Comprehensive characterization of the functional activities of pressurized liquid and ultrasound-assisted extracts from Chlorella vulgaris

Chlorella vulgaris has been referred as a potential source of bioactive compounds (carotenoids and fatty acids). In this work, the ability of an environmentally friendly extraction technique such as Pressurized Liquid Extraction (PLE) and a traditional extraction technique such as Ultrasound-Assisted Extraction (UAE) to obtain functional compounds from C. vulgaris, at analytical scale, has been demonstrated. Seeked bioactivities were antioxidant and antimicrobial, for their interest in the food industry. Therefore, a methodology including analytical extraction, in-vitro assays and chemical characterization via HPLC-DAD and GC–MS has been used to determine the interest of Chlorella as a source of functional food ingredients. Results demonstrated that PLE provide higher yields than UAE while similar bioactivities were obtained. Important concentration of carotenoids (lutein, neoxanthin, β-carotene, etc.), chlorophylls, sterols, phytols, and fatty acids (among others) have been found in Chlorella extracts that could be correlated to the observed biological activity.     

Comparison of Peleg and Azuara et al. models in the modeling mass transfer during pile salting of goat sheets

Application of the Peleg and Azuara et al. models for describing mass transfer during pile salting of goat sheets using different mixtures of NaCl, KCl, CaCl₂ and MgCl₂ was investigated The high coefficient of determination (R² > 0.97 and R² > 0.95 for Peleg and Azuara et al. models, respectively) and the modulus of mean relative errors (MRE < 10% for both models) indicated the acceptability of both Peleg and Azuara et al. models for predicting both moisture loss and salt uptake. The equilibrium moisture and salt contents were estimated using Peleg rate constants and Azuara et al. model parameters. Equilibrium moisture (x_w) and salt contents (x_s) varied from 0.522 to 0.860 g water/g db and from 0.311 to 0.352 g NaCl/g db respectively. Multiple comparison of means showed that x_w and x_s predicted by the Peleg model were lower than those estimated by the Azuara et al. model. The values differed by 1.86–13.6% for x_w and by 1.13–10.57% for x_s.     

Characterisation of Micrococcaceae isolated from different varieties of chorizo

A total of 426 strains of Micrococcaceae bacteria isolated from chorizo (a traditional Spanish fermented sausage) were identified. The chorizos were sampled from three regions of Castilla and León in Spain: Burgos, Segovia and Salamanca. Two factories were chosen in each region and the samples were taken at three stages of ripening. Staphylococcus xylosus was the most predominant species isolated (95%). Twelve strain types of S. xylosus were established according to their fermentation patterns, and two of them, S. xylosus type 2 and S. xylosus type 5, made up the majority of the strains of S. xylosus isolated (27 and 52%). Production of acetoin, nitrate reductase, urease activity, proteolytic and lipolytic activity were determined for all isolates. The percentage of strains of S. xylosus producing acetoin depends on the manufacturing location. In general, the proteolytic and lipolytic activities of the S. xylosus isolated from chorizo from Castilla and León were low and moderate; 97% of the strains showed nitrate reductase and urease activity. According to our results and to previous investigations, it seems that S. xylosus type 5, showing nitrate reductase and urease activity, low-moderate proteolytic and lipolytic activities and not producing acetoin would be suitable as a starter culture. Of the strains isolated in this study, 38% comply with these requirements.     

Catalytic performance of silica-aluminas synthesised with the help of chitosan biopolymer

Mesoporous amorphous silica-aluminas were synthesised with standard aluminium and silicon sources by means of the formation of inorganic–organic composites with the addition of chitosan biopolymer, and compared to analogous catalysts synthesised conventionally. Some catalysts were subjected to hydrothermal treatment. The resulting specific surface areas were from 480 to 573 m²/g in the untreated samples and 300–430 m²/g in the hydrotreated catalysts, average pore sizes ranging from 32 to 100 Å with sharp, unimodal distributions. The chitosan materials showed higher specific surface areas and larger pore sizes than those of their non-chitosan counterparts. The most important differences in the acidic properties were in the relationships between tetrahedral and octahedral aluminium atoms, the chitosan materials having higher relative amounts of tetrahedral aluminium than the conventional silica-aluminas. Evidences of stabilization in the physical and chemical properties were observed in the chitosan-containing catalysts. The catalytic performance was evaluated with the conversion of tri-isopropylbenzene at 400 °C, to assess activity and accessibility, and cyclohexene at 300 °C, to assess hydrogen transfer properties. The highest activity and accessibility was observed in the hydrotreated, chitosan-containing catalyst, while hydrogen transfer capabilities were similar to those of medium unit cell sizes, equilibrium commercial FCC catalysts.     

