Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

加油站电气改造应重视的几个问题

由于加油站电气改造工程的质量对加油站的日常经营和安全管理有重大影响，针对改造中存在的一些共性问题，根据国家有关规范和标准，从电气改造工程的设计、配电系统、配电线路，以及防雷、防静电和防过电压等方面提出了要求和建议。     

机械过冷的制冷系统在汽车空调中的应用

由于很多汽车空调采用斜盘式压缩机，有利于采用机械过冷的制冷系统，来增加汽车空调的制冷量、提高制冷效率。本文的主要目的是通过对系统工质的流量分配、空调制冷量和性能系数(COP)与中间压力之间的变化关系的研究，来研究机械过冷在汽车空调中应用的可行性。     

筛查基因突变的新技术——循环双脱氧指纹图谱法及其应用

建立了适用于大批量标本基因突变筛查的双脱氧指纹图谱法即ｄｄＦ。该技术民测定ＤＮＡ序列的双脱氧末端终止法及ＳＳＣＰ二者长处于一身，即只作一个双脱氧末端终止反应，然后将反应产物在与ＳＳＣＰ相同的电泳条件下进行聚丙烯酰胺凝胶电泳，这样有突变的样品不会漏检，阳性检出率高达１００％。     

提高润滑油基础油氧化安定性的组合工艺

以生产润滑油基础油的老三套工艺为基础，开发了改善油品氧化安定性的组合工艺。该工艺的主要特点是包括一步络合脱氮过程。实验证明，该组合工艺既可以有效地提高基础油的氧化安定性，又能降低溶剂精制深度，提高基础油收率。     

雁栖水厂的规划与设计

雁栖水厂位于北京市怀柔区雁栖镇下庄村南，距怀柔县城6km，占地面积0．78hm^2．设计日供水能力5000t。雁栖水厂集中反映了北京市农村安全饮水工作的模式和经验，下面从规划、设计、管理等三方面对雁栖水厂进行介绍。     

丙酮酸乙酯合成新工艺

以叔丁基过氧化氢(TBHP)为氧化剂,四丁基溴化铵(TBAB)为相转移催化剂,有效地将乳酸乙酯氧化合成丙酮酸乙酯,产品纯度达98% 以上.该反应操作简单,无污染, 为丙酮酸乙酯合成开辟了新方向.     

聚烯烃塑料改性的研究进展

聚乙烯、聚丙烯以优良的力学性能、热性能、加工性能等成为最主要的聚烯烃塑料品种,大量用于生产薄膜、管材和板材。通过改性可获得高刚性、高强度、高耐热、低成本的聚烯烃塑料。综述了近年来聚乙烯和聚丙烯在接枝、交联、填充、共混等方面的改性进展,并指出了研究方向和发展趋势。