Suppression of transient phenomena in hybrid Raman/EDF amplifier

Transient phenomena of hybrid Raman/erbium-doped fiber amplifier (EDFA) upon optical channel add-drop are investigated. The transient responses of surviving channels are resulted from the combined dynamics of Raman amplifier and EDFA. It is shown that the suggested method employing fast gain control of EDFA only can effectively suppress the transient variation of output power. The transient-suppressing hybrid Raman/EDFA is proven to be enough for wavelength-division-multiplexing networks including reconfigurable optical add-drop multiplexer and/or transparent optical cross-connect, if the optical switching speed is carefully chosen.     

Metalorganic Chemical Vapor Deposition of CdTe(133) Epilayers on Si(211) Substrates

Single-crystalline CdTe(133) films have been grown by metalorganic chemical vapor deposition on Si(211) substrates. We studied the effect of various growth parameters on the surface morphology and structural quality of CdTe films. Proper oxide removal from the Si substrate is considered to be the principal factor that influences both the morphology and epitaxial quality of the CdTe films. In order to obtain single-crystalline CdTe(133) films, a two-stage growth method was used, i.e., a low-temperature buffer layer step and a high- temperature growth step. Even when the low-temperature buffer layer shows polycrystalline structure, the overgrown layer shows single-crystalline structure. During the subsequent high-temperature growth, two-dimensional crystallites grow faster than other, randomly distributed crystallites in the buffer layer. This is because the capturing of adatoms by steps occurs more easily due to increased adatom mobility. From the viewpoint of crystallographic orientation, it is assumed that the surface structure of Si(211) consists of (111) terrace and (100) step planes with an interplanar angle of 54.8°. This surface structure may provide many preferable nucleation sites for adatoms compared with nominally flat Si(100) or (111) surfaces. The surface morphology of the resulting films shows macroscopic rectangular-shaped terrace—step structures that are considered to be a (111) terrace with two {112} step planes directed toward 〈110〉.     

Panorama field rendering with scene depth estimation

A novel approach to image-based modelling and rendering is proposed. A set of randomly placed panoramas and omnidirectional depth information of the surrounding scene are used to generate an output image at a vantage viewpoint. Implementation results show that the proposed approach achieves smooth walkthrough at a realtime     

柔性有源OLED显示器制造几点技术方面的考虑

AMOLED在柔性显示领域前途似锦。LG显示展示了一款全彩4in柔性AMOLED样机,衬底为80μm厚的不锈钢薄片,曲率达到5cm弯曲半径。本文就此项柔性显示技术所面临的挑战进行了探讨．包括柔性衬底衬底的传送、如何获得特性稳定可靠的TFT以使OLED的亮度和一致性适用于此项技术的商业化推广。     

Signaling and Control Procedures Using Generalized MPLS Protocol for IP over an Optical Network

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP‐centric signaling and control architecture based on the generalized multi‐protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross‐connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS‐based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user‐network interface and network‐network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to GMPLS signaling.     

Profit Aware Circuit Design Under Process Variations Considering Speed Binning

In this paper, a profit-aware design metric is proposed to consider the overall merit of a design in terms of power and performance. A statistical design methodology is then developed to improve the economic merit of a design considering frequency binning and product price profile. A low-complexity sensitivity-based gate sizing algorithm is developed to improve economic gain of a design over its initial yield-optimized design. Finally, we present an integrated design methodology for simultaneous sizing and bin boundary determination to enhance profit under an area constraint. Experiments on a set of ISCAS'85 benchmarks show in average 19% improvement in profit for simultaneous sizing and bin boundary determination, considering both leakage power dissipation and delay bounds compared to a design initially optimized for 90% yield at iso-area in 70-nm bulk CMOS technology.     