Parameter reference immutability: formal definition, inference tool, and comparison

Knowing which method parameters may be mutated during a method’s execution is useful for many software engineering tasks. A parameter reference is immutable if it cannot be used to modify the state of its referent object during the method’s execution. We formally define this notion, in a core object-oriented language. Having the formal definition enables determining correctness and accuracy of tools approximating this definition and unbiased comparison of analyses and tools that approximate similar definitions. We present Pidasa, a tool for classifying parameter reference immutability. Pidasa combines several lightweight, scalable analyses in stages, with each stage refining the overall result. The resulting analysis is scalable and combines the strengths of its component analyses. As one of the component analyses, we present a novel dynamic mutability analysis and show how its results can be improved by random input generation. Experimental results on programs of up to 185 kLOC show that, compared to previous approaches, Pidasa increases both run-time performance and overall accuracy of immutability inference.     

Finite element simulation to design constructive elements: An application to light gypsum plaster for partitions

In the past decade finite element simulation has become a very useful methodological tool in the different science fields. This article offers a specific application of this powerful mechanism used for analyzing the mechanical behaviour of constructive elements in the design phase, prior to the laboratory tests’ stage. The aim of applying this simulation is to minimize the high cost the real scale fabrication of these elements entails.This research focuses on the analysis by finite element simulations (FES) of several construction elements used as interior partitions and made of plaster lightened with cork. The results of the study will allow us to determine the most suitable thickness values and proportions to ensure that the requirements stated by the standards and norms for light partitions are fulfilled. These parameters will later be useful for the final laboratory tests.Two simulation groups have been developed using the ANSYS application: firstly, a partition leaf of 200 × 260 cm is studied exposing it to a superficial load and to an eccentric load following the EUAtc common directives for the technical appreciation of light panels, 1973). Second, the behaviour of a panel with a through opening is tested with the simulation regarding the different hypothesis of the structure deformation supporting and surrounding it.Finally, it is proved that the element of thickness 7 cm and proportions stated at the beginning ensure a good performance regarding strain without producing any visible fissures, and therefore are suitable for a further laboratory test on real models.     

3D sound interactive environments for blind children problem solving skills

Audio-based virtual environments have been increasingly used to foster cognitive and learning skills. A number of studies have also highlighted that the use of technology can help learners to develop effective skills such as motivation and self-esteem. This study presents the design and usability of 3D interactive environments for children with visual disabilities to help them solve problems in Chilean geography and culture. We introduce AudioChile, a virtual environment that can be navigated through 3D sound to enhance spatiality and immersion throughout the environment. 3D sound is used to orientate, avoid obstacles, and identify the positions of various characters and objects within the environment. We have found during the usability evaluation that sound can be fundamental for attention and motivation purposes during interaction. Learners identified and clearly discriminated environmental sounds to solve everyday problems, spatial orientation, and laterality.     

Two novel phospholipid fatty acids from the caribbean spongeGeodia gibberosa

The novel fatty acids (Z)-6-nonadecenoic acid (1) and (Z)-17-pentacosenoic acid (2) were characterized in the spongeGeodia gibberosa. These fatty acids were mainly found in phosphatidylethanolamine and phosphatidylcholine.     

Analog Adaptive Median Filters

The implementation of analog adaptive median filters for image processing is discussed. The adaptive median filter is based on transconductance comparators, whose saturation current is adapted to act as a local weight operator. Transistor level simulations have shown excellent results in removing incidence noise. A 249 × 209 pixel image, corrupted with 35% salt and pepper noise, is used to test the adaptive median filter. All the simulations were made using BSIM3's level 49 model and 1.2 m MOSIS technology parameters.     

Distillation column configurations in ammonia–water absorption refrigeration systems

In ammonia–water absorption refrigeration systems a purification process to reduce the water content in the vapour leaving the generator is required. During this process the water content in the vapour must be reduced to a minimum, otherwise it tends to accumulate in the evaporator and strongly deteriorates the efficiency of the system. The vapour purification can be carried out by partial condensation, by establishing a liquid–vapour counter flow or by combining both methods. In systems with partial condensation, the distillation column can be composed of one or more rectifiers using different cooling mediums, and the rectifying and stripping sections. In complete condensation systems only the rectifying and stripping sections can be used. Therefore different distillation column arrangements should be considered. This paper presents a study of several distillation column configurations for single stage ammonia–water absorption refrigeration systems with partial and complete condensation. In order to evaluate and compare the different configurations, a parameter that indicates the ratio of the ammonia vapour concentration increase in each part of the column to the total ammonia purification has been defined. The analysis has been based on the system COP. Finally the efficiency in each part of the column has been calculated to estimate its design requirements.