IsoGeometric analysis using T-splines on two-patch geometries

We develop optimal approximation estimates for T-splines in the case of geometries obtained by gluing two standard tensor product patches. We derive results both for the T-spline space in the parametric domain and the mapped T-NURBS in the physical one. A set of numerical tests in complete accordance with the theoretical developments is also presented.     

Preparation of bao-pbo-nd2o3-tio2 powders by hydrothermal synthesis

Homogeneous and nano-sized BPNT [(Ba_1-xPb_x)Nd₂Ti₅O₁₄] powders were prepared under various hydrothermal conditions. Crystallinity and homogeneity of the synthetic powders were investigated. The microwave dielectric properties of the filters prepared with hydrothermal powders were compared with those of the filters prepared with conventional powders. The microwave dielectric properties of the filter prepared with the hydrothermal powders were also better than those of the filter manufactured with the conventional powders. The dielectric constant, quality constant and temperature coefficient of resonance frequency of hydrothermally prepared filter under optimum condition and measured at 3.5 GHz around were about 93, 6067 and 0 ppm/°C, respectively.     

Improvement in the volume efficiency of multilayered ceramic capacitors (MLCCs)

An attempt was made to improve the conventional lamination process in the multilayered ceramic capacitors (MLCCs) fabrication by adapting a solvent treatment on the BaTiO₃ green sheets. During the lamination process, additional particle rearrangement in the BaTiO₃ green block was stimulated by solvent treatment. This rearrangement resulted in a more compact structure of the BaTiO₃ green sheets compared to that obtained through the conventional lamination process. The overall thickness of BaTiO₃/Ni/BaTiO₃ laminates was also reduced after solvent treatment. It is suggested that miniaturization in the fabrication of MLCCs can be improved by adapting a solvent treatment during the lamination process.     

Preparation of SnO2 whiskers via the decomposition of tin oxalate

A new method for preparing SnO₂ whiskers by the decomposition of SnC₂O₄ is suggested. A Whisker-like morphology of a SnC₂O₄ precipitate was attained via the gradual addition of an oxalic acid solution to a hot SnCl₂ aqueous solution (T > 50^∘C). In comparison, when the solution temperature was either lower than 50^∘C or when ethanol was used as the solvent, the SnC₂O₄ precipitate showed an angular and relatively isotropic morphology. The morphology of the SnC₂O₄ precipitate remained even after its thermal decomposition into SnO₂ at 400^∘C indicating that SnC₂O₄ precipitation is a key step in preparing the whiskers. The formation mechanism of SnO₂ whiskers was explained by the supersaturation during the precipitation of SnC₂O₄.     

Baseband derived RF digital predistortion

A unique baseband derived RF predistortion system which uses lookup table coefficients extracted at baseband that directly RF envelope modulate a quadrature vector modulator is presented. The primary advantages of this architecture are that it combines the narrowband advantage of envelope predistortion with the accuracy of baseband predistortion.     

A miniature UWB planar monopole antenna with 5-GHz band-rejection filter and the time-domain characteristics

A planar monopole antenna with a staircase shape and small volume (25/spl times/26/spl times/1 mm/sup 3/) is proposed in this paper. With the use of a half-bowtie radiating element, the staircase-shape, and a modified ground plane structure, the proposed antenna has a very wide impedance bandwidth measured at about 11.6 GHz (2.9-14.5 GHz, bandwidth ratio about 1:5) below VSWR 2 including the WLAN band notched in the vicinity of 5 GHz. An omnidirectional radiation pattern is obtained. The group delay which is an indication of linearity between two proposed antennas is less than 1 ns. The electrical characteristics in terms of frequency and time domains and physical ones of the proposed antenna make it attractive for use in ultrawideband (UWB) systems.     

Process Modeling for Precision Forming of Discrete Parts – State of the Technology and Critical Issues

This paper presents an overview on the application of FE simulation as a virtual manufacturing tool in designing manufacturing processes for precision parts. The processes discussed include forging, sheet metal forming and hydroforming. Determination of reliable input parameters to simulate a process is a key element in successful application of process simulation for process design in all the mentioned areas. These issues are discussed in detail. Practical examples of application of FE simulation are presented for improvement of the existing metal forming process and/or designing new metal forming process for manufacturing discrete precision parts in forging, sheet metal forming and hydroforming.     

Effect of Hot Band Annealing on Magnetic Properties in 3% Si Grain‐oriented Electrical Steels

Hot band annealing is known to be a prerequisite for good magnetic properties irrespective of manufacturing methods in grain‐oriented Fe‐3 wt.% Si electrical steels. In this study, the effects of hot band annealing on magnetic properties were investigated in 3% grain‐oriented electrical steels of low soluble AI contents and one‐stage cold rolling. Microstructure and precipitate distribution were compared with hot band annealing conditions. Secondary recrystallization behaviour with hot band annealing condition was also discussed.     

In Vitro hydrodynamic evaluation of prosthetic polymer heart valves in steady flow

Hydrodynamic comparison of two polymer valves with two mechanical valves is presented. The valves were perfused in a steady flow system, and comparisons between the valves were made on the transvalvular pressure distribution and drop, opening area, and leakage volume. Particular emphasis was placed on a slit-type bileaflet polymer valve which was newly designed and fabricated in our research group. The results showed that the functional characteristics of a slit-type bileaflet polymer valve compared favorably with that of mechanical valves. This valve may be a viable and inexpensive alternative, especially for short-term use in TAH or VAD systems.     

Ultra-precision lapping of machinable ceramic Si3N4-BN by in-process electrolytic dressing

The machinable ceramic Si₃N₄-BN is a material which is increasingly being employed for automobile bearings and machinable ceramics. This material is very hard and has high resistance against volatile temperature and wear. It's efficient quality and accurate surfaces have always been of high demand for many applications in the industrial field. Besides, this material is varied by the percentage of BN contained in it, and the characteristics of lapping also varies according to this percentage of BN. Hence, in-process electrolytic dressing for ultra-precision lapping was introduced and used to experiment with the differing BN percentages in machinable ceramic Si₃ N₄. Metal-bonded super-abrasive diamond lapping wheels have superior qualities such as high bond strength, high stability and high machinability. The major problems encountered are wheel loading and glazing, which impedes the effectiveness of the cast-iron bonded diamond lapping wheel and, therefore, dressing should be considered. In this respect, in-process electrolytic dressing (IED) is proposed as an effective method regarding continuous protruding abrasives on the surface of wheels, whereby loading and glazing phenomena can apparently disappear. In this paper, the machining characteristics of machinable ceramic Si₃N₄-BN have been studied by adapting the IED lapping process in terms of the percentage of h-BN material.