Effect of yttrium on the stability of aluminide-yttrium composite coatings in a cyclic high-temperature hot-corrosion environment

A composite coating of aluminide-yttrium has shown excellent corrosion resistance in a cyclic high-temperature hot-corrosion environment. To understand the effect of yttrium on the stability of the composite coating, the specimens were prepared with various coating parameters of Y thickness, sequence of post heat treatment and surface condition before Y-ion plating. Performance of the composite coating was evaluated by isothermal oxidation and cyclic high-temperature hot corrosion. Isothermal-oxidation-test results show that the Y in the composite coating helps to form a thick and dense Al₂O₃ scale which is ductile and resistant to thermal stress. The Y in Al₂O₃ may act as a donor which leads to an increase in concentration of interstitial oxygen and, thus, increases in oxidation rate. The presence of Y₂O₃ and (Y, Al) O-type compounds in grain boundaries of Al₂O₃ and boundaries between the Al₂O₃ and NiAl effectively prohibits the fast diffusion of oxidants (such as O and S) and Al along grain boundaries. Consequently, it may induce slow diffusion through the matrix, and thus the corrosion resistance of the composite coating under cyclic hot corrosion increases substantially.     

The influence of titanium on the electrochemical properties of the AB5-type metal hydrides

AB₅-type intermetallic compounds were prepared by arc-melting in argon atmosphere. The composition of a stoichiometric compound LaNi_3.6Al_0.4Co_0.7Mn_0.3 with a hexagonal CaCu₅ structure was varied by stoichiometric and nonstoichiometric addition of Ti. With the increase of the Ti y0.05 content in LaNi_3.6Al_0.4Co_0.7Mn_0.3Ti_y, the hydrogen storage capacity is enhanced, whereas when y=0.1–0.3, it is decreased. The discharge capacity and cyclability are increased considerably by addition of titanium in the range of 0.02–0.1 with a maximum value at about 0.1%. The highest maximum capacity is achieved for a nonstoichiometric addition of 0.05% Ti. The kinetic properties are also additionally improved by the formation of a titanium-rich second phase. This can explain the improvement of the capacity for alloys with low Ti content. The decrease in capacity for high Ti content was also correlated with the amount of the Ti-rich phase. Therefore, the improvement of kinetics are due to the catalytic effect, grain boundary diffusion effect or more pronounced alloy pulverization upon cycling. This study has been aimed to improve the electrode properties of a series of multicomponent LaNi_3.6Al_0.4Co_0.7Mn_0.3Ti_y (y=0.0, 0.02, 0.05, 0.1, 0.2, 0.3) alloys which have mutual complementary properties. All the prepared alloys have been subjected to analyses by EDS, SEM and XRD. In order to determine the hydrogen storage capacity, the pressure composition isotherms (P–C–T curves) have been used. The metal hydride electrodes were characterized by galvanostatic cycling test.     

Effect of low-cycle fatigue on the hot ductility of plain carbon steel

In a continuous casting steelmaking operation, the surface of a slab is under a condition that can be characterized as high-temperature, low-cycle fatigue in which the tensile and compressive stress is repeatedly developed. For this reason, for the evaluation of the hot ductility of a slab, considering the fatigue deformation is more feasible before a tensile or compressive test. In this study, the effects of low-cycle fatigue on the hot ductility of steels with a carbon content of 0.06–0.8 wt.% are investigated at various temperatures. For a carbon content of 0.06%, there were no significant differences between the RA values from a simple tensile test and those from a tensile test after fatigue deformation. The tendency of ductility deterioration with fatigue deformation is evident in 0.1 %C steel, and is due to the deformation-induced ferrite film that forms around the prior austenite grain. Conversely, high carbon steel containing 0.8 %C did not show a recovery of hot ductility in a low temperature region, and the specimen on which the tensile was measured after fatigue showed a higher hot ductility in the low temperature region, which is thought to result from the pearlite refinement effects. As the results obtained in this work showed noticeable differences in the hot ductility of carbon steel through the test conditions, it is suggested that for more accurate data, fatigue deformation be adopted in which the temperature range in an unbending operation is determined in the steelmaking factory.     

