Sero-epidemiological study on equine influenza in Japan

Ten male subjects performed five maximal treadmill running tests at 7 mph. Tests included two (test-retest) progressive, step increment (2 1/2% grade elevation), discontinuous tests (DCT); a progressive, step increment, continuous test (ct) and two constant load tests (CL and CL +2 1/2%). A DCT test was performed first for establishment of peak elevation levels as constant load tests were performed at the peak elevation level attained (CL) and at a level 2 1/2% higher (CL + 2 1/2%). The second DCT test and the remaining three tests were administered randomly. Peak preformance capability (operationally defined as duration at highest grade elevation) was markedly reduced during progressive tests as compared with constant load tests. There was a similar reduction in peak performance capability during the CT test as compared with DCT test. Maximal oxygen uptake (VO2max) was quite similar among the various tests. It was concluded that VO2max attained during progressive, step increment, tests is unaffected by cumulative submaximal work. Discontinuous and continuous progressive tests provide similar VO2max results.     

Advantages of counter-current operation for hydrodesulfurization in trickle bed reactors

The deep desulfurization of oil fraction is a central matter of concern to every refinery. Hydrogen sulfide is the product of hydrodesulfurization reaction and it is the inhibiter of the reaction. When products inhibit the reaction, the counter-current operation is expected to have an advantage over the co-current operation. Hydrodesulfurization of vacuum gas oil in a trickle bed reactor was simulated for both models of co-current operation and counter-current operation. The models were simulated on high and low gas and liquid velocities. Hydrogen sulfide was affected by mass transfer resistance in both gas-liquid and liquid-catalyst interface. The other component mass transfer resistances were negligible. When the deep desulfurization was required, simulation results showed that the counter-current operation was superior to the co-current operation in organic sulfur conversion     

Factors affecting the oxidative activity of laccase towards biphenyl derivatives in homogeneous aqueous-organic systems

Catalytic oxidation of biphenyl derivatives was investigated using laccase in a homogeneous aqueous-organic system. A thermostable laccase from Trametes sp. showed the highest catalytic activity for the oxidation of 4-hydroxybiphenyl (4-HB) at a reaction temperature of 60 degrees C when dimethylsulfoxide (DMSO) was employed as a co-solvent. Furthermore, the catalytic performance was successfully enhanced by the incorporation of a laccase mediator system (LMS) into the aqueous-DMSO media. The catalytic performance strongly depended on the type of mediator, and the highest activity was observed with 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as mediator, suggesting the importance of the selection of a suitable mediator. It was verified that this mediator system is applicable to the oxidation of several biphenyl derivatives with hydroxyl groups.     

Solvent extraction and stripping of silver ions in room-temperature ionic liquids containing calixarenes

We found that a calix[4]arene-bearing pyridine is soluble in a typical room-temperature ionic liquid (RTIL), 1-alkyl-3-methylimidazolium hexafluorophosphate. Pyridinocalix[4]arene showed a high extraction ability and selectivity for silver ions. The extraction performance of the calix[4]arene was greatly enhanced by dissolution in RTILs compared to in chloroform. In a competitive extraction test using five different metal ions (Ag+, Cu2+, Zn2+, Co2+, Ni2+), only silver ions were transferred by the calix[4]arene from the aqueous feed phase into the RTILs, through a cation-exchange mechanism. The pyridinocalix[4]arene was found to form a stable 1:1 complex with silver ions, both by slope analysis and by Job's method. Since it is easy to strip silver ions from RTILs by controlling the aqueous-phase pH, the extraction performance of calix[4]arene in RTILs was maintained after five repeated uses.     

Aligned bioactive mesoporous silica coatings for implants

Ongoing research is reported aimed at preparing mesoporous silica coatings on various substrates for medical applications by a biomimetic approach (self-assembling of organic/inorganic sol-gel systems into ordered structures). Tetraethylorthosilicate (TEOS) was selected as the silica precursor, and amphiphilic triblock copolymers poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), and the cationic surfactant cetyltrimethyl ammonium chloride (CTAC), as structure-directing agents. The mesochannels diameter could be adjusted by changing the directing agent, and a preferred alignment of the mesostructure was observed independently of the used substrate (glass, silicon, Ti or Ti6Al4V). Three different treatments (thermocalcination, photocalcination, and solvent extraction) have been also studied to remove the organic templates, of which photocalcination showed to be the most versatile. When soaked in a simulated body fluid, mesoporous silica coatings induced apatite formation after seven days.     

An improved procedure of electron microscopic in situ hybridization for detecting adenovirus DNA

Electron microscopic in situ hybridization (EM-ISH) is a useful method in determining the localization of a specific nucleic acid at the ultrastructural level. Since the EM-ISH protocol includes many steps, no standard protocol for EM-ISH is available yet. In this study, we optimized quantitatively the critical conditions with respect to embedding resin, nucleic acid labeling and hybridization reaction time, by using adenovirus-infected cells as the indicator cells. The optimal detection of an adenovirus-specific nucleic acid was obtained by overnight hybridization reaction on sections embedded in Lowicryl K4M resin. Random-primed-labeled probes improved the reactivity. At least 60% of virus particles in paracrystalline arrays was found to contain viral DNA. These arrays in adenovirus-infected cells are useful in evaluating quantitatively the efficiency of protocols of EM-ISH.     

Pore structure of porous ceramics synthesized from water-based slurry by freeze-dry process

A unique porous ceramic with complex pore structure was synthesized by the freeze-dry process. A water-based ceramic slurry was frozen while controlling the growth direction of ice, and sublimation of the ice were generated by drying it at a reduced pressure. By sintering this green body, a porous ceramic with complex pore structure was obtained, where macroscopically aligned open pores exceeding 10 m in size contained minute pores of about 0.1 m in their internal walls. Wide control of the porosity was possible by changing the concentration of the starting slurry. The pore size distribution as well as the microstructure were substantially affected by the freezing and sintering temperatures. Optimization of the synthesis conditions was investigated in order to obtain the desired pore structure.     

Dual representation and its online scheduling method for event-varying DESs with capacity constraints

This research focuses on event varying discrete event systems with capacity and order constraints, and derives two state-space representations that stand for the earliest and latest times of event occurrences. Moreover, we consider rescheduling methods for these representations that can be applied even when the relevant parameters are changed after the commencement of the job. The two state-space representations derived have forms that are similar to dual systems in modern control theory. In online scheduling, it is often essential to keep track of state changes or the float times of jobs continuously. For the calculation of the float times, both earliest and latest times must be calculated. Hence, the derived representations are an attractive tool for solving online scheduling problems.     

Plastic Buckling Transition Modes in Moderately Thick Cylindrical Shells

Moderately thick perfect cylindrical shells under axial compression first exhibit an axisymmetric buckling mode, where a localization of buckling patterns, referred to as an elephant foot bulge, is caused by the first plastic bifurcation. However, the transition from the axisymmetric buckling mode to a nonaxisymmetric buckling mode, referred to as a diamond buckling mode, may occur due to the next bifurcation if we continue the loading under displacement control. Herein, this phenomenon is examined, based on a rigorous plastic bifurcation analysis. As a result, it is observed that the circumferential wave number of the diamond buckling mode increases with the decrease of the wall thickness. The boundary conditions also considerably influence the occurrence of diamond buckling. It is found that the strain concentration is intensified for the diamond buckling modes, compared with the axisymmetric modes.