Imaging dynamics of charge-auto-organisation in glass capillaries

Multiply charged ion beam transmission through insulating capillaries is today a very active field of research. Thanks to the work of several groups during the last five years, several features of this unexpected process have been evidenced. The open challenge is to understand and control the self-organized charging-up of the capillary walls, which leads finally to the ion transmission. Up to now, the specific charge distribution on the inner surface, as well as the dynamics of the build-up, are still to be understood. While capillaries usually studied are microscopic pore networks etched in different materials, our concern is in macroscopic single capillaries made of glass. With a length of several centimeters and a diameter of a few micrometers at the exit, these capillaries have nevertheless the same aspect ratio as the etched pores (length/diameter ≈ 100). One of the leading goals of this research on single capillaries is to produce multi-charged ion beams with diameters smaller than a micrometer (nano-beams). These glass capillaries offer the opportunity to be used as an ion funnel due to their amazing properties of guiding and focusing highly charged ion beams without altering neither their initial charge state nor the beam emittance (<10⁻³ π mm mrad). However, the understanding of the underlying process is not complete and relies on models assuming charge patches distributed along the capillary and which still need to be tested. We present the first observation imaging the dynamics of the charging-up process in single glass capillaries. During the build-up of the self-organized charge deposition on the capillary walls, the 230 keV Xe²³⁺ transmitted beam is deflected back and forth several times as the outgoing current increases. This is in agreement with the picture of charge patches created sequentially along the capillary and thus deflecting the beam until a stationary state is reached.     

Effects of EDTA saturated with Ca2+ (Ca-EDTA) on pig,bovine and mouse oocytes at the germinal vesicle stage during maturation culture and the involvement of chelation of Zn2+ in pronuclear formation induction by Ca-EDTA

EDTA saturated with Ca(2+), Fe(3+) or Cu(2+) can induce parthenogenetic activation of pig oocytes at the germinal vesicle stage, whereas EDTA saturated with Zn(2+), which is unable to chelate Zn(2+), does not, indicating that chelation of Zn(2+) with EDTA saturated with Ca(2+) (Ca-EDTA) in maturing pig oocytes plays a pivotal role in the induction of parthenogenetic activation of oocytes. In the present study, the involvement of Zn(2+) chelation in the induction of parthenogenetic activation of pig oocytes at the germinal vesicle stage was confirmed first by examining the effects of concomitant addition of Zn(2+), Cu(2+) or Ni(2+) at various concentrations together with 1 mmol Ca-EDTA l(-1) to the maturation medium. The titration experiments revealed that the pronuclear formation induced by 1 mmol Ca-EDTA l(-1) was completely inhibited by the addition of > 30 micromol Zn(2+) l(-1) to the medium, but not by the addition of Cu(2+) and Ni(2+) at any concentration examined. Second, bovine and mouse oocytes at the germinal vesicle stage were cultured in medium with or without 1 mmol Ca-EDTA l(-1) for 48 h to examine the effects of Ca-EDTA treatment on these oocytes during maturation culture. Most (70-86%) of the bovine oocytes that underwent germinal vesicle breakdown matured to the MII stage via the MI phase, regardless of whether Ca-EDTA was present for the first 24 h of culture. However, 61% of oocytes that had been cultured with Ca-EDTA for 48 h formed a pronucleus without a second polar body, whereas oocytes cultured in the absence of Ca-EDTA were not observed to form a pronucleus at any time during culture. However, even when mouse oocytes at the germinal vesicle stage were cultured for up to 48 h in maturation medium containing Ca-EDTA, pronuclear formation was not observed. Finally, when bovine oocytes that had been cultured with 1 mmol Ca-EDTA l(-1) for 48 h from the germinal vesicle stage were cultured further in medium without Ca-EDTA that was supplemented with 5% fetal calf serum, only 26% of the oocytes developed to the cleaved stage, and none could develop further.     

