Effect of oxygen on the wettability of sapphire by liquid palladium

The surface tension of liquid palladium and the contact angle between liquid palladium and sapphire have been measured at 1833 K as a function of oxygen pressure by the sessile drop method. Oxygen acted as a surface-active element on the surface of liquid palladium and at the interface between liquid palladium and sapphire, resulting in the decrease of the surface tension and the contact angle. The work of adhesion calculated from their values increased with increasing oxygen pressure, and had a constant value above 400 Pa. The maximum excess concentration of oxygen was estimated to be 7.3×10^–6 mol m^–2 for the surface and 6.9×10^–6 mol m^–2 for the interface.     

Oxidation of methane to formaldehyde over Fe/SiO2 and Sn---W mixed oxides

In an attempt to develop new catalysts for the formation of formaldehyde from methane, the promotion effect of Fe on SiO₂ and that of Sn on WO₃ have been studied. The formation of formaldehyde on silica can be appreciably enhanced by the impregnation of Fe, as far as iron loadings are kept below 0.1 atom.% (Fe/Si × 100). In the case of Sn---W---Ox catalysts, both the addition of Sn to WO₃, and that of W on SnO₂ were effective to the selective formaldehyde formation. Absorption spectra (UV-Vis) and ESR measurements revealed that tetrahedrally coordinated Fe³⁺ in the silica network plays an important role in the formation of formaldehyde. A thin surface layer consisting of W and Sn oxides can account for the selective formaldehyde formation on the Sn---W---Ox catalysts.     

An image processing system using Image Signal Multiprocessors (ISMPs)

This paper describes an image processing system using Image Signal Multiprocessors (ISMPs) adapted to gray-level image preprocessing for image analysis and image enhancement. It is composed of four ISMPs, five 1H-delay-lines, two 512×512×8-bit frame memories, a video timing controller (VTC), two 256-word ×8-bit ×8-table Look Up Tables (LUTs) and 80 nsec/sampling A/D and D/A converters. This multiprocessor system performs convolution operations such as spatial filters, contrast enhancement, and binarization for gray-level images, thinning, thickening, pattern matching etc. for binary images, and image quality improvement for moving images such as T.V. images. Otherwise, it performs feature extraction operations such as area calculations, fillet coordination, and moment calculations for objective image data. Moreover, this system is capable of applying color image processing by using a multiboard system.     

Direct contact melting of porous material

The direct contact melting of a porous material is investigated experimentally and analytically. The phase change material (PCM) is made of fine ice particles of a nearly uniform diameter, which is changed as a parameter. In the analysis, two models are proposed. One is calculated as the direct contact melting of a monolithic sample and another is treated as an assembly of the direct contact melting of the individual particles. As a result, it was found that the heat flux increased with the diameter, due to increase of permeability in a case of small diameter. But, in a case of large diameter, the heat flux decreased as the particle diameter increased because the direct contact melting occurred independently for the individual particles.     

Simulation study of eutrophication in Hiroshima Bay: Simulation of particulate and dissolved organic matter using cyclic transformation of carbon

A phytoplankton model, which includes a carbon cycle combined with a constant current obtained by the computation of tidal currents, was applied to the coastal region (Hiroshima Bay, Japan). The transformation rate constants for the carbon cycle were experimentally evaluated.The seasonal variations of particulate and dissolved organic matter by the simulation model were reasonably consistent with the field data. Carbon concentration increased by primary production in the upper layer was approx. 10 times that augmented by loading of carbon from land at the shore in summer. Sinking plays an important role in the elimination of particulate organic matter. On the other hand, horizontal advection and turbulent diffusion are important factors for the diminution of dissolved organic matter.     

A monocyte chemotactic factor, S19 ribosomal protein dimer, in phagocytic clearance of apoptotic cells

HL-60 cells derived from a human promyelocytic leukemia underwent apoptosis by heat treatment. When the heat-treated HL-60 cells were injected into guinea pig skin, monocyte/macrophage infiltration was observed 24 or 36 hours later, and the apoptotic cells were phagocytically cleared by 48 hours after their injection. The infiltration and clearance patterns were quite different from those observed in injection of necrotic or boil-fixed HL-60 cells. The apoptotic cells released a monocyte chemotactic factor in vitro 24 hours after the heat treatment. The chemotactic factor generated was identified as the cross-linked homodimer of S19 ribosomal protein by its immunologic and physicochemical properties. A serine protease that inactivates the monocyte chemotactic factor was also released from the apoptotic cells 30 hours after the heat treatment. A super infusion of this protease into the skin where the apoptotic cells had been injected diminished the number of infiltrated monocytes. The present results indicate an important role of the S19 ribosomal protein dimer in the phagocytic clearance of apoptotic cells.     

Identification of osteopontin in human dental calculus matrix

Osteopontin is a prominent non-collagenous component of bone matrix, although it is expressed in several other tissues. Recently, osteopontin was reported to be involved in urinary stone formation and atherosclerotic lesions of the aorta, suggesting that it may be a key protein associated with these types of pathological mineralization. In this study, whether or not human dental calculus contains osteopontin was investigated by immunoblotting and immunohistochemical analyses. After extraction of calculus proteins with EDTA and separation of the proteins by electrophoresis, immunoblotting analysis revealed the presence of osteopontin. Two forms of osteopontin appeared at 61 and 68 kDa on 10% polyacrylamide gel and the proteins were digested with thrombin, a highly specific protease. Moreover, immunohistochemical analysis revealed that osteopontin was localized in dental calculus adherent to tooth roots. These findings indicate that osteopontin is, in fact, present in human dental calculus and may be involved in calculus formation as the stone matrix.     

RANTES-induced T cell activation correlates with CD3 expression

The chemokine RANTES induces a unique biphasic cytoplasmic Ca2+ signal in T cells. The first phase of this signal, similar to that of other chemokines, is G-protein mediated and chemotaxis associated. The second phase of this signal, unique to RANTES and evident at concentrations greater than 100 nM, is tyrosine kinase linked and results in a spectrum of responses similar to those seen with antigenic stimulation of T cells. We show here that certain jurkat T cells responded to RANTES solely through this latter pathway. A direct correlation between the RANTES-induced second phase response and CD3 expression was demonstrated in these cells. Sorting the Jurkat cells into CD3(high) and CD3(low) populations revealed that only the CD3(high) cells were responsive to RANTES. Furthermore, stimulation of these Jurkat cells with anti-CD3 mAb significantly depresses their subsequent response to RANTES. While a RANTES-specific chemokine receptor is expressed at a low level on these Jurkat cells, the RANTES-induced activation is dependent on the presence of the TCR. Thus, stimulation through TCR may partially account for RANTES' unique pattern of signaling in T cells.