Effect of Ionization Characteristics on Electrochemical Migration Lifetimes of Sn-3.0Ag-0.5Cu Solder in NaCl and Na<Subscript>2</Subscript>SO<Subscript>4</Subscript> Solutions

Anodic dissolution characteristics and electrochemical migration (ECM) behavior of Sn-3.0Ag-0.5Cu solder in NaCl and Na₂SO₄ solutions were investigated using anodic polarization tests and water drop tests (WDT). The ECM lifetime of Sn-3.0Ag-0.5Cu solder in NaCl solution (42.4 s) was longer than that in Na₂SO₄ solution (34.8 s). The pitting potential of Sn-3.0Ag-0.5Cu solder in NaCl solution (135 mV, SCE) was higher than that in Na₂SO₄ solution (−367 mV, SCE). The passivity film (SnO₂) formed on Sn-3.0Ag-0.5Cu solder during WDTs in NaCl solution was thicker than that formed in Na₂SO₄ solution. Therefore, the longer ECM lifetime of Sn-3.0Ag-0.5Cu solder in NaCl solution than in Na₂SO₄ solution can be attributed to the higher pitting potential in the NaCl solution, which is ascribed to the formation of a thicker passivity film (SnO₂) in the former. It was confirmed that microelements such as Ag and Cu do not take part in ECM because they form chemically stable intermetallic compounds with Sn. We believe that Sn is the only element that contributes to ECM, and dissolution of Sn at the anode is possibly the rate-determining step of ECM of Sn-3.0Ag-0.5Cu solder.     

Inverted Staggered Poly-Si Thin-Film Transistor With Planarized SOG Gate Insulator

In this letter, we have studied the inverted staggered thin-film transistor (TFT) using a spin-on-glass (SOG) gate insulator and a low-temperature polycrystalline silicon (poly-Si) by Ni-mediated crystallization of amorphous silicon. The p-channel poly-Si TFT exhibited a field-effect mobility of 48.2 cm²/V ldr s, a threshold voltage of -4.2 V, a gate-voltage swing of 1.2 V/dec, and a minimum off-current of < 4 times 10^-13A/ mum at V_ds = -0.1 V. Therefore, the gate planarization technology by SOG can be applicable to low-cost large-area poly-Si active-matrix displays.     

Digital Laser Micropainting for Reprogrammable Optoelectronic Applications

Structural coloration is closely related to the progress of innovative optoelectronic applications, but the absence of direct, on-demand, and rewritable coloration schemes has impeded advances in the relevant area, particularly including the development of customized, reprogrammable optoelectronic devices. To overcome these limitations, a digital laser micropainting technique, based on controlled thin-film interference, is proposed through direct growth of the absorbing metal oxide layer on a metallic reflector in the solution environment via a laser. A continuous-wave laser simultaneously performs two functions—a photothermal reaction for site-selective metal oxide layer growth and in situ real-time monitoring of its thickness—while the reflection spectrum is tuned in a broad visible spectrum according to the laser fluence. The scalability and controllability of the proposed scheme is verified by laser-printed painting, while altering the thickness via supplementary irradiation of the identical laser in the homogeneous and heterogeneous solutions facilitates the modification of the original coloration. Finally, the proof-of-concept bolometer device verifies that specific wavelength-dependent photoresponsivity can be assigned, erased, and reassigned by the successive application of the proposed digital laser micropainting technique, which substantiates its potential to offer a new route for reprogrammable optoelectronic applications.     

Hierarchically Assembled Mesenchymal Stem Cell Spheroids Using Biomimicking Nanofilaments and Microstructured Scaffolds for Vascularized Adipose Tissue Engineering

Composite multicellular spheroids composed of mesenchymal stem cells (MSCs) and synthetic biodegradable nanofilaments are fabricated. Extracellular‐matrix‐mimicking nanofilaments, prepared from transverse fragmentation of semicrystalline poly(L ‐lactic acid) nanofibers and subsequent surface modification with cell adhesive peptides, are used to form composite multicellular spheroids with MSCs by cellular self‐assembly. The size of the composite spheroids could be readily controlled with the integrated amount of the nanofilaments. The composite spheroids show enhanced adipogenic potential compared to homotypic spheroids. The resultant spheroids are used as building blocks for 3D biohybrid construction with the assistance of a microstructured scaffold fabricated by a direct polymer melt deposition process. An angiogenic growth factor, basic fibroblast growth factor, is also locally delivered in a sustained fashion from the heparinized scaffold surface for facile neovascularization of adipogenic tissue. The produced multiscaled and multifunctional hybrid MSC construct enable the successful formation of vascularized adipose tissue in vivo.