Analysis and characterization of traveling-wave electrode in electroabsorption modulator for radio-on-fiber application

Comparing with a lumped electroabsorption modulator (EAM), we show the merits of a long EAM with traveling-wave electrode with high radio-frequency (RF) gain that could be used in high-frequency analog application. By terminating the RF output port with the characteristic impedance of 30 /spl Omega/, the device exhibited a large enhancement of 6 dB above 10 GHz in the electrical-to-optical response and a wide fractional bandwidth as estimated from simulation. In addition, an input impedance matching circuit of stub embedded on the device chip was found to be very effective for improving RF characteristics in the narrow band of frequency.     

Channel Estimation in Long Term Evolution Uplink Using Minimum Mean Square Error-Support Vector Regression

In this paper, minimum mean square error-support vector regression (MMSE-SVR) is proposed, which is shown to be adequate for the estimation of the long term evolution (LTE) uplink channel with nonlinear features. MMSE-SVR was applied to estimate real channel environments such as the vehicular A channels defined by the International Telecommunication Union (ITU). The simulation results show that the proposed method has a better performance than the least squares support vector machine (LS-SVM) and the standard MMSE with linear and spline interpolation.     

Outstanding Low-Temperature Performance of Structure-Controlled Graphene Anode Based on Surface-Controlled Charge Storage Mechanism

The energy and power performance of lithium (Li)-ion batteries is significantly reduced at low-temperature conditions, which is mainly due to the slow diffusion of Li-ions in graphite anode. Here, it is demonstrated that the effective utilization of the surface-controlled charge storage mechanism through the transition from layered graphite to 3D crumpled graphene (CG) dramatically improves the Li-ion charge storage kinetics and structural stability at low-temperature conditions. The structure-controlled CG anode prepared via a one-step aerosol drying process shows a remarkable rate-capability by delivering ≈206 mAh g^–1 at a high current density of 10 A g^–1 at room temperature. At an extremely low temperature of −40 °C, CG anode still exhibits a high capacity of ≈154 mAh g^–1 at 0.01 A g^–1 with excellent rate-capability and cycling stability. A combination of electrochemical studies and density functional theory (DFT) reveals that the superior performance of CG anode stems from the dominant surface-controlled charge storage mechanism at various defect sites. This study establishes the effective utilization of the surface-controlled charge storage mechanism through structure-controlled graphene as a promising strategy to improve the charge storage kinetics and stability under low-temperature conditions.     

Transient Modeling and Analysis of Pulse-Width Modulated Z-Source Inverter

The newly proposed Z-Source inverter has been proven in the literature to exhibit both steady-state voltage buck and boost capabilities using a unique LC impedance network coupled between the power source and converter circuit. This paper now presents transient modeling and analysis of a voltage-type Z-source inverter. These aspects are found to be challenging and they need to be carefully investigated before attempting to design advanced control algorithms for controlling the Z-source inverter. Through detailed analysis, the paper identifies several phenomena on the dc and ac-sides of the inverter, which would result in the inverter having a non-minimum-phase transient response. The dc-side phenomenon is associated with the Z-source impedance network, which is shown through small-signal and signal-flow-graph analyses to be having a right-half-plane zero in its control-to-output transfer function. Also, the ac-side phenomenon is shown through space vector analysis to depend on the time intervals of inverter states used for reconstructing the desired inverter output voltage. Based on the ac vectorial analysis, a method for improving the inverter transient response is also presented. Last, simulation results obtained using a switching-functional model and experimental results obtained using a laboratory prototype are presented for validating the described theoretical concepts     

A single-chip storage LSI for home networks

Network direct attached storage (NDAS) is a network storage architecture that allows direct attachment of existing ATA/ATAPI devices to Ethernet without a separate server. Unlike other architectures such as NAS, SAN, and USB mass storage, no server computer intervenes between the storage and the client hosts. We describe an NDAS disk controller (NDC) amenable to low-cost single-chip implementation that processes a simplified L3/L4 protocol and converts commands between ATA/ATAPI and Ethernet, while the remaining complex tasks are performed by remote hosts. Unlike NAS architectures that use TCP/IP, NDAS uses a TCP-like lean protocol that lends itself well to high-performance hardware realization. Thanks to the simple NDAS architecture and protocol, an NDC implemented on a single 4 mm /spl times/ 4 mm chip in 0.18 /spl mu/m CMOS technology achieves a maximum throughput of 55 Mbytes/s on gigabit Ethernet, which is comparable to that of a high-performance disk locally attached to a host computer.     

