Characterisation of solution annealed VT-14 titanium alloy using eddy current based electrical resistivity measurements

This paper discusses characterisation of microstructures in Ti-4.5Al-3Mo-1V (VT-14) alloy specimens solutionized in the temperature range of 923K–1373K, using room temperature electrical resistivity measurements. Using phase angle of impedance change in eddy current coil as a parameter, calibration curve between resistivity and phase angle has been established using three reference specimens of known resistivity. The changes in the electrical resistivity of the specimens have been correlated with optical microscopy investigations. The electrical resistivity of unstable β phase has been compared with α and α′ phases and possible reasons for higher resistivity of β phase and lower resistivity of α′ have been given based on the rule of mixtures and scattering and mobility of electrons. The electrical resistivity of α′ martensite phase of the chosen VT-14 alloy has been determined as 1.04 αΩ-m. The studies reveal that it may be possible to identify the β transus temperature of α+β titanium alloys from the electrical resistivity data.     

Amalgamation and application of nano chitosan cross‐linked with fish scales based activated carbon as an adsorbent for the removal of reactive dye (RB9)

The extensive discomfort in the expulsion of toxic pollutants even at mild concentrations has demanded the need for prompt methods for the evacuation of dyes and heavy metals. The effective method for depuration of dye from the effluent is by sorption. Chitosan is a bio‐polymer which is gaining an increasing interest as one of the sorbents. It was obtained from the crab shells by undergoing several chemical processes and used as an adsorbent for dye, metal removal and also for pharmaceutical purposes. Cross linking it with other co polymers will increase the capacity of adsorption to a maximum level. Fish scales are considered to be a major waste in the food industry and since it takes a long time for decomposing it is considered to be one of the pollutants. Hence it is utilised by converting it into activated carbon by preliminary treatment and into a muffle furnace. The obtained activated carbon is combined with chitosan by using a cross linker and utilised for adsorption mechanism. To analyse the effect of chitosan cross linked with activated carbon obtained from fish scales in adsorption of dye Reactive Blue 9 (RB9) to evaluate the adsorption studies, kinetics, mass transfer studies, thermodynamics of the bio adsorbent.Inspec keywords: dyes, wastewater treatment, effluents, mass transfer, activated carbon, adsorption, polymer blends, water pollution control, thermodynamics, reaction kinetics, furnaces, recycling, industrial waste, waste recovery, food processing industry, pharmaceutical industry, renewable materials, nanoparticles, toxicologyOther keywords: fish scales, activated carbon, reactive dye removal, toxic pollutants, heavy metals, bio‐polymer, nanochitosan, bio adsorbent, amalgamation, RB9 dye, industrial effluent, crab shells, adsorption method, pharmaceutical purposes, copolymers, food industry waste, waste recovery, recycling process, muffle furnace, reaction kinetics, mass transfer, thermodynamic analysis, ReactiveBlue 9, wastewater treatment, water pollution control, C     

Ultrasonic velocity measurements for characterizing the annealing behaviour of cold worked austenitic stainless steel

Precise measurements of shear wave velocities have been made in 20% cold worked and annealed samples of alloy D9 (Ti-modified austenitic stainless steel) to characterize the microstructural changes during annealing. The variation in wave velocity with annealing time exhibited a three stage behaviour. In the first stage, a slight increase in the velocity during recovery regime has been observed. This is followed by a significant increase in the velocity in the recrystallization regime (second stage) and reaching saturation on completion of recrystallization (third stage). Microstructural observations using optical metallography confirmed these three stages. The maximum variation in velocity is observed only when the polarization or the propagation direction of the shear wave is alingned with the cold working direction. Variation in shear wave velocity during annealing process, in general, is just opposite to that of the variation in longitudinal wave velocity. A number of velocity measurements were made by changing the propagation and polarization directions of the shear waves with respect to the cold working direction. Based on these measurements, a suitable velocity ratio parameter is suggested for determining the degree of recrystallization during annealing of cold worked alloy D9.     

A 70-Mbit/s (RZ) 16×16 crosspoint switch for ternary-encodedsignals

An experimental 16×16 crosspoint switch that can switch ternary signals and handle data rates of up to 70 Mb/s return-to-zero (RZ) (equivalent to 140-Mb/s nonreturn-to-zero (NRZ)) per channel is described. Ternary signals, in particular, alternate mark inversion (AMI) encoded signals, are widely used in telephone interoffice digital-transmission systems. This chip could be used in an asynchronous cross-connection system at the DS3 (44.736-Mb/s) signal level. This crosspoint chip has 16 input and 16 output channels. Any input can be connected to any output or outputs without blocking. The architecture allows for paralleling many chips to increase the size of the crosspoint array and also for cascading them to provide multistage switching capability. The switch can be addressed in the same way as a memory chip, and the cross-connection map can be written to and read back from the device. The chip is fabricated using a standard 2-μm CMOS technology, and the die size is 20.16 mm² (177.2×176.4 mil), containing about 11000 transistors     

A conformal cylindrical microstrip array for producing omnidirectional radiation pattern

Radiation patterns of rectangular microstrip patches arranged circumferentially on a circular cylinder have been computed. Both the axial patches and circumferential patches have been used. It has been found that the number of circumferential patches required for a given ripple in gain pattern is considerably less, thus simplifying the feed network. Comparison with experimental measurements shows good agreement.     