Molecular structures of gellan gum imaged with atomic force microscopy (AFM) in relation to the rheological behavior in aqueous systems in the presence of sodium chloride

Aqueous solutions of gellan gum with comparable molecular mass but with different acyl contents were investigated by atomic force microscopy and rheological measurements in the presence of sodium chloride (NaCl). Results obtained were discussed in relation to our previous report using potassium chloride (KCl) as an added salt. For a low-acyl sample, continuous fibrous network structures were identified microscopically as in the case of KCl. The network structures were more heterogeneous than those formed with KCl in terms of the height distribution of molecular assemblies. Rheological thermal hysteresis between sol–gel transitions was detected as in the case of KCl. The storage modulus (G′) of the gelled system was ca. 15% of the corresponding data with KCl at 20 °C. For a high-acyl sample, no continuous network structures were identified but branches with observable ends were identified as in the case of KCl. The hysteresis was less evident than the corresponding data with KCl and for the low-acyl sample with NaCl. Also, G′ values at 20 °C were ca. 30% and 20% of the corresponding data with KCl and for the low-acyl sample with NaCl, respectively. Continuousness and homogeneity of network structures related to the hysteresis and elasticity of the system, respectively.     

Cloning and characterization of a β-N-acetylglucosaminidase (BmFDL) from silkworm Bombyx mori

In insects, β-N-acetylglucosaminidase (GlcNAcase) participates in critical physiological processes such as fertilization, metamorphosis, and glycoconjugate degradation. Insects produce glycoproteins carrying paucimannosidic-type N-glycans, the terminal GlcNAc residue of which is cleaved by a GlcNAc-linkage specific GlcNAcase, also known as the fused lobes (FDL) protein. To obtain information on the structure of GlcNAcases and insight into their contribution to physiological processes, we cloned Bombyx mori FDL (BmFDL) from silkworm larvae. The full-length cDNA (1.9 kb) encoded a protein of 633 amino acids with 42% amino acid sequence identity to Drosophila melanogaster FDL (DmFDL). Recombinant BmFDL cleaved only β-1,2-linked GlcNAc residues from the α-1,3 branch of biantennary N-glycan. This substrate specificity was similar to that of DmFDL. Microsomal FDL activity was inhibited by anti-BmFDL antibodies. Taken together, our results suggest that BmFDL is a N-glycan-processing GlcNAcase in B. mori.     

Effects of α-tocopherol level in raw venison on lipid oxidation and volatiles during storage

Relationships between α-tocopherol concentration in the muscle and development of lipid oxidation or volatiles in raw venison were studied. Fourteen Japanese Shika Deer (Cervus nippon) were fed various amounts (0–3.0 g of α-tocopheryl acetate per animal) during the different periods (0–37 days) and then M. longissimus thoracium et lumborum (LD muscles) with a range of α-tocopherol concentrations (4.1–15.1 mg/kg tissue) were obtained. For stabilizing the lipid during storage for 11 days under air, over ca. 9 mg of α-tocopherol per kg tissue were required based on levels of 2-thiobarbituric acid reacting substances (TBARS) numbers. Nine compounds were identified in headspace volatiles, and one of the volatiles was hexanal which has been recognized as off-flavour component. For depressing the hexanal evolution, at least ca. 9 mg of α-tocopherol per kg tissue were also required for 11 days’ storage. This value was much higher than other species. The reasons for higher requirement of α-tocopherol were possibly due to the higher concentration of unsaturated fatty acid and myoglobin in venison.     

