Hydrogen production by propylene-assisted decomposition of methane over activated carbon catalysts

Catalytic decomposition of methane (CDM) permits obtaining hydrogen in high yields and – what is essential – it does not lead to release of CO₂. Unfortunately, most of the catalysts used in this process undergo fast deactivation. Their possible regeneration, consisting in the removal of pore blocking carbonaceous deposit of low catalytic activity, leads to generation of undesirable carbon dioxide. An alternative solution for maintaining high catalyst activity in the CDM reaction can be generation of the catalytically active carbonaceous deposit on its surface. Such a deposit can be obtained by decomposition of different organic substances. This paper reports on methane decomposition carried out in the presence of propylene (used in the concentration of 10 or 20%). The reaction was performed at three temperatures of 750 °C, 850 °C or 950 °C. Three types of activated carbon were tested as catalysts: the first one was obtained by activation of pine wood biomass with Na₂CO₃, whereas the second and third ones were commercial carbons (WG-12 and Norit RX3 Extra). According to the results, the addition of propylene to the CDM system effectively reduces deactivation of the activated carbon catalysts and permits fast stabilisation of their catalytic activity at a high level.     

Technological aspects of sunflower biomass and brown coal co-firing

The technological problems occurring in the co-firing of biomass and brown coal (lignite) prompted this research project. During the fuel preparation, accidental self-ignition and explosions were several times reported by power plants operators. The aim of this study was to evaluate brown coal, sunflower husks and sunflower husk pellets as fuels for co-firing in energetic boilers. Sunflower husk had a lower ash content and calorific value than the pellets. The range of the combustion temperatures of the biomass (200–300 °C) was narrower than that of brown coal (200–800 °C). The formation of highly alkaline ash from the biomass resulted in the formation in boiler of agglomerates of ash. The elemental composition, thermogravimetric and biological analyses suggested that the pellets contained synthetic additives difficult to identify. The biological method was proposed for evaluating biomass additives. The use of additional agents in the pelletizing process may influence on the combustion parameters. Mixing biomass with brown coal may occasionally result in self-ignition in the logistic chain. Plastic additives and biological activity may contribute to self-ignition.     

ANN–supported control strategy for a solid oxide fuel cell working on demand for a public utility building

The idea of control strategy of SOFC operating to meet demand of a public utility building was presented. The strategy was formulated with the support of Artificial Neural Network. The network was used to predict the demand for electricity. The calculations were carried out on the example of a building of the Institute of Heat Engineering Warsaw University of Technology. The control strategy is influenced by various factors depending on changes in market conditions and operating characteristics of the cell. We can define different objective functions eg: working for own needs, for maximum profit and maximum service life. The article presents a simulation of SOFC operation for demand profile of the IHE building from the selected time period.     

Structural and electrical properties of Cr-doped SrTiO3 porous materials

Series of single-phase materials with assumed formula SrTi_1?xCr_xO₃ (where x = 0, 1, 4, 6 mol.%) were obtained by sol-gel method. The structure and microstructure of materials were characterised by X-ray diffraction and scanning electron microscopy methods. Moreover, the study of electrical properties and evaluation of chemical stability in CO₂/H₂O atmosphere was performed by electrochemical impedance spectroscopy and thermogravimery methods, respectively. The possibility of participation of Cr-doped strontium titanate in oxidation–reduction processes was analysed by temperature-programed reduction (TPR) and temperature-programed oxidation (TPOx) measurements. The changes of lattice parameters together with XPS analysis, the Seebeck coefficient measurements results and TPR profiles obtained for SrTi_1?xCr_xO₃ materials prove the presence of chromium on +3 and +6 oxidation stages. Thus, chromium can be treated as both acceptor- and donor-type dopant in the SrTiO₃ structure. The Cr³⁺/Cr⁶⁺ ratio strongly affects the electrical properties, as the change of conduction mechanism was observed. The results of performed stability test clearly indicate that incorporation of chromium into SrTiO₃ structure results with decrease of chemical stability in CO₂ atmosphere.     

Linear correlation between pH value of stimulated beef and electrical current intensity

The aim of the present study was to determine mathematical relationships between pH changes in beef 24 h post-slaughter and changes in the intensity of electrical current flowing through bull and heifer carcasses during high-voltage electrical stimulation. The electrical stimulation was applied 40 min postmortem for 120 s. The pH values of m. longissimus thoracis et lumborum were analyzed in the function of electrical current intensity changes and its change during electrical stimulation. Mathematical linear correlations of the y = ax ± b type were demonstrated between pH values at 2, 6, and 24 h postmortem and the initial (I_i) and ultimate (I_u) electrical current intensity values, the difference between them and the initial pH values determined before electrical stimulation. High multiple correlation coefficients (R² = 0.416, α ≤ 0.001) between I_u and pH values 24 h post-slaughter enabled concluding that there is a possibility to predict a pH value of stimulated carcass with high accuracy, and thus also beef quality, based merely on the ultimate electrical current intensity values.     

How important is tryptophan in human health?

Tryptophan (Trp) is an amino acid and an essential component of the human diet. It plays a crucial role in many metabolic functions. Clinicians can use Trp levels in the course of diagnosing various metabolic disorders and the symptoms associated with those diseases. Furthermore, supplementation with this amino acid is considered in the treatment of depression and sleep disorders, mainly due to the Trp relationship with the synthesis of serotonin (5-HT) and melatonin. It is also used in helping to resolve cognitive disorders, anxiety, or neurodegenerative diseases. Reduced secretion of serotonin is associated with autism spectrum disorder, obesity, anorexia and bulimia nervosa, and other diseases presenting peripherals symptoms. The literature strongly suggests that Trp has a significant role in the correct functionality of the brain-gut axis and immunology. This information leads to the consideration of Trp as an essential dietary component due to its role in the serotonin pathway. A reduced availability of Trp in diet and nutraceutical supplementation should be considered with greater concern than one might expect. This paper constitutes a review of the more salient aspects gleaned from the current knowledge base about the role of Trp in diseases, associated nutritional disorders, and food science, in general.     

Evaluation of a pressure head and pressure zones in water distribution systems by artificial neural networks

Neural Computing and Applications - Water distribution system design is inherently associated with hydraulic calculations that require thorough evaluation of obtained results and accuracy of the...