Effect of Nitrogen Atmosphere on the Densification of a 3-mol%-Yttria-Doped Zirconia

The densification behavior of a 3-mol%-Y₂O₃-doped ZrO₂ (3Y-ZrO₂) has been investigated under N₂ and O₂ atmospheres. Powder compacts have been sintered at 1550° and 1400°C for various times. The density of the specimen sintered at 1550°C is higher in N₂ than in O₂, while the contrary result is obtained in the case of the specimen sintered at 1400°C. Such results can be explained in terms of nitrogen solubility and oxygen vacancy in a ZrO₂ matrix. Because nitrogen solubility into the ZrO₂ increases with an increase in heat-treatment temperature, leading to the formation of oxygen vacancy, the densification rate becomes higher. The present study thus shows evidence of nitrogen solubility into the ZrO₂ and its role on the densification behavior of 3Y-ZrO₂.     

Mutation of herpesvirus thymidine kinase to generate ganciclovir-specific kinases for use in cancer gene therapies

Understanding the functional and mechanistic properties of themulti-substrate herpes simplex virus type-1 thymidine kinase(HSV-1 TK) remains critical to defining its role as a majorpharmacological target in herpesvirus and gene therapies forcancer. An inherent limitation of the activity of HSV-TK isthe >70-fold difference in the K_ms for phosphorylation ofthymidine over the pro-drug ganciclovir (GCV). To engineer anHSV-1 TK isoform that is specific for GCV as the preferred substrate,16 site-specific mutants were generated. The mutations wereconcentrated at conserved residues involved in nucleoside basebinding, Gln125 and near sites 3 and 4 involved in catalysisand substrate binding. The substrate preferences of each mutantenzyme were compared with wild-type HSV-1 TK. One mutant, termedQ7530 TK, had a lower K_m for GCV than thymidine. Expressionof the Q7530 TK in tumor cells indicated comparable metabolismto and improved sensitivity to GCV over wild-type HSV-1 TK,with minimal thymidine phosphorylation activity. A molecularmodeling simulation of the different HSV-1 TK active-sites wasdone for GCV and thymidine binding. It was concluded that mutationsat Gln125 and near site 4, especially at Ala168, were responsiblefor loss of deoxypyrimidine substrate binding.     

Fabrication of Patterned Inorganic–Organic Hybrid Film for the Optical Waveguide by Microfluidic Lithography

Inorganic–organic hybrid materials for the optical waveguide were synthesized by the sol–gel process starting from the acid-catalyzed solutions of phenyltrimethoxysilane, methyltriethoxysilane, and tetraethylorthosilicate. The control of the refractive index in the organically modified silicate films was achieved by varying the content of phenyltrimethoxysilane incorporated as a refractive index modifier. A single spin-coating with the precursor solution produced a crack-free buffer layer of 22-μm thickness with a dense microstructure. For the fabrication of the patterned guiding layer on top of the buffer layer, the microfluidic lithography method was used. The patterned microlines of the linewidth of 20–35 μm with a sharp edge definition could form by filling the precursor solutions into the microchannels associated with the polydimethylsiloxane microfluidic device. The patterned guiding layer was optically transparent as similar as the bare quartz glass at the wavelength above 500 nm and had a low propagation loss of 0.77 dB/cm at 1310 nm.     

Amelioration of mechanical brittleness in hyperbranched polymer. 1. Macroscopic evaluation by dynamic viscoelastic relaxation

Hyperbranched poly(ether ketone)-b-linear poly(ether ketone)-b-hyperbranched poly(ether ketone) (HLHPEK) triblock copolymers with two different block compositions were prepared as an approach to improve the mechanical brittleness of hyperbranched poly(ether ketone) (HPEK). From the time-temperature superposition of dynamic shear moduli, G′(ω) and G″(ω), of HPEK and two HLHPEKs, it was investigated that the junction points between G′(ω) and G″(ω) shifted to the higher frequencies and the rubbery plateau region spread wider over the reduced frequency axis as the linear blocks were introduced and their compositions were increased. Such changes in viscoelastic response were consequences of increase in the amount of chain entanglements additionally formed by the linear blocks. In order to verify the effect of the linear block incorporation on amelioration of the mechanical brittleness, the degree of brittleness and its improvement were evaluated from the temperature dependence of the shift factors, a_Ts, experimentally obtained during the superposition of the dynamic moduli and of the average viscoelastic relaxation times, τ_HNs, determined with empirical Havriliak-Negami distribution function. From the nonlinear curve fittings of the a_Ts and the τ_HNs by the Vogel-Tamman-Fulcher equation, the degree of brittleness for HPEK and HLHPEK triblock copolymers were quantified as values of the material parameter D, an indicative of deviation from the linear Arrhenius behavior and a measure of fragility of the given material. The tendency of increasing D values with the linear block compositions confirmed substantial improvement of the mechanical brittleness in the HLHPEK triblock copolymers compared to HPEK. Therefore, the approach to copolymerize HPEK with its chemically analogous linear counterpart was verified to be an effective strategy to impart molecular entanglements and hence ameliorate the mechanical brittleness on the basis of macroscopic rheological evaluation.     