Harmonic decomposition in PDE-based denoising technique for magnetic resonance electrical impedance tomography

Recent progress in magnetic resonance electrical impedance tomography (MREIT) research via simulation and biological tissue phantom studies have shown that conductivity images with higher spatial resolution and accuracy are achievable. In order to apply MREIT to human subjects, one of the important remaining problems to be solved is to reduce the amount of the injection current such that it meets the electrical safety regulations. However, by limiting the amount of the injection current according to the safety regulations, the measured MR data such as the z-component of magnetic flux density Bz in MREIT tend to have low SNR and get usually degraded in their accuracy due to the nonideal data acquisition system of an MR scanner. Furthermore, numerical differentiations of the measured Bz required by the conductivity image reconstruction algorithms tend to further deteriorate the quality and accuracy of the reconstructed conductivity images. In this paper, we propose a denoising technique that incorporates a harmonic decomposition. The harmonic decomposition is especially suitable for MREIT due to the physical characteristics of Bz. It effectively removes systematic and random noises, while preserving important key features in the MR measurements, so that improved conductivity images can be obtained. The simulation and experimental results demonstrate that the proposed denoising technique is effective for MREIT, producing significantly improved quality of conductivity images. The denoising technique will be a valuable tool in MREIT to reduce the amount of the injection current when it is combined with an improved MREIT pulse sequence.     

Metamaterial-based electronically controlled transmission-line structure as a novel leaky-wave antenna with tunable radiation angle and beamwidth

A metamaterial-based electronically controlled transmission-line structure is presented and demonstrated as a novel leaky-wave (LW) antenna with tunable radiation angle and beamwidth functionalities. This structure is, in essence, a composite right/left-handed (CRLH) microstrip structure incorporating varactor diodes for fixed-frequency voltage-controlled operation. Angle scanning at a fixed frequency is achieved by modulating the capacitances of the structure by adjusting the (uniform) bias voltage applied to the varactors. Beamwidth tuning is obtained by making the structure nonuniform by application of a nonuniform bias voltage distribution of the varactors. A rigorous analysis based on an extension of the CRLH concept is proposed and the corresponding dispersion curves, obtained by equivalent-circuit formulas with LC parameters extracted from full-wave simulation, are shown. A 30-cell LW antenna structure, incorporating both series and shunt varactors for optimal impedance matching and maximal tuning range, is designed. This prototype exhibits continuous scanning capability from 50/spl deg/ to -49/spl deg/ by tuning the bias voltages from 0 to 21 V at 3.33 GHz. A maximum gain of 18 dBi at broadside is also achieved. In addition, it provides half-power beamwidth variation of up to 200% with comparison to the case of uniform biasing. The effect of intermodulation due to the nonlinearity of the varactors is shown to be negligible for antenna applications. The antenna is tested in a 10-Mb/s binary phase-shift keying transmission link and successful recovery of the baseband data is demonstrated.     

Probing stress effects in HfO2 gate stacks with time dependent measurements

Effects of constant voltage stress (CVS) on gate stacks consisting of an ALD HfO₂ dielectric with various interfacial layers were studied with time dependent sensing measurements: DC I–V, pulse I–V, and charge pumping (CP) at different frequencies. The process of injected electron trapping/de-trapping on pre-existing defects in the bulk of the high-κ film was found to constitute the major contribution to the time dependence of the threshold voltage (V_t) shift during stress. The trap generation observed with the low frequency CP measurements is suggested to occur within the interfacial oxide layer or the interfacial layer/high-κ interface, with only a minor effect on V_t.     

A novel phase noise reduction technique in oscillators usingdefected ground structure

A new technique to reduce the phase noise in microwave oscillators is developed using the resonant characteristic of the defected ground structure (DGS). Two kinds of oscillators have been designed and measured for the examination of the reduction of phase noise by the DGS. The first adopts the DGS section under the microstrip line at the gate circuit, while the second has only the conventional microstrip line. Measurement shows reduced phase noise by 10-15 dB in the oscillator with the DGS compared to the conventional one     

Low-power CSD linear phase FIR filter structure using verticalcommon sub-expression

A high-speed/low-power canonic signed digit (CSD) linear phase finite impulse response (FIR) filter structure using vertical common sub-expression is proposed. In the conventional linear phase CSD filter, the horizontal common sub-expression method (see Hartley, 1996) has been widely utilised due to the inherent symmetrical filter coefficients. However, use has been made of the fact that the most significant bits of adjacent filter coefficients in the linear phase filter are also equal since they have mostly similar values. Through the example, it is shown that the proposed structure is more efficient in the case where bit precision of implementation is lower