Flow cytometric analysis of lectin-oligosaccharide interactions by using fluorescent oligosaccharide probes

Tetraphenylethylene (TPE) derivatives have strong fluorescence in aggregated state. We report here an oligosaccharide binding assay system using tetraphenylethylene derivatives bearing oligosaccharides with aggregation-induced emission (AIE) characteristics. A tetraphenylethylene derivative bearing 6'-sialyllactose (6'SL) bound to microbeads coated with SSA lectin more effectively than RCA120 lectin. Microbeads that bound to fluorescent oligosaccharide probes could be detected by flow cytometric analysis. Tetraphenylethylene derivatives bearing oligosaccharides are useful for flow cytometric analysis of lectin-oligosaccharide interactions.     

Selective nonanal molecular recognition with SnO2 nanosheets for lung cancer sensor

SnO₂ nanosheets were developed to detect nonanal gas in the order of ppb which was a marker of lung cancer. The nanosheets showed higher resistance change in nonanal gas than that in carbon monoxide (CO), nitrogen dioxide (NO₂), acetone (CH₃COCH₃), hydrogen (H₂), ethanol (C₂H₆O), ammonia (NH₃), hydrogen sulfide (H₂S), formaldehyde (HCHO), acetaldehyde (CH₃CHO), or butanal (C₄H₈O). Crystal surfaces of the nanosheets would be effective for adsorption of nonanal molecules. Furthermore, it was shown that resistance changed with an increase in carbon number in aldehyde. The nanosheets had molecular selectivity for a series of aldehyde molecules. Molecular recognition of the nanosheets gave us a great advantage to detect nonanal gas which was produced by lung cancer.     

A simple and fast method to disperse long single-walled carbon nanotubes introducing few defects

A simple and fast dispersion method that incorporates heating is used to disperse long (more than 10 μm) single-walled carbon nanotubes (SWCNTs) with minimal defects. The method enables a dispersed solution of SWCNTs to be produced in less than 10 min in only three steps: (1) addition of the dispersant, (2) heating, and (3) grinding. The dispersion method does not require sonication, which shortens the SWCNTs and can generate surface defects. SWCNT films were prepared from the dispersed solution, and the films exhibited a resistance of 380 Ω/sq at a transparency of 64.8%. This dispersion method can be easily scaled up, making it useful for the preparation of dispersed SWCNTs for commercial and industrial applications.     

Preparation and characterization of stable dispersions of carbon black and nanodiamond in culture medium for in vitro toxicity assessment

Stable dispersions of carbon black and nanodiamond in culture medium were prepared by adding a pre-mixed dispersion of commercial carbon black or nanodiamond in aqueous bovine serum albumin (BSA) solution to culture medium. Dynamic light scattering revealed that carbon black and nanodiamond dispersions prepared in both NaCl solution and culture medium were highly stable. From DLVO theory and the results of zeta potential measurements, the theoretical effect of the electrostatic interactions between adsorbed BSA molecules was found to be minimal. The asymmetric flow field-flow fractionation measurements revealed that 0.05 or 0.56 mg/mL of BSA molecules were adsorbed on 0.11 or 1.09 mg/mL of carbon black, respectively, indicating 1:2 complexation of BSA with the colloidal particles. In the case of nanodiamond, 0.06 or 0.60 mg/mL of BSA molecules were adsorbed on 0.10 or 1.05 mg/mL of nanodiamond, respectively, indicating 1:2 complexation of BSA, which is the same ratio as in the case of carbon black. The adsorbed BSA molecules served as an effective stabilizing agent for the carbon black and nanodiamond, ensuring dispersion stability for at least 1 week. The preparation of the dispersions can be easily carried out by other researchers for toxicity studies.     

Biocatalytic Synthesis of Nitriles through Dehydration of Aldoximes: The Substrate Scope of Aldoxime Dehydratases

Nitriles, which are mostly needed and produced by the chemical industry, play a major role in various industry segments, ranging from high‐volume, low‐price sectors, such as polymers, to low‐volume, high‐price sectors, such as chiral pharma drugs. A common industrial technology for nitrile production is ammoxidation as a gas‐phase reaction at high temperature. Further popular approaches are substitution or addition reactions with hydrogen cyanide or derivatives thereof. A major drawback, however, is the very high toxicity of cyanide. Recently, as a synthetic alternative, a novel enzymatic approach towards nitriles has been developed with aldoxime dehydratases, which are capable of converting an aldoxime in one step through dehydration into nitriles. Because the aldoxime substrates are easily accessible, this route is of high interest for synthetic purposes. However, whenever a novel method is developed for organic synthesis, it raises the question of substrate scope as one of the key criteria for application as a “synthetic platform technology”. Thus, the scope of this review is to give an overview of the current state of the substrate scope of this enzymatic method for synthesizing nitriles with aldoxime dehydratases. As a recently emerging enzyme class, a range of substrates has already been studied so far, comprising nonchiral and chiral aldoximes. This enzyme class of aldoxime dehydratases shows a broad substrate tolerance and accepts aliphatic and aromatic aldoximes, as well as arylaliphatic aldoximes. Furthermore, aldoximes with a stereogenic center are also recognized and high enantioselectivities are found for 2‐arylpropylaldoximes, in particular. It is further noteworthy that the enantiopreference depends on the E and Z isomers. Thus, opposite enantiomers are accessible from the same racemic aldehyde and the same enzyme.     

