Optimal cluster-based routing scheme using node mobility in ad hoc networks

Ad hoc networks have a scalability problem. When the nodes of an ad hoc network increase in number or mobility, the amount of control traffic for routing increases and could cause traffic congestion. Cluster-based routing schemes have been proposed as a solution to this problem. Typical cluster-based ad hoc networks use a proactive routing scheme for intra-cluster routes and a reactive routing scheme for inter-cluster routes. In this study, we propose a new cluster-based routing scheme for ad hoc networks which makes use of the mobility of nodes. Nodes are divided into two groups on the basis of their mobility. For a route search within a cluster, a proactive routing scheme is used for low-mobility nodes and a flooding-based reactive routing scheme is used for high-mobility nodes. The required control traffic of the proposed scheme is analyzed and optimal parameters of the proposed scheme are derived from the analysis. The numerical results show that the proposed scheme produces far less control traffic than a typical cluster-based routing scheme.     

Holography and plasma oxidation for uniform nanoscale two dimensional channel formation of vertical organic field-effect transistors with suppressed gate leakage current

Vertical organic field-effect transistors (VOFETs) with nanoscale channel openings have been fabricated using pentacene as an active layer material. To achieve uniform nanoscale two-dimensional channel openings, a laser holography lithography has been introduced. Uniformly distributed and well-aligned holes with 250 nm diameter were successfully obtained with the laser holography lithography. VOFET devices with these channel openings have shown high on/off ratio of about 10³ without any further treatment. Gate leakage current was also decreased with an additional insulating layer generated on the gate electrode sidewall via plasma oxidation.     

Photo‐Stable Organic Thin‐Film Transistor Utilizing a New Indolocarbazole Derivative for Image Pixel and Logic Applications

Small molecule pentacene layer has been a representative among many organic thin‐film transistor (OTFT) channels with decent p‐type mobilities, but it is certainly light‐sensitive due to its relatively small highest occupied molecular orbital‐lowest unoccupied molecular orbital (HOMO‐LUMO) gap (1.85 eV). Although a few other small molecule‐based layers have been reported later, their photo‐stabilities or related device applications have hardly been addressed. Here, a new photostable organic layer is reported, heptazole (C₂₆H₁₆N₂), which has almost the same HOMO level as that of pentacene but with a higher HOMO‐LUMO gap (≈2.95 eV). This heptazole OTFT displays a decent mobility comparable to that of conventional amorphous Si TFTs, showing good photostability unlike pentacene OTFTs. An image pixel driving the photostable heptazole OTFT connected to a pentacene/Al Schottky photodiode is demonstrated. This heptazole OTFT also conveniently forms a logic inverter coupled with a pentacene OTFT, sharing Au for source/drain.     

Characterization of CFRP Laminates’ layups using through-Transmitting ultrasound waves

Ultrasound waves interact strongly with the orientation and sequence of the plies in a layup when propagating in the thickness direction of composite laminates. Also the layup orientation greatly influences its properties in a composite laminate. If the layup orientation of a ply is misaligned, it could result in the part being rejected and discarded. Now, most researchers cut a small coupon from the waste edge and use a microscope to optically verify the ply sequences on important parts. This may add a substantial cost to the production since the test is both labor intensive and performed after the part is cured. A nondestructive technique would be very beneficial, which could be used to test the part after curing and requires less time than the optical test. Therefore we have developed, reduced, and implemented a novel ply-by-ply vector decomposition model for composite laminates fabricated from unidirectional plies. This model decomposes the transmission of a linearly polarized ultrasound wave into orthogonal components through each ply of a laminate. High probability is found, by comparisons between the model and tests, in characterizing cured layups of the laminates by using the proposed method.     

Computer-Aided Performance Evaluation of a Multichannel Transcranial Magnetic Stimulation System

We have evaluated a multichannel transcranial magnetic stimulation (TMS) system using realistic simulations based on the boundary element method (BEM). We investigated various configurations and types of stimulation coils by means of quantitative measures such as targeting accuracy and field concentration. The simulation studies applied to four different head-brain models suggest improved coil types yielding enhanced targeting accuracy and concentrated evoked electric field distribution     

A Direction‐Based Vascular Pattern Extraction Algorithm for Hand Vascular Pattern Verification

This paper proposes an improved vascular pattern extraction algorithm for person verification applications. The proposed direction‐based vascular pattern extraction (DBVPE) algorithm is based on the directional information of vascular patterns. It applies two different filters to the input images: row vascular pattern extraction filter (RVPEF) for effective extraction of the abscissa vascular patterns and column vascular pattern extraction filter (CVPEF) for effective extraction of the ordinate vascular patterns. We use the combined output of both filters to obtain the final hand vascular patterns. Unlike the conventional hand vascular pattern extraction algorithm, the directional extraction approach prevents loss of the vascular pattern connectivity. To validate the DBVPE algorithm, we used a prototype system with a DSP processor. The prototype system shows approximately a three‐times better false acceptance rate (FAR) than the conventional single filter algorithm.     

