Comparison of different methods of modeling turbulent combustion in a boundary layer

Three methods of modeling a chemical reaction in the combustion of ethanol injected into the boundary layer through a porous plate are compared. In calculations of the average velocity and temperature and also heat-transfer coefficients, simple models of combustion are shown to be close in accuracy to a model that takes into complete account the kinetics of all reactions occurring during combustion. Simple models fail to determine the composition of reaction products, and it is necessary to take into account the formation rate of each substance entrained in combustion.Translated from Fizika Goreniya i Vzryva, Vol. 32, No. 4, pp. 37–42, July–August, 1996.     

Measurements of Stress Intensity Factors of an Interface Crack Under Mixed Mode Loading

The optical method of caustics has been utilised to measure both the stress intensity factor for a crack lying along the interface of an aluminium/epoxy bimaterial specimen, and the mode mixity arising from the difference in the elastic properties across the interface. Measurements were carried out by using a novel modification to the method whereby caustics are produced and measured from both sides of the specimen, so compensating automatically for the distortion induced in the specimen due to misaligned loading fixtures. A flat reflective surface across the interface was obtained by adhering a reflective coating to the specimen. Verification that this coating does not affect measurement accuracy was obtained by comparing stress intensity factors measured from coated and uncoated monolithic aluminium specimens where good agreement was found to exist between both measurements.     

Composition and thermodynamics of the surface layer of binary melts based on iron,cobalt, and nickel

The composition, thickness, thermodynamic activities of components, Gibbs energy and excess energy of formation of the surface layer on binary melts of iron, cobalt and nickel-based alloys with different interatomic interactions were evaluated with the aid of data from the literature and the authors measurements of the concentration dependence of the surface tension and molar volume.     

Analysis of thin walled structures using the boundary element method

In this article the direct boundary element formulations of stretching and bending plate problems are combined together to solve thin walled structures and other similar frames. The final system is obtained by assuming each individual plane structural element as a subregion. After the necessary transforms of these equations they can be combined together taking into account the displacement compatibility and equilibrium conditions.     

Base alumina ceramics with dispersoids: mechanical behaviour and tissue response afterin vivo implantation

Base alumina ceramics with dispersoids (BAC) are a new class of ceramics with improved mechanical properties as compared to pure alumina. They are obtained by dispersion of powder within an alumina matrix. Of the three new ceramics studied here, A20Z possesses the best mechanical properties as well as tribological properties superior to those of pure alumina whether it is used in ceramic-ceramic or ceramic-polyethylene combination.Mechanical behaviour and tissue response afterin vivo implantation were studied. Small four-point flexion bars obtained by pressureless sintering were implanted subcutaneously in the rat. The mechanical properties were unmodified even after one year from implantation.The tissue response was studied up to one year on cylinders implanted in the paravertebral muscles of Wistar rats, and was evaluated by qualitative examination of the encapsulating membrane and measurement of its thickness in relation to pure alumina. The tissue responses were comparable for both alumina and the three tested ceramics.     

Performance characteristics of a composite multivariate quality control system.

We present the results of an evaluation of the performance characteristics of a composite multivariate quality control (CMQC) system that incorporates quality control rules for univariate, multivariate, and correlation conditions. The CMQC system evaluated is designed to help analysts detect unacceptable trends and systematic error in one or more variables, unacceptable random error in one or more variables, and unacceptable changes in the correlation structure of any pair of variables. It is also designed to be tolerant of missing data, to allow analysts to reject as few as one or as many as all variables in a run, and to provide analysts with control statistics and graphics that logically relate to sources of analytical error. We show that the various components of the CMQC system have adequate statistical power to detect systematic errors, random errors, and correlation changes under the conditions likely to be encountered with multivariate analytical measurement systems: (1) a single variable with increased systematic or random error; (2) all variables or a subgroup of variables affected by a common problem that increases systematic or random error; and (3) missing data for one or more variables in a run. We also show that the power of the multivariate component of the CMQC system to detect systematic and random errors is higher than the power of an alternative multivariate test criterion.     

Alumina scale growth at zirconia-MCrAlY interface: a microstructural study

High-temperature oxide scale growth at the ceramic-metal interface is a major contributor to the thermomechanical resistance of thermal barrier coatings for hot stages of gas turbines. In order to better understand this phenomenon, microstructural observations of the alumina scales formed at 1100 and 1200 °C under air, between low-pressure plasma-sprayed NiCrAlY and air plasma-sprayed ZrO₂-8.5 wt % Y₂O₃, have been performed by classical and analytical transmission electron microscopy on transverse thin foil specimens. The evolution of the oxide grain morphology from the metal-oxide to the oxide-oxide interface suggests that the scale growth principally takes place at the metal-oxide interface. Segregation of yttrium at oxide grain boundaries has been detected as well as significant quantities of zirconium inside the alumina grains. The oxide growth seems to be dominated by a classical grain-boundary oxygen diffusion mechanism. The presence of zirconium inside the alumina grains also suggests that Al₂O₃ partially forms by chemical reduction of ZrO₂ by AI. The comparison between the microstructures observed and that of alumina scales grown under similar conditions on bare MCrAlY alloys gives some insight into how the ceramic top-coat modifies NiCrAlY high-temperature oxidation mechanisms.     

Excited-state-absorption cross sections and amplifier modeling inthe 1300-nm region for Nd-doped glasses

The performance of Nd³⁺-doped fibre amplifiers is limited by strong excited-state absorption (ESA) of the signal, and, even for fluorozirconate glasses, ESA prevents the important region below 1320 nm from being used. To quantify this limitation and explore alternative host materials, ESA and stimulated-emission cross sections have been measured for a representative group of glass compositions. These parameters have been used in an accurate fiber-amplifier model to provide the first quantitative comparisons of performance for Nd³⁺ -doped glasses in the 1300-nm band as a function of host