The modification of ABS resin by introducing metal salts of unsaturated acids

Graft polymerization of methacrylic acid onto ABS resin was carried out using BPO as an initiator in THF solution. Degree of grafting increased with reaction time and reached 35% in 10 hrs. Carboxyl groups were converted to carboxylates (metal salts) by refluxing MAA-g-ABS and the metal acetate in THF. In the solid graft polymers in solid, the infrared absorption of the asymmetrical C= O vibration of the carboxylic acid shifted to lower wavenumbers with increasing metal ion concentration. The absorption peak for the carboxylate anion is shifted to higher wavenumbers with the increase of alkali metal ion concentration, however, for the Mg²⁺ salt, it is shifted to lower wavenumbers. The surface and volume resistivities of the K⁺ and Na⁺ salts of MAA-g-ABS were 9.0 × 10⁹ and 9.5 × 10⁹ at 80% neutralization, respectively, and decreased with alkali metal ion concentration. The electric resistance of Li⁺, Mg²⁺ and Zn²⁺ salts decreased only slightly. The modulus of the K⁺ salt of MAA-g-ABS decreased with neutralization, whereas in Li⁺, Mg²⁺ and Zn²⁺ salts, the modulus increased with increasing metal ion concentration.     

Alleviation of the two-cell block of ICR mouse embryos by polyaminocarboxylate metal chelators

The present study was undertaken to examine the effects of various transition metal ion chelators, both polyaminocarboxylates (including nitrilotriacetate (NTA), ethylenediaminediacetate (EDDA), ethyleneglycolbistetraacetate (EGTA), ethylenediaminetetraacetate (EDTA) and diethylenetriaminepentaacetate (DTPA)) and non-polyaminocarboxylates (dipicolinic acid and deferoxamine), on the development in vitro of one-cell ICR strain mouse embryos to the four-cell and blastocyst stages. The order of stability constants of polyaminocarboxylates for transition metal ions such as zinc, copper and iron is as follows: NTA < or = EDDA < EGTA < EDTA < DTPA. Addition of 10 or 100 micromol polyaminocarboxylates x l(-1) to the medium significantly enhanced the development of most one-cell embryos (66-88%) beyond the two-cell stage compared with that (< 25%) in medium without polyaminocarboxylates. Although EDDA, EDTA and DTPA at 10 micromol x l(-1) induced the development of most one-cell embryos to the four-cell stage and beyond, a higher concentration (100 micromol x l(-1)) of NTA and EGTA was required to obtain a similar result. Therefore, the ability of polyaminocarboxylates to overcome the two-cell block is not correlated with their potency to chelate transition metal ions. In contrast, the non-polyaminocarboxylates dipicolinic acid and deferoxamine, at 10 and 100 micromol x l(-1), did not have the same effect. Taken together, the results indicate that the ability of polyaminocarboxylates to overcome the two-cell block in embryo development is due to some common feature or features other than the ability to chelate transition metal ions.     

Effect of anisotropic scattering in neutronics analysis of BWR assembly

The anisotropic scattering effect to keff is studied for UO₂ and MOX fueled BWR assemblies. The anisotropic scattering effect increases the assembly k_∞ by 0.44% Δk for the UO₂ assembly with 0% void fraction, and by 0.21% Δk for the MOX assembly with 0% void fraction. This is because the anisotropic scattering effect flattens the intra-assembly thermal flux, and the absorption rate in the surrounding water gap is decreased, but the absorption rates in the MOX fuel rods are increased compared to the UO₂ rods. Therefore, the total decrease in absorption rates in the UO₂ assembly is relatively large, and the k_∞ is increased in the UO₂ assembly. The dependence of the anisotropic scattering effect on the void fraction is investigated, and the significant difference of 0.62% Δk/k is found for the 0% and the 80% void fractions. The BWR assemblies with Gd rods are also considered. Furthermore, the usefulness of the transport cross section is investigated, and it is found that the transport cross section gives reasonable anisotropic scattering effect, though not satisfactory.     

Effects of kernel function on Nu support vector machines in extreme cases

How we should choose a kernel function in support vector machines (SVMs), is an important but difficult problem. In this paper, we discuss the properties of the solution of the /spl nu/-SVM's, a variation of SVM's, for normalized feature vectors in two extreme cases: All feature vectors are almost orthogonal and all feature vectors are almost the same. In the former case, the solution of the /spl nu/-SVM is nearly the center of gravity of the examples given while the solution is approximated to that of the /spl nu/-SVM with the linear kernel in the latter case. Although extreme kernels are not employed in practice, analyzes are helpful to understand the effects of a kernel function on the generalization performance.