Amino acids in maturation medium and presence of cumulus cells at fertilization promote male pronuclear formation in porcine oocytes matured and penetrated in vitro

The present study was conducted to examine the ability of porcine oocytes to achieve male pronuclear (MPN) formation when they are matured and penetrated in vitro under various culture conditions. When cumulus-enclosed oocytes were cultured for 24-48 h in modified Whitten's medium (pH 7.4) supplemented with 10% porcine follicular fluid, 10 IU eCG/ml, and 10 IU hCG/ml (designated mWM-FG), nuclear maturation of oocytes reaching metaphase II was completed by 36 h after the start of culture. However, there were no differences in the proportions (94-95%) of oocytes penetrated in vitro by cryopreserved ejaculated spermatozoa or in the rates (35-45%) of MPN formation between oocytes cultured for 36 and 48 h. When cumulus-enclosed oocytes were cultured for 36 h in mWM-FG supplemented with 2% (v:v) minimal essential medium (MEM) essential amino acids (EAA) with the addition of 0.1 mM glutamine and/or 1% (v:v) MEM nonessential amino acids (NEAA) and inseminated in vitro, 93-97% of oocytes were penetrated regardless of the presence of amino acids during maturation, but the rates of MPN formation were higher in the presence (79-84%) than in the absence (51%) of any amino acids. The addition of EAA+NEAA and/or 0.57 mM cysteine to mWM-FG also did not affect sperm penetration in vitro, while it promoted MPN formation (76-83%) in penetrated oocytes as compared with those matured in the absence of amino acids and cysteine (53%). When oocytes were freed from cumulus cells after culture in mWM-FG, sperm penetration rates were not different between cumulus-enclosed (100%) and cumulus-free (92%) oocytes, but the rate of MPN formation was higher in cumulus-enclosed (53%) than in cumulus-free (28%) oocytes. When EAA+NEAA+cysteine was added to mWM-FG, MPN formation was not improved in cumulus-free oocytes but was much improved (78%) in cumulus-enclosed oocytes. These results indicate that MPN formation in porcine oocytes is promoted by the addition of amino acids and/or cysteine in simple maturation medium and by the presence of cumulus cells at fertilization in vitro.     

Isolation, cloning and characterisation of the abiI gene from Lactococcus lactis subsp. lactis M138 encoding abortive phage infection

Morphological and morphometric features of the cornea of 13 species of primates have been studied in order to determine possible morphological differences between them. The existence of relationships between different morphometric corneal variables was also examined to establish which variables best defined and characterized the cornea. The present aim is to determine which primate cornea resembles that of the human being most with a view to possible future clinical and experimental studies. The results obtained revealed that all the cornea under study presented similar morphological features. The relationship between total corneal thickness and corneal epithelial thickness was determined as well as the relationship between epithelial thickness, the number of epithelial layers and the number of epithelial cells. However, the morphological pattern of Bowman's membrane and corneal endothelium differed in the species studied. Finally, the study indicates that the chimpanzee and the gorilla are the species with a corneal morphometry which is closest to that of the human cornea.     

Remeshing for metal forming simulations—Part I: Two‐dimensional quadrilateral remeshing

In this paper, a general framework of practical two‐dimensional quadrilateral remeshing, which includes the determination of remeshing time, automatic quadrilateral mesh generation, and data transfer process, will be formulated. In particular, the current work contains new algorithms of mesh density specification according to the distribution of effective strain‐rate gradients, mesh density smoothing by fast Fourier transform (FFT) and low‐pass filtering techniques, coarsening it by node placement scheme, and a modified Laplacian mesh smoothing technique. The efficiency of the developed remeshing scheme was tested through three practical two‐dimensional metal forming simulations. The results clearly indicate that the algorithms proposed in this study make it possible to simulate two‐dimensional metal forming problems efficiently and automatically. Copyright © 2002 John Wiley & Sons, Ltd.