Synthesis of Various Calix[4]arene Derivatives with Mercaptoalkyl Chains and Their Application in Removing Cr(VI) from Aqueous Solution

Four different mercaptoalkyl-substituted calixarene derivatives (5,11,17,23-tetra-tert-butyl-25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(5-mercaptopentanoxyl)-26,28-dihydroxycalix[4]arene and 5,17-di-tert-butyl-11,23-di-carboxyl-26,28-bis(3-mercaptopropoxyl)-25,27-di-hydroxycalix[4]arene) were synthesized. Their structures were characterized by Fourier transform infrared spectroscopy (FTIR), ¹H and ¹³C NMR spectroscopy, and elemental analysis techniques. Moreover, their extraction capabilities at different parameters such as pH, shaking speed, and shaking time were examined toward dichromate ions. Results implied that all mercaptoalkyl-substituted calixarene derivatives showed an extraction capability toward dichromate anion while the carboxyl-functionalized calixarene-marcapto-alkyl derivative exhibited the highest extraction capability.     

Impact of frying on key fatty acid ratios of canola oil

The study was carried out to investigate the changes in saturated (SFA), monoene (MUFA), trans (TFA), and polyunsaturated (PUFA) fatty acids and the key fatty acid ratios (SFA/UFA, cis PUFA/SFA, C18:2/C16:0 and C18:3/C16:0) during potato chips frying in canola oil using single bounce attenuated total reflectance FTIR (SB‐ATR‐FTIR) spectroscopy. The data obtained from GC‐FID were used as reference. The calibration of main fat groups and their key fatty acid ratios were developed by partial least square (PLS) regression coefficients using 4000 to 650 cm^?1 spectral range. FTIR PLS regression for the predicted SFA, MUFA, TFA, and PUFA were found 0.999, 0.998, 0.998, and 0.999, respectively, whereas for SFA/UFA, cis PUFA/SFA, C18:2/C16:0 and C18:3/C16:0 the regression coefficients were 0.991, 0.997, 0.996, and 0.994, respectively. We conclude that FTIR‐PLS could be used for rapid and accurate assessment of changes in the main fat groups and their key fatty acid ratios ratio during the frying process. Practical applications: FTIR‐ATR method is very simple, rapid, and environmentally friendly. No sample preparation is required and one drop of oil is enough for FTIR analysis. The proposed method could be applied for quick determination of key fatty acid ratios in the food processing industry.     

The effect of magnetic field on the impurity binding energy of shallow donor impurities in a Ga1?xInxNyAs1?y/GaAs quantum well

Using a variational approach, we have investigated the effects of the magnetic field, the impurity position, and the nitrogen and indium concentrations on impurity binding energy in a Ga_1−xIn_xN_yAs_1−y/GaAs quantum well. Our calculations have revealed the dependence of impurity binding on the applied magnetic field, the impurity position, and the nitrogen and indium concentrations.     

Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

One step densification of SDC—Na2CO3 nano-composite electrolytes for SOFC applications by cold sintering process

Sm_0.2Ce_0.8O_1.9- 30% Na₂CO₃ (Sm doped ceria (SDC)-30N) nano-composite electrolytes were densified in a single step via cold sintering process (CSP). At 200°C and 450 MPa of uniaxial pressure, samples up to 97% of their theoretical density could be obtained. The effect of processing parameters, such as temperature, uniaxial pressure, processing duration, and moisture content, on the densification of the nano-composite electrolytes was investigated. The thermal, microstructural, and electrical properties of nano-composites were investigated by differential scanning calorimetry, X-ray diffractometer, scanning electron microscope, and EIS analysis. SDC crystallite sizes were found to be around 25 nm, barely coarsened after CSP by which the true nano nature of the nano-composite could be preserved. Because, by conventional processing high density values could not be attained and high processing temperatures in excess of 600°C had to be used, promoting particle coarsening. The highest total electrical conductivity was found to be 2.2 × 10⁻² S cm⁻¹ at 600°C, with an activation energy of 0.83 eV for SDC-30N nano-composites. The present investigation revealed that the implementation of cold sintering technique resulted in significant enhancements in the densification of nano-composite electrolytes, thereby rendering them suitable for efficient utilization in SOFC applications, as compared to the conventional production methods.     

Highly crystalline and oriented high‐strength poly(ethylene terephthalate) fibers by using low molecular weight polymer

High‐strength poly(ethylene terephthalate) (PET) fibers were obtained using low molecular weight (LMW) polymervia horizontal isothermal bath (hIB), followed by postdrawing process. We investigated the unique formations of different precursors, which differentiated in its molecular orientation and crystalline structures from traditional high‐speed spinning PET fibers. Sharp increase in crystallinity was observed after drawing process even though the fibers showed almost no any crystallinity before the drawing. Properties of as‐spun and drawn hIB and control filaments at different process conditions were compared. As would be expected, performances of resulted treated undrawn and drawn fibers have dramatically improved with developing unique morphologies. Tenacities more than 8 g/d for as‐spun and 10 g/d for drawn treated fibers after just drawn at 1.279 draw ratio were observed. These performances are considerably higher than that of control fibers. An explanation of structural development of high‐strength fibers using LMW polymer spun with hIB is proposed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42747.     

Portable Infrared Spectrometer to Characterize and Differentiate Between Organic and Conventional Bovine Butter

The performance of a portable infrared system combined with pattern recognition to discriminate between organically and conventionally produced bovine butter samples as well as to predict the levels of conjugated linoleic acid (CLA) were evaluated. Sixty butter (27 organic and 33 conventional) samples were used in this study. Bovine butter–fat were applied onto an attenuated total reflectance infrared (ATR‐IR) accessory equipped with a five‐bounce ZnSe crystal set at 65 °C for spectral collection. In addition, ATR‐IR spectra of bovine butter were directly collected at room temperature to avoid phase separation. The fatty acid profile and the levels of CLA were determined using reference FAME‐GC‐FID analysis. SIMCA models showed well separated clusters that discriminated between organic and conventional bovine butters due to C=C trans bending out of the plane vibration modes band at 967 cm^?1. Additionally, strong PLSR models were developed to predict CLA levels using butter–fat and bovine butter spectra with SEP of 0.05 % and RPD of 4.7, indicating that the models are suitable for quality control applications. Portable IR technology offers the ability for “in situ” analysis of butters that is much less time consuming than current analytical practices for authentication and quality control efforts by the industry.     

Electrospun nylon 6,6 nanofibers functionalized with cyclodextrins for removal of toluene vapor

Functional nylon 6,6 nanofibers incorporating cyclodextrins (CD) were developed via electrospinning. Enhanced thermal stability of the nylon 6,6/CD nanofibers was observed due to interaction between CD and nylon 6,6. X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared spectroscopy studies indicated the existence of some CD molecules on the surface of the nanofibers. Electrospun nylon 6,6 nanofibers without having CD were ineffective for entrapment of toluene vapor from the environment, whereas nylon 6,6/CD nanofibrous membranes can effectively entrap toluene vapor from the surrounding by taking advantage of the high surface‐volume ratio of nanofibers with the added advantage of inclusion complexation capability of CD presenting on the nanofiber surface. The modeling studies for formation of inclusion complex between CD and toluene were also performed by using ab initio techniques. Our results suggest that nylon 6,6/CD nanofibrous membranes may have potential to be used as air filters for the removal of organic vapor waste from surroundings. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41941.