Reduction of solid content in starch industry wastewater by microfiltration

Wastewater obtained in the production process of wheat starch and vital wheat gluten was treated by microfiltration through a ceramic tubular membrane with 200 nm pore sizes. The consumption of process water would thus be reduced, the starch would be recovered to a greater extent and the wastewater problem would consequently be solved. Reduction of the occurrence of polarization layer on the membrane and the constant wastewater permeate flux through the membrane was maintained by inserting of the mixer Kenics inside the membrane tube. The maximum value of the permeate flux (24 L m⁻² h⁻¹) without the use of a static mixer was achieved at 3 × 10⁻⁵ Pa and at a flow rate of 150 L/h, for wastewater samples initially allowed to settle for 4 h prior microfiltration. Under the very same conditions of the working parameters, the use of a static mixer enables a flux that is up to two or three times more intensive compared to the values obtained without using a mixer. Microfiltration reduces the wastewater dry matter from 11 000 to 4000 mg/L, lessens the chemical oxygen demand by 74%, i.e. from 21 000 to 5100 mgO₂/L and significantly decreases the values of the suspended matter, namely from 9000 to 300 mg/L.     

Ion bombardment induced surface electrical degradation monitoring by means of luminescence in aluminas

Oxide ceramics for use as electrical insulators in future fusion devices, will be exposed to ionization and displacement damage (neutrons, gammas, ion bombardment). Enhanced oxygen loss due to ion bombardment increases surface electrical conductivity, and at the same time the surface emits light due to ion beam induced luminescence (IBIL). Results for 3 types of α-alumina and sapphire measuring electrical surface conductivity and IBIL as a function of dose at different temperatures between 20 and 200 °C, show a clear correlation between luminescence and surface electrical degradation. This indicates the potential to remotely monitor insulating material degradation not only in ITER and beyond, but also in the more immediate in-reactor experiments required for materials testing. Partial reduction of degradation by heating in air suggests the possibility for in situ recovery of the insulating properties.     

Uncertainty analysis based on sensitivity applied to angle-ply composite structures

This article describes a finite element-based formulation for the statistical analysis of the response of stochastic structural composite systems whose material properties are described by random fields. A first-order technique is used to obtain the second-order statistics for the structural response considering means and variances of the displacement and stress fields of plate or shell composite structures. Propagation of uncertainties depends on sensitivities taken as measurement of variation effects. The adjoint variable method is used to obtain the sensitivity matrix. This method is appropriated for composite structures due to the large number of random input parameters. Dominant effects on the stochastic characteristics are studied analyzing the influence of different random parameters. In particular, a study of the anisotropy influence on uncertainties propagation of angle-ply composites is carried out based on the proposed approach.     

Crystallization study of chemically vapour-deposited amorphous silicon films by in situ x-ray diffraction

The solid phase crystallization kinetics of chemically vapour-deposited amorphous silicon films were studied by in situ X-ray diffraction. We determined the crystalline volume directly from the Bragg peak intensities at various times during isothermal annealing in the temperature range 578 °C < T < 658 °C. From these experiments we deduced that the crystallization was due to nucleation predominantly at the substrate-film interface followed by crystal growth perpendicular to this interface. The crystal growth rate was thermally activated with an activation energy E_v of 3.1 eV. A strong 〈111〉 preferred orientation of the growing polycrystal was observed and the grain size remained constant at about 60 nm. Evidence of stresses at the amorphous-crystalline interface during the early stages of crystallization was observed. A comparison with previous conductivity measurements is also carried out.     

FEM analysis in high speed machining of aluminium alloy (Al7075-0) using polycrystalline diamond (PCD) and cemented carbide (K10) cutting tools

The purpose of this paper is to study the thermal and mechanical behaviour in machining of aluminium alloys (Al 7075-0) using PCD (polycrystalline diamond) and K10 (cemented carbide) tools and to make a comparison between the performances of both tools. The study was made using a commercial finite element software. This software has a user friendly interface and can output several results including cutting forces, temperature, pressure, von Mises stress, maximum shear stress, plastic strain, and plastic strain rate which were the objectives of this study. By analysing the simulations, it was concluded that the polycrystalline tool has a superior performance in terms of cutting and feed forces and temperature when compared to the cemented carbide tool.     

Hot turning of a difficult-to-machine steel (sae xev-f) aided by infrared radiation

This paper discusses how to improve the position precision of a semi-closed loop servo system. A support vector regression algorithm is chosen to model and predict position error. The predicted error is then fed back to the input entry to compensate the error. Fuzzy PID control is introduced to adjust the controlling rule of the PID controller in the semi-closed loop servo system so as to improve the dynamic response characteristics of the servo system and reach a high degree of position precision. A case study is implemented. The simulation and experimental results show that combining the improved fuzzy control with predicted position error feedback ensures a high degree of position precision and a high degree of dynamic response characteristics.     

Electromagnetic compatibility aspects of active robotic systems for surgery: the robotic prostatectomy experience

This case describes ventricular proarrhythmia as a result of a synchronized internal atrial defibrillation shock in a 29-year-old man with Ebstein's anomaly referred for radiofrequency ablation of a right posterior accessory pathway. During the electrophysiologic study, atrial fibrillation was induced and 3/3 msec shocks of various strengths were delivered between two decapolar defibrillation catheters in the coronary sinus and right atrial appendage. A 2.0-J biphasic shock synchronized to an R wave after a short-long-short ventricular cycle length pattern with a preshock coupling interval of 245 msec induced ventricular fibrillation, which was externally defibrillated with 200 J. This observation has implications for the development of implantable atrial defibrillators.     

Run-time generation of partial FPGA configurations

This paper presents and evaluates a method of generating partial bitstreams at run-time for dynamic reconfiguration of sections of an FPGA. The method is intended for use in adaptive embedded systems that employ run-time reconfiguration to achieve high flexibility and performance. The proposed approach combines partial bitstreams of coarse-grained components to produce a new partial bitstream implementing a given circuit netlist. Topological sorting of the netlist is used to determine the initial positions of individual components, whose placement is then improved by simulated annealing. Connection routing is done by a breadth-first search of the reconfigurable area based on a simplified resource model of the reconfigurable fabric. The desired partial bitstream is constructed by merging together the default bitstream of the reconfigurable area, the relocated partial bitstreams of the components, and the configurations of the switch matrices used for routing. The approach is embodied in a code library that applications can use to create new bitstreams at run-time. For the members of a set of 29 benchmarks (both synthetic and application-derived) having between five and 41 components, the complete process of bitstream generation takes between 8 s and 35 s when running on an embedded PowerPC 405 microprocessor clocked at 300 MHz.     

Structure of the cokes obtained from the group components separated from coking coal vitrites by selective thermosolvolysis

The examination of the structure of cokes obtained from extracts separated from preheated vitrites of coking coals by progressive and continuous extraction with chloroform was carried out. The structural ordering (interplanar spacing and crystallite dimensions) of the cokes depends on the rank of the parent vitrites but it does not depend on the degree of extraction. The occurrence of optical anisotropy in cokes from the extracts is connected with both the rank of the parent vitrite and the degree of extraction. In the formation of the optical anisotropic structure during the carbonization of coking coal vitrites, the part of the extract which is of small size, which partially undergoes decomposition, is an important factor.