Partial discharge measurements in SF6 and air usingphase-resolved pulse-height analysis

Carries out a study on partial discharge (PD) phenomena in SF₆ gas and tries to construct a diagnostic system capable of separating noise from observed PD signals for assessing the condition of insulation performance in power apparatus. The authors have constructed a computer-aided PD measuring system which permits a time-sequential data acquisition and phase-resolved pulse height analysis. Using the PD measurement system, the authors measured 60 Hz AC PD in SF₆ gas and in air at atmospheric pressure for needle-plane electrodes with three different radii at the tip of the needle, 3, 30 and 500 μm. They proposed particular PD statistical parameters, unbalance ratios U _T and U_q of the pulse repetition rate and average of charge, respectively, between positive and negative PD pulses occurring per cycle; these parameters proved to be good indicators to distinguish PD occurring in SF₆ from that in air. The mechanism of PD inception was also discussed     

Electrodeposition of amorphous gold alloy films

The process for electroplating amorphous gold-nickel-tungsten alloy that we developed previously based on the addition of a gold salt to a known amorphous Ni-W electroplating solution was investigated further using the X-ray diffraction (XRD) method for the purpose of quickly surveying the effects of various experimental variables on the microstructure of the alloy. In this system the gold concentration in the plating bath was found to be critical; i.e., when it is either very low or very high, the deposit becomes crystalline to XRD. The deposit composition varies linearly with the mole ratio of Au to Ni in solution, and the alloy deposit is amorphous to XRD when the atomic ratio of Au/Ni in the deposit is between 0.5 and 1.5. At suitable concentrations of the metal ions, the deposit contains essentially no tungsten. By extending the work on the Au-Ni-W system, an amorphous Au-Co alloy plating process was also developed.     

Fractal characteristics of gas-solids flow in a circulating fluidized bed

A fractal approach is adopted to describe the dynamic behavior of a circulating fluidized bed. Two times series, differential pressure fluctuations along the riser height and solids momentum fluctuations along the radial direction, are measured and analyzed in terms of fractal dimensions. The influences of operating conditions and axial/radial positions on the fractal dimension are discussed. Attempts are also made to interpret the flow structure in the bed in terms of the fractal dimension. It is found that fractal analysis can provide a useful tool for understanding the characteristics of gas-solids flow in circulating fluidized beds.     

Polymers degradable under environmental conditions through end-modification of poly(α-methylstyrene) derivatives

To induce degradabilities in polymers in response to environmental conditions, the end-modification reactions of poly(α-methylstyrene) derivatives were carried out. When diphenylphosphine chloride was used as a modifier for the living end of para-substituted PMS, the coupling efficiency was ca. 50%. 2-Phenylallyl halide derivatives such as 2-phenylallyl bromide, 2-(4-tolyl)allyl bromide, and α-trifluoromethylstyrene were found to be suitable end-modification agents. For example, ω-2-phenylallyl PMS was prepared with almost quantitative functionality by the reaction of the living PMS with 2-phenylallyl bromide. In a similar way, ω-3,3-difluoro-2-phenylallyl and ω-2-(4-tolyl)allyl PMS derivatives were synthesized. Based on thermogravimetric analysis, onset of the degradation temperature of the end-modified PMS derivatives decreased in the following order: ω-hydrogen- > ω-3,3-difluoro-2-phenylallyl- > ω-2-phenylallyl- > ω-2-(4-tolyl)allyl-PMS. Actually, the onset temperature of ω-2-(4-tolyl)allyl-PMS derivatives was 50°C lower than that of ω-H-PMS derivatives. These results indicate that the active species is produced effectively at the end unsaturated bond, which initiates the depolymerization of the polymer at rather low temperatures. Ionic degradation of these polymers was also investigated using butyllithium as an anionic initiator and methanesulfonic acid as a cationic initiator. Tendencies similar to the thermal degradation were observed. Therefore, it is concluded that a 2-phenylallyl substituent at the end of the PMS chain induces effective degradation through several mechanisms such as radical, anionic and cationic depolymerization reactions.