A risk management approach to safety assessment of trenchless technologies for culvert rehabilitation

Proper functioning of culverts is not only critical to protecting the transportation system from flooding but also critical to maintaining the expected service life of the overall transportation system. During the service life of culverts, they deteriorate due to many reasons such as corrosion caused by road salt, blockage by debris and sediment, poor construction techniques, etc. Trenchless technologies have been used by several State Departments of Transportation (DOTs) to rehabilitate deteriorated drainage structures without disrupting the traffic and within a relatively short span of time. These technologies provide many benefits in terms of cost, time, quality, and expected service life. However, the safety aspects of these techniques have not been discussed and documented in detail probably due to the complexity and the lack of safety standards and specifications directly associated with the techniques. This paper discusses the application of a risk assessment framework to assess potential safety issues of currently available trenchless technologies for culvert rehabilitation. The findings of the study will provide additional information to improve the decision making process in selecting and planning culvert rehabilitation projects.     

Transmission performance of 10-Gb/s 1550-nm transmitters using semiconductor optical amplifiers as booster amplifiers

We have demonstrated the transmission performance of 10-Gb/s transmitters based on LiNbO/sub 3/ modulator using semiconductor optical amplifiers (SOAs) as booster amplifiers. Utilizing the negative chirp converted in SOAs and self-phase modulation induced by high optical power, we can successfully transmit 10-Gb/s optical signals over 80 km through the standard single-mode fiber with the transmitter using SOAs as booster amplifiers. SOAs can be used for booster amplifiers with a careful adjustment of the operating conditions. In order to further understand an SOA's characteristics as a booster amplifier, we model SOAs and other subsystems to verify the experimental results. Based on the good agreement between the experimental and simulation results, we can find the appropriate parameters of input signals for SOAs, such as extinction ratio, rising/falling time, and chirp parameter to maximize output dynamic range and available maximum output power (P/sub o,max/).     

A printer model using signal processing techniques

An accurate printer model that is efficient enough to be used by halftoning algorithms is proposed. The proposed signal processing model (SPM) utilizes a physical model to train adaptive linear combiners (ALCs), after which the average exposure of each subpixel for any input pattern can be calculated using the optimized weight vector. The SPM can be used to model multi-level halftoning and resolution enhancement, as well as traditional halftoning. The SPM is comprised of a single ALC layer followed by a peak-to-average ratio (PAR) correction layer, which serves to produce a PAR of less than 1.5 in the modeled exposure. The PCN (PAR correction network) employs one ALC/pixel and exploits the physics governing the characteristics of exposure in small regions. A relatively small number of training patterns suffices to train the SPM.     

Design and fabrication of a significantly shortened multimode interference coupler for polarization splitter application

We report that we have successfully designed and fabricated a significantly shortened multimode interference coupler for application in polarization splitter, using a phenomenon that we termed "quasi-state" (QS) imaging effect. First, we identified and analyzed the QS imaging effect, and, based on the QS analysis, designed and fabricated a novel multimode interference (MMI) device with its split length shortened to 1/5 of a normally designed MMI split length. The fabrication is simple and cost effective and the fabricated device shows outstanding characteristics in extinction ratio, signal homogeneity, excess loss, and tolerance in the length of the splitter.     

Virtual fine delay line using one-stage inverter delay

A virtual fine delay line (VFDL) using only two ring oscillators and counters can cover a wide frequency operation range clock without adding any additional delay line stage. The proposed ring oscillator can easily make a unit delay as a one-stage inverter. The VFDL achieves fine resolution of less than 60 ps and small circuit area with two clock cycles lock-in time.     

互调干扰信号的特征识别

在复杂电磁信号环境中,实际存在为数不少的互调干扰信号,对这类信号的有效分析识别,是无线电监测工作需要重点关注解决的难题。对互调干扰信号在幅度特征和频谱峰值特征两个方面的特性进行了分析,给出了互调干扰信号识别的思路。     

Inside Front Cover: The Elastic Properties and Plastic Behavior of Two‐Dimensional Polymer Structures Fabricated by Laser Interference Lithography (Adv. Funct. Mater. 10/2006)

The probing of the micromechanical properties within a two‐dimensional polymer structure with sixfold symmetry fabricated via interference lithography reveals a nonuniform spatial distribution in the elastic modulus “imprinted” with an interference pattern in work reported by Tsukruk, Thomas, and co‐workers on p. 1324. The image prepared by M. Lemieux and T. Gorishnyy shows how the interference pattern is formed by three laser beams and is transferred to the solid polymer structure. The elastic and plastic properties within a two‐dimensional polymer (SU8) structure with sixfold symmetry fabricated via interference lithography are presented. There is a nonuniform spatial distribution in the elastic modulus, with a higher elastic modulus obtained for nodes (brightest regions in the laser interference pattern) and a lower elastic modulus for beams (darkest regions in the laser interference pattern) of the photopatterned films. We suggest that such a nonuniformity and unusual plastic behavior are related to the variable material properties “imprinted” by the interference pattern.     

A New Approach for Built‐in Self‐Test of 4.5 to 5.5 GHz Low‐Noise Amplifiers

This paper presents a low‐cost RF parameter estimation technique using a new RF built‐in self‐test (BIST) circuit and efficient DC measurement for 4.5 to 5.5 GHz low noise amplifiers (LNAs). The BIST circuit measures gain, noise figure, input impedance, and input return loss for an LNA. The BIST circuit is designed using 0.18 μm SiGe technology. The test technique utilizes input impedance matching and output DC voltage measurements. The technique is simple and inexpensive.     

An MPEG‐4 Compliant Interactive Multimedia Streaming Platform Using Overlay Networks

This paper presents a multimedia streaming platform for efficiently transmitting MPEG‐4 content over IP networks. The platform includes an MPEG‐4 compliant streaming server and client, supporting object‐based representation of multimedia scenes, interactivity, and advanced encoding profiles defined by the ISO standard. For scalability purposes, we employ an application‐layer multicast scheme for media transmission using overlay networks. The overlay network, governed by the central entity of the network distribution manager, is dynamically deployed according to a set of pre‐defined criteria. The overlay network supports both broadcast delivery and video‐on‐demand content. The multimedia streaming platform is standards‐compliant and utilizes widespread multimedia protocols such as MPEG‐4, real‐time transport protocol, real‐time transport control protocol, and real‐time streaming protocol. The design of the overlay network was architected with the goal of transparency to both the streaming server and the client. As a result, many commercial implementations that use industry‐standard protocols can be plugged into the architecture relatively painlessly and can enjoy the benefits of the platform.