize the throughput for WMNs.     

A 1.0-V 230-MHz column access embedded DRAM for portable MPEGapplications

This paper describes a 32-Mb embedded DRAM macro fabricated using 0.13-μm triple-well 4-level Cu embedded DRAM technology, which is suitable for portable equipment of MPEG applications. This macro can operate 230-MHz random column access even at 1.0-V power supply condition. The peak power consumption is suppressed to 198 mW in burst operation. The power-down standby mode, which suppresses the leakage current consumption of peripheral circuitry, is also prepared for portable equipment. With the collaboration of array circuit design and the fine Cu metallization technology, macro size of 18.9 mm² and cell efficiency of 51.3% are realized even with dual interface and triple test functions implemented     

Subcellular localization of fructosyl amino acid oxidases in peroxisomes of Aspergillus terreus and Penicillium janthinellum

Fructosyl amino acid oxidase (FAOD) is the enzyme catalyzing the oxidative deglycation of Amadori compounds, such as fructosyl amino acids, yielding the corresponding amino acids, glucosone, and H(2)O(2). In a previous report, we determined the primary structures of cDNAs coding for FAODs from two fungal strains Aspergillus terreus AP1 and Penicillium janthinellum and we found that both fungal FAODs included the putative peroxisome targeting signal 1 (PTS1) at the carboxyl terminal (Yoshida, N. et al., Eur. J. Biochem., 242, 499-505, 1996). In this study, we determined the intracellular localization of FAODs in these two fungi. Subcellular fractionation experiments and immuno-electronmicroscopic observations, together with the previous findings indicated that the FAODs were localized in peroxisomes of A. terreus AP1 and P. janthinellum. These FAODs were also found to belong to a new member of "peroxisomal sarcosine oxidase family protein" in eucaryotic cells.     

A novel hemiacetal dehydrogenase activity involved in ethyl acetate synthesis in Candida utilis

Acetate ester synthesis was studied in vitro with the ethyl acetate-producing yeast Candida utilis. The level of enzyme activity observed for the NAD+-dependent hemiacetal dehydrogenase acting on hemiacetal, which was produced non-enzymatically from an alcohol and an aldehyde, was much greater than that for the other enzyme involved in ester synthesis, alcohol acetyltransferase. The level of ethyl acetate synthesis in vivo approximately paralleled the hemiacetal dehydrogenase (HADH) activity. The results suggest that the main pathway for ethyl acetate synthesis in C. utilis involves a novel hemiacetal dehydrogenase activity.     

Adaptive Fault Diagnosis of Analog Circuits by Operation-Region Model and X–Y Zoning Method

We have proposed a method for diagnosing analog circuits that is realized by combining the operation-region model and the X–Y zoning method. In the method, we could implement a diagnosis procedure based on a diagnostic method for digital circuits because we developed a data processing method to handle data discretely. In this paper, we improve the method by using an adaptive test to obtain a shorter diagnostic sequence length and show its characteristics. Moreover, we propose a new data processing method that utilizes the output response of a circuit to obtain better diagnostic performance. We demonstrate the effectiveness of the proposed methods by applying them to ITC’97 benchmark circuits with hard faults and soft faults. These improved methods can reduce the diagnostic sequence length without degrading the performance of diagnostic resolution and CPU time.     

Theatre in the Sky: a ubiquitous broadband multimedia‐on‐demand service over a novel constellation composed of quasi‐geostationary satellites

To meet an ever‐growing demand for wideband multimedia services and electronic connectivity across the world, development of ubiquitous broadband multimedia systems is gaining a tremendous interest at both commercial and academic levels. Satellite networks will play an indispensable role in the deployment of such systems. A significant number of satellite communication constellations have been thus proposed using Geostationary (GEO), Medium Earth Orbit (MEO), or Low Earth Orbit (LEO) satellites. These constellations, however, either require a potential number of satellites or are unable to provide data transmission with high elevation angles. This paper proposes a new satellite constellation composed of Quasi‐GeoStationary Orbit (Quasi‐GSO) satellites. The main advantage of the constellation is in its ability to provide global coverage with a significantly small number of satellites while, at the same time, maintaining high elevation angles. Based on a combination of this Quasi‐GSO satellites constellation and terrestrial networks, the paper proposes also an architecture for building a global, large‐scale, and efficient Video‐on‐Demand (VoD) system. The entire architecture is referred to as a ‘Theatre in the Sky’. Copyright © 2006 John Wiley & Sons, Ltd.     

A Water‐Soluble Mechanochromic Luminescent Pyrene Derivative Exhibiting Recovery of the Initial Photoluminescence Color in a High‐Humidity Environment

Switching of the luminescence properties of molecular materials in response to mechanical stimulation is of fundamental interest and also has a range of potential applications. Herein, a water‐soluble mechanochromic luminescent pyrene derivative having two hydrophilic dendrons is reported. This pyrene derivative is the first example of a mechanochromic luminescent organic compound that responds to relative humidity. Mechanical stimulation (grinding) of this pyrene derivative in the solid state results in a change of the photoluminescence from yellow to green. Subsequent exposure to water vapor induces recovery of the initial yellow photoluminescence. The color change is reversible through at least ten cycles. It is also demonstrated that this compound can be applied as a mechano‐sensing material in frictional wear testing for grease, owing to its immiscibility in non‐polar solvents and its non‐crystalline behavior. Transmission electron microscope and atomic force microscope observations of samples prepared from dilute aqueous solutions of the pyrene derivative on suitable substrates, together with dynamic light scattering measurements for the compound in aqueous solution, indicate that this amphiphilic dumbbell‐shaped molecule forms micelles in water.