General Thin Rod Model for Preslip Bending Response of Strand

A general discrete thin rod model to study the preslip response of a strand of helical wires having wires-to-core friction contacts under constant curvature free bending has been developed for the case of Coulomb stick friction that considers together (a) all the three wire forces and three wire couples; (b) more appropriate equations for the wire shear forces; (c) the wire normal force as one of the contributors to strand bending moment; (d) wire external equilibrium; and (e) wire rolling with or without zero net shear on the strand cross section. The individual contributions of wire forces and couples to the strand bending moment for 10 models including EPRI model are compared. Several earlier models are shown to be special cases of the present general model.     

A support vector regression approach to detection in large-MIMO systems

We propose a support vector regression approach for symbol detection in large-MIMO systems employing spatial multiplexing. We explore the applicability of machine learning algorithms, in particular support vector machines, to address one of the recent research problem in communications.The machine learning capability is exploited to achieve fast detection in large dimension systems. The performance of the proposed method is compared with lattice reduction aided detection which is currently the popular choice and the improvement in terms of bit error rate is demonstrated. The sparse formulation of the problem matrix reduces the computational complexity and enables faster detection. The proposed detection algorithm is tailored to address both uncorrelated and correlated channel conditions as well.     

Quasi‐Continuous Wave Near‐Infrared Excitation of Upconversion Nanoparticles for Optogenetic Manipulation of C. elegans

Optogenetics is an emerging powerful tool to investigate workings of the nervous system. However, the use of low tissue penetrating visible light limits its therapeutic potential. Employing deep penetrating near‐infrared (NIR) light for optogenetics would be beneficial but it cannot be used directly. This issue can be tackled with upconversion nanoparticles (UCNs) acting as nanotransducers emitting at shorter wavelengths extending to the UV range upon NIR light excitation. Although attractive, implementation of such NIR‐optogenetics is hindered by the low UCN emission intensity that necessitates high NIR excitation intensities, resulting in overheating issues. A novel quasi‐continuous wave (quasi‐CW) excitation approach is developed that significantly enhances multiphoton emissions from UCNs, and for the first time NIR light‐triggered optogenetic manipulations are implemented in vitro and in C. elegans. The approach developed here enables the activation of channelrhodopsin‐2 with a significantly lower excitation power and UCN concentration along with negligible phototoxicity as seen with CW excitation, paving the way for therapeutic optogenetics.     

A Fast Hardware Approach for Approximate, Efficient Logarithm and Antilogarithm Computations

The realization of functions such as log() and antilog() in hardware is of considerable relevance, due to their importance in several computing applications. In this paper, we present an approach to compute log() and antilog() in hardware. Our approach is based on a table lookup, followed by an interpolation step. The interpolation step is implemented in combinational logic, in a field-programmable gate array (FPGA), resulting in an area-efficient, fast design. The novelty of our approach lies in the fact that we perform interpolation efficiently, without the need to perform multiplication or division, and our method performs both the log() and antilog() operation using the same hardware architecture. We compare our work with existing methods, and show that our approach results in significantly lower memory resource utilization, for the same approximation errors. Also our method scales very well with an increase in the required accuracy, compared to existing techniques.     

Prediction of Mass Transfer Coefficients in a Packed Bed using Tamarind Nut Shell Activated Carbon to Remove Phenol

Phenol is a refractive pollutant that is generated from almost all the types of industries. Removal of phenol can be achieved economically by using a cost effective technique like adsorption on to activated carbon. The present paper reports on the preparation and characterization of activated carbon from tamarind nutshell, an agricultural waste byproduct, and its use in a packed bed for the removal of phenol. The breakthrough curves for column sorption of phenol from aqueous solutions to TNSAC have been measured at various flow rates and different particle sizes at 28 °C. The results obtained showed that the sorption of phenol is dependent on both the flow rate and the particle size of the adsorbent, and that the breakpoint time and phenol removal yield decrease with increasing flow rate and particle size. The overall mass transfer coefficient is calculated from the experimental data and compared with the values obtained from the correlation. Experimental values are in excellent agreement with the predicted values from the correlation.