Cure analysis of sheet molding compound in molds with substructures

The effects of material flow, heat transfer, part geometry, and curing agents on the cure of sheet molding compounds (SMC) in molds with substructures were analyzed both experimentally and numerically. It was found that heat transfer during mold filling has a profound effect on the cure pattern, especially for fastcure resins molded for parts with thin dimensions.     

In Situ TEM Observation of the Behavior of an Individual Fullerene-Like MoS<Subscript>2</Subscript> Nanoparticle in a Dynamic Contact

Inorganic fullerene-(IF)-like nanoparticles made of metal dichalcogenides (IF-MoS₂, IF-WS₂) have been known to be effective as anti-wear and friction modifier additives under boundary lubrication. The lubrication mechanism of these nanoparticles has been widely investigated in the past and even if the exfoliation and third body transfer of molecular sheets onto the asperities constitute the prevalent mechanism for the improved tribological behavior of IF nanoparticles, it has also been suggested that a rolling friction process could also play a role for well crystallized and spherical particles. In this study, in situ Transmission Electron Microscopy (TEM) observations of the behavior of single IF-MoS₂ nanoparticles were conducted using a sample holder that combines TEM and Atomic Force Microscopy (AFM) which simultaneously can apply normal and shear loads. It was shown that depending on the test conditions, either a rolling process or a sliding of the fullerenes could be possible. These in situ TEM observations are the first carried out with IF nanoparticles.     

Near-infrared responsive PbS-sensitized photovoltaic photodetectors fabricated by the spin-assisted successive ionic layer adsorption and reaction method

A PbS-sensitized photovoltaic photodetector responsive to near-infrared (NIR) light was fabricated by depositing monolayered PbS nanoparticles on a mesoporous TiO(2) (mp-TiO(2)) film via the spin-assisted successive ionic layer adsorption and reaction (SILAR) method. By adjusting the size and morphology of the PbS nanoparticles through repeated spin-assisted SILAR cycles, the PbS-sensitized photovoltaic photodetector achieved an external quantum efficiency of 9.3% at 1140 nm wavelength and could process signals up to 1 kHz.     

Optimal cluster-based routing scheme using node mobility in ad hoc networks

Ad hoc networks have a scalability problem. When the nodes of an ad hoc network increase in number or mobility, the amount of control traffic for routing increases and could cause traffic congestion. Cluster-based routing schemes have been proposed as a solution to this problem. Typical cluster-based ad hoc networks use a proactive routing scheme for intra-cluster routes and a reactive routing scheme for inter-cluster routes. In this study, we propose a new cluster-based routing scheme for ad hoc networks which makes use of the mobility of nodes. Nodes are divided into two groups on the basis of their mobility. For a route search within a cluster, a proactive routing scheme is used for low-mobility nodes and a flooding-based reactive routing scheme is used for high-mobility nodes. The required control traffic of the proposed scheme is analyzed and optimal parameters of the proposed scheme are derived from the analysis. The numerical results show that the proposed scheme produces far less control traffic than a typical cluster-based routing scheme.     

Holography and plasma oxidation for uniform nanoscale two dimensional channel formation of vertical organic field-effect transistors with suppressed gate leakage current

Vertical organic field-effect transistors (VOFETs) with nanoscale channel openings have been fabricated using pentacene as an active layer material. To achieve uniform nanoscale two-dimensional channel openings, a laser holography lithography has been introduced. Uniformly distributed and well-aligned holes with 250 nm diameter were successfully obtained with the laser holography lithography. VOFET devices with these channel openings have shown high on/off ratio of about 10³ without any further treatment. Gate leakage current was also decreased with an additional insulating layer generated on the gate electrode sidewall via plasma oxidation.     

A preliminary conceptual design study for Korean fusion DEMO reactor

As the ITER is being constructed, there is a growing anticipation for an earlier realization of fusion energy, so called fast-track approach. Korean strategy for fusion energy can be regarded as a fast-track approach and one special concept discussed in this paper is a two-stage development plan. At first, a steady-state Korean DEMO Reactor (K-DEMO) is designed not only to demonstrate a net electricity generation and a self-sustained tritium cycle, but also to be used as a component test facility. Then, at its second stage, a major upgrade is carried out by replacing in-vessel components in order to show a net electric generation on the order of 300 MWe and the competitiveness in cost of electricity (COE). The major radius is designed to be just below 6.5 m, considering practical engineering feasibilities. By using high performance Nb₃Sn-based superconducting cable currently available, high magnetic field at the plasma center above 8 T can be achieved. A design concept for TF magnets and radial builds for the K-DEMO considering a vertical maintenance scheme, are presented together with preliminary design parameters.     

A preliminary design and structural analysis of the lifting tools for 40° sector sub-assembly and handling ITER components

The purpose-built, ITER tokamak assembly tools, which are to be provided by Korea, should be designed to meet: the assembly plan, space reservations, safety standards, simple operations, efficient maintenance, and so on. It is very important that the ITER assembly tools are able to lift and transfer ITER components or their sub-assemblies to their assembled position safely. Furthermore, the lifting tools will lift and handle very heavy loads that can be more than 1200 tonnes sometimes. Therefore, the ITER lifting tools must be designed to endure these heavy load conditions with regard to their structural integrity. Also, these designs should be verified through an appropriate method. The preliminary design of the sector lifting tool and associated lifting attachments are introduced in this paper. The sector lifting tool was designed especially to lift and handle various ITER components by adjusting the lifting centre. The structural analysis results using ANSYS are described considering the heaviest load condition. The results of the analysis show that; all stresses applied on the lifting tool are lower than the allowable stress of the applied material.     

System analysis study for Korean fusion DEMO reactor

A conceptual design study for a steady-state Korean fusion DEMO reactor (K-DEMO) has been initiated. Two peculiar features need to be noted. First, the major radius is designed to be just below 6.5 m, considering practical engineering feasibilities. But still, high magnetic field at the plasma center around 8 T is expected to be achieved by using current state-of-the-art high performance Nb₃Sn strand technology. Second, a two-stage development plan is being considered. In the first stage, K-DEMO will demonstrate a net electricity generation but will also act as a component test facility. Then, after a major upgrade, K-DEMO is expected to show a net electric generation on the order of 300 MWe and the competitiveness in cost of electricity (COE). Feasibility of such a practical, near-future demonstration reactor is studied in this paper, based on a zero dimensional system analysis code study. It was shown that a net electric generation on the order of 300 MWe can be achieved below the optimistic β_N limit of 5. The elongation of K-DEMO is around 1.8 with single null configuration. Detailed optimization process and the resultant various plasma parameters are described.