Time-slide window join over data streams

The join is an important operator in processing data streams. To produce outputs continuously over unbounded data streams, sliding windows are generally used to limit the scope of the join at a certain time. In the existing join algorithms, only a simple type of windows have been considered, which are updated whenever a new data item arrives on any input stream. On the other hand, a more common type of windows have not been addressed yet, whose intervals are updated periodically, i.e., slid by a predefined time interval. In this paper, we consider the time-slide windows in joining multiple data streams. The algorithm for the time-slide window join can vary according to (i) how frequently the join is evaluated and (ii) which structure is used for windowing. Regarding this, possible algorithms are discussed, and experimental results that compare their performances are provided in this paper.     

PC-DCS关键技术研究

结合一个工控系统实例，介绍了一种PC－DCS系统数据刷新频率的方法，提出从使用智能通信卡，多串口通信，通信数据组织，以及测控仪表选型等全方位着手提高系统通信实时性的新思路。     

PPESK／PS共混物流变性能的研究

以溶液共沉淀的方法制备了含二氮杂萘联本结构的聚芳醚砜酮（PPESK）。聚苯乙烯（PS）共混物，用毛细管流变仪测定了共混物的流为性能。结果表明，在本实验条件下，PPESK／PS共混物熔体属假塑性非牛顿汉体，其熔体粘度随PS含量的增加、温度的升高、剪切速率的增大而下降。PS的加入有利于改善PPESK的熔融加工流动性。     

金属膦配位化合物在不对称催化反应中的应用

本文分别介绍了不对称催化合成技术及作为手性催化剂的金属膦配位化合物，并且简要综述金属膦配位化合物的研究与应用进展。     

开放式热风穿流干燥蔬菜降低能耗的研究进展

开放式热风干燥（AD）工艺以其设备成本低、操作和维修简单等特点，在国内大批量脱水蔬菜生产中仍占有较高的比例。但开放式AD蔬菜的能耗高，故对其进行节能技术研究是项急需而有意义的。我们可以从AD工艺前处理、AD和其它干燥方法联合、干燥系统改进、余热回收以及工艺参数再优化等5个方面来降低AD蔬菜生产中的能耗。     

PVC芯层发泡管的研制

PVC芯层发泡管除具备实壁管的性能外,还具有抗冲强度高、适用温度变化大、建筑下水隔音等优点,并且节省原材料25％～30％。通过试验确定了生产工艺要点。产品质量达到或超过了等效采用美国ASTM F891同类产品标准的企业标准。     

基于环境选择和配对选择的多目标粒子群算法

为了使多目标粒子群算法中种群粒子能够快速地收敛于怕累托最优边界,针对标准多目标粒子群算法中缺乏粒子评价标准以及种群个体历史最优值位置和全局最优值位置选择问题,提出了一种基于环境选择和配对选择策略的多目标粒子群算法.该算法在每次迭代时,采用SPEA2中的环境选择和配对选择策略及适应度值计算方法,以此来提高种群粒子之间的信息交换力度,减少标准多目标粒子群算法中大量的随机性,使种群粒子能够更快速地收敛于怕累托最优边界.经典测试函数的仿真实验结果表明,在标准多目标粒子群算法中运用SPEA2的环境选择、配对选择策略和适应度值计算方法,能够使种群粒子更快速地收敛于帕累托最优边界,验证了算法改进的可行性和有效性.     

一种多接口多信道VANET动态信道分配算法研究

为了合理地实现多接口多信道车载自组织网络（VANET）车辆节点间通信信道的动态分配,提出了一种基于通信双方车辆节点信道切换队列的动态信道分配算法。定义了车辆节点的射频接口状态,给出了信道的性能因子以及信道切换队列的生成方法,通过综合考虑通信双方车辆节点的射频接口状态和信道切换队列,快速自主地建立通信链路,从而解决了信道公平接入和分配不合理的问题。通过软件仿真比较可以看出,该算法实现了信道的动态分配,减小了平均端到端时延,增加了网络平均吞吐量,显著提高了多接口多信道VANET的网络性能。     

Flaw-Tolerance and R-Curve Behavior of Liquid-Phase-Sintered Silicon Carbides with Different Microstructures

β-SiC powder containing 6 wt% A1₂O₃ and 4 wt% Y₂O₃ as sintering additives was pressureless sintered at 2000°C for 1 h (AYE-SiC) and 3 h (AYP-SiC). AYE-SiC consisted of an equiaxed grain structure and AYP-SiC exhibited a micro-structure with platelike grains as a result of grain growth related to β→α phase transformation during sintering, R -curve behavior and flaw tolerance for these silicon carbides were evaluated by the indentation-strength technique. For comparison, the R -curve behavior of conventional sintered, boron- and carbon-doped SiC (SS-SiC) was evaluated. AYE-SiC and AYP-SiC exhibited rising R -curve behavior with toughening exponents of m = 0.042 and m = 0.135, respectively. AYP-SiC exhibited better flaw tolerance and more sharply rising R -curve behavior than AYE-SiC. The more sharply rising R -curve behavior and the better flaw tolerance of AYP-SiC were attributed mainly to grain bridging of crack faces by platelike grains. Because of the high degree of transgranular fracture, SS-SiC exhibited a flat R -curve despite a microstructural feature with platelike grains.