Influences of metallic polymeric materials on the properties of fresh polyester and acrylic polymer concrete

To investigate the influences of three metallic polymeric materials in polyester and acrylic fresh polymer concretes (PCs), PC‐incorporated different levels of these materials have been investigated for their properties of fresh PC. The mix design was made and optimized for workability, strength, and economy, depending on the resin viscosity, the intended use, and the additional quantities of these polymeric materials. The properties investigated include workability, working time, and curing time of fresh PC. It is concluded that these polymeric materials offer the possibility of improving properties of polyester and acrylic fresh polymer concretes. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Effects of diacrylate monomers on the mechanical properties of polymer concrete made with wet aggregates

Because normal polymer concrete does not work well with wet aggregates, diacrylate (DA) monomers were evaluated for improving the mechanical properties of polymer concrete made with wet aggregates. Zinc diacrylate (ZDA) and calcium diacrylate (CDA) were each used as an additive to resins (two epoxies). The variables were the amount of diacrylate monomers and the aggregate conditions (wet or dry). Compressive strength, flexural strength, workability, working time, and curing time were measured. ZDA was found to improve the workability and the working time, and CDA was found to improve the compressive and the flexural strength. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1077–1085, 2004     

Binary blends of nylons with ethylene vinyl alcohol copolymers: Morphological,thermal, rheological,and mechanical behavior

Binary blends of ethylene vinyl alcohol copolymers, containing 62 (EVOH-62) and 71 (EVOH-71) mole percent vinyl alcohols, with nylons (nylon-6, nylon-6/12, and nylon-12) have been prepared from melt mixing in a twin screw compounding machine. Morphological, thermal, rheological, and mechanical properties were determined. EVOH-62/nylon-6 and EVOH-71/nylon-6 blends showed homogeneous phase morphologies in the nylon-6-rich region, and fine phase separations (c.a. 2 × 10^?7 m) in the EVOH-rich region. Melting point depression, positive deviations in viscosity and flexural modulus, and negative deviation in impact strength from the simple additive rule were generally observed. And the results were possibly interpreted in terms of compatibility and increased nylon/EVOH interactions over the nylon/nylon interactions. On the contrary, clean phase separations in large domains were observed from EVOH-71/nylon-6/12 and EVOH-71 /nylon-12 blends. Fibrillation was also obtained from EVOH rich blends. Probably due to the incompatible nature of these blends, yield at low rate of shear and a mechanical property drop were also observed.     

Adhesion property of novel polyimides with 1‐[3′,5′‐bis(trifluoromethyl)phenyl] pyromellitic dianhydride

Novel polyimides were synthesized from 1‐[3′,5′‐bis(trifluoromethyl)phenyl] pyromellitic dianhydride (6FPPMDA) by a conventional two‐step process: the preparation of poly(amic acid) followed by solution imidization via refluxing in p‐chlorophenol. The diamines used for polyimide synthesis included bis(3‐aminophenyl)‐3,5‐bis(trifluoromethyl)phenyl phosphine oxide, bis(3‐aminophenyl)‐4‐trifluoromethylphenyl phosphine oxide, and bis(3‐aminophenyl)phenyl phosphine oxide. The synthesized polyimides were designed to have a molecular weight of 20,000 g/mol by off‐stoichiometry and were characterized by Fourier transform infrared, NMR, differential scanning calorimetry, and thermogravimetric analysis. In addition, their intrinsic viscosity, solubility, water absorption, and coefficient of thermal expansion (CTE) were also measured. The adhesion properties of the polyimides were evaluated via a T‐peel test with bare and silane/Cr‐coated Cu foils, and the failure surfaces were investigated with scanning electron microscopy. The 6FPPMDA‐based polyimides exhibited high glass‐transition temperatures (280–299°C), good thermal stability (>530°C in air), low water absorption (1.46–2.16 wt %), and fairly low CTEs (32–40 ppm/°C), in addition to good adhesion properties (83–88 g/mm) with silane/Cr‐coated Cu foils. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1801–1809, 2005     

Polymer gel electrolytes prepared from P(EG‐co‐PG) and their nanocomposites using organically modified montmorillonite

Polymer gel electrolytes were prepared by thermal crosslinking reaction of a series of acrylic end‐capped poly(ethylene glycol) and poly(propylene glycol) [P(EG‐co‐PG)] having various geometries and molecular weights. Acrylic end‐capped prepolymers were prepared by the esterification of low molecular weight (M_n: 1900–5000) P(EG‐co‐PG) with acrylic acid. The linear increase in the ionic conductivity of polymer gel electrolyte films was observed with increasing temperature. The increase in the conductivity was also monitored by increasing the molecular weight of precursor polymer. Nanocomposite electrolytes were prepared by the addition of 5 wt % of organically modified layered silicate (montmorillonite) into the gel polymer electrolytes. The enhancement of the ionic conductivity as well as mechanical properties was observed in the nanocomposite systems. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 894–899, 2004     

Prepreg aging in relation to tack

Thermoanalytical measurements and tack tests were both performed using a commercially available carbon fiber/epoxy prepreg system (Hercules 3501–6) to examine changes caused by aging as they affect handling and processability of thermosetting matrix-based composites. Combining these techniques, a relationship between prepreg bulk and surface characteristics in relation to aging was investigated. Isothermal kinetic studies at low temperatures showed maximum conversions (α_m) that increased with increasing cure temperatures. In addition, a linear relationship between glass transition temperatures (T_g) and conversions (α) was observed regardless of aging (or cure) temperatures. Energy of separation of prepreg stacks, which may be viewed as a measure of prepreg tack, showed a maximum value at a specific temperature. The maximum energy of separation was observed in the temperature range of 20–25°C above the glass transition temperature for a given sample. However, the maximum energy of separation values decreased with increasing aging times (or conversions), implying that prepreg tack was a viscoelastic property rather than a viscous property of the resin matrix in the prepreg.