Magnesium interlayered diamond coating on silicon

Diamond thin films have been deposited using hot filament chemical vapour deposition technique on manually scratched p-Si(1 0 0) substrate, with and without magnesium interlayer. In spite of magnesium melting point being lower (T_m = 649 °C) than the growth temperature of the substrate (T_s  750 °C) used in these experiments, it was found that high quality diamond films could be grown on Mg covered substrate. A liquid substrate is probably generated during the diamond film growth. Raman spectroscopy analysis exhibited only the triply degenerate, zone centre optical phonon peak at 1333 cm⁻¹ indicating that nearly stress free crystallites were present. Broadening of the Raman peak (11.76 cm⁻¹) indicates that some small crystallites also are present. Scanning electron and atomic force microscopy accompanied by X-ray diffraction analysis where used to compare the details of diamond film growth directly on scratched Si(1 0 0) and Mg interlayered scratched Si(1 0 0) substrates.     

Frequent Interaction and Fast Feedback Predict Perceived Social Support: Using Crawled and Self‐Reported Data of Facebook Users

The present study examines if Facebooking can contribute to psychological well‐being and if so, which aspects of Facebook use could play a significant role. Matching crawled data with self‐reported data from mobile Facebook users, we found that more social interactions with Facebook friends and faster friends' reactions to a user's post contributed toFacebook user's perceived social support and ultimately alleviated loneliness. We also found that the association between frequency as well as speed of Facebook social interactions and psychological well‐being were more significant among those who were sensitive to other's behaviors and feelings than those who were not. The theoretical and practical implications of the findings, particularly regarding mobile communication context, are also discussed.     

Partial consensus of identical feedforward dynamic systems with input saturations

This paper studies the partial consensus problem for identical feedforward dynamic systems with input saturations. We construct two consensus protocols using the partial‐state information and full‐state information, respectively. Applying a change of coordinates, feedforward system is transformed into the block diagonal form. Then, by utilizing the bounded real lemma and small gain theorem, we solve the partial consensus problem, and the existence of each protocol is derived. Copyright © 2015 John Wiley & Sons, Ltd.     

Formation stabilization and resizing based on the control of inter‐agent distances

We propose a control strategy that could steer the group of mobile agents in the plane to achieve a specified formation. The control law could be implemented in a fully decentralized manner so that each agent moves on their own local reference frame. Under the acyclic minimally persistent graph topology, each agent measures the relative displacements of neighboring agents and then adjusts the distances between them to achieve the desired formation. As well as achieving a fixed formation, we could resize the formation only by changing the leader edge, which connects the leader with the first‐follower in acyclic minimally persistent graph, without changing the structures of the control law. Copyright © 2014 John Wiley & Sons, Ltd.     

Gender Differences in Mouse and Cursor Movements

Computer cursor and mouse activities such as moving, pointing, selecting, and dragging are essential parts of everyday interactions. Yet it is unknown how men and women differ in the way they move computer cursors. This study examines gender differences in movements of computer cursors. In one experiment, the authors measured trajectories of computer cursors every 20 ms in a simple choice-reaching task and tested the extent to which movement features related to controlling and targeting diverge between male and female participants. Results showed significant gender differences in cursor motions. Female participants deviated from the straight path toward the target location to a larger degree than did male participants, and female participants showed more backward motions (deviating backward from the target location) than did male participants. Implications for sources of these gender differences, user interface and input device design, and musculoskeletal disorders in women are also discussed.     

Cognitive evaluation for conceptual design: cognitive role of a 3D sculpture tool in the design thinking process

ABSTRACT

This study focuses on the decisive role played by the digital design environment in the cognitive design process and design thinking. To analyse the cognitive role of digital design tools, we carried out a protocol analysis of conventional design sketching and a 3D sculpture tool. Cognitive evaluation was a differentiating factor when considering the contextual role of the 3D sculpture tool in subsequent evaluations, non-sequential evaluations for conversion, and passive approaches within the design process. Cognitive evaluation played the following roles: validation, extension, navigation, exploration, and confirmation. The navigation, exploration, and extension roles played by non-sequential evaluation were mainly related to inductive design thinking. Finally, the types of cognitive evaluation and their roles when using the 3D sculpture tool were different, according to the design thinking type. This study explored the multidimensional roles of cognitive evaluation using a 3D sculpture tool and its relationship with design thinking types.