不确定混沌系统的动态神经网络跟踪控制

针对不确定非线性混沌系统，提出了一种基于动态神经网络辨识器的自适应跟踪控制新方法，通过滑模控制技术在线调整动态神经网络辨识器权值，并在获取动态神经网络模型的基础上设计出优化控制器，实现混沌系统的轨道跟踪，对辨识误差和轨道跟踪误差进行分析并证明了它们的有界性，Lorenz混沌系统的仿真实验结果表明了控制策略的有效性。     

Research of Grid Middleware Based on P-S

Study the technology of grid middleware based on P-S, and illustrates the interrelated-technical question in details,such as term-matching, location-transparency and fault-tolerance., so get better availability, flexibility and extendibility of the application.     

随机共振系统的电路模拟及在微弱信号增强传输中的应用

采用电子线路仿真双稳随机共振系统,建立微弱信号增强传输单元.实验结果表明,该装置适合于低信噪比条件下微弱正弦信号的检测,并且可以有效增强周期脉冲信号及二进制数字脉冲信号的传输,为微弱故障特征信号的提取以及数字信号的远程传输中提供了一种实用装置.     

通风除尘电机轴承内套热损伤疲劳断裂分析

某炼钢厂LF炉外精炼炉通风除尘电机轴承内套在运行过程中发生断裂 ,断裂源位于轴承内表面。用光学显微镜和扫描电镜对断裂件进行宏、微观检验。结果表明 ,电机轴承内套是由于润滑失效产生的热损伤疲劳断裂     

耒阳电厂200MW机组给水温度低原因分析及经济性计算

给水温度是影响电厂机组经济运行的一项重要指标．以热力试验为基础，分析了耒阳电厂200MW机组运行中给水温度低的原因，并应用等效热降法进行经济性计算，最后提出了改进措施．     

X20CrMoV121／Ⅲ厚壁减温器焊口的裂纹处理

通过对X20CrMoV121/Ⅲ(即F12)的Ⅱ级减温器焊口的裂纹处理,总结出了许多实际处理经验。     

推进资产证券化发展的本土化进程

在研究资产证券化发展状况的基础上，分析资产证券化在中国现有环境下所面临的许多实施上的障碍，提出了推进资产证券化本土进程的建议．     

3ds max中创建Camera Match点方法的探讨

通过创建一辅助长方体并对其进行变换，用其变换后的方向来反映3ds max中背景图像的透视方向，并利用其对场景与背景图像匹配的Camera Match点进行定位，为进行摄像机匹配提供了一种方便快捷、实用的新途径。     

铁固体超强酸催化剂的改性及结构特征

用沉淀法在一定条件下制备了由硫酸根促进的以氧化铁为主要活性组分的铁固体超强酸催化剂 ,并选择了氧化镧与氧化锆作为辅助金属氧化物添加剂进行了改性。用红外光谱测定了其分子结构 ,用流动气相色谱法测定了催化剂的比表面积和孔径结构。结果表明 ,铁固体超强酸催化剂的酸强度H0 ≤ - 1 4 5 2 ,比表面积为 1 2 4 8m2 ·g- 1 ,孔径集中在 1 0～ 2 0nm ,分子为桥式双配位结构。经改性后的催化剂用于乙酸丁酯的合成反应 ,有较高的催化活性和使用寿命。     

The effect of precipitation of Mg2Al3 and of MnAl6 on texture evolution during isothermal annealing and subsequently on formability of CC AA5182 Al alloy

Continuous cast (CC) AA5182 Al alloy with the precipitation of Mg₂Al₃ and of MnAl₆ was cold rolled to 70% reduction and then isothermally annealed in a salt bath at three temperatures (316, 343, and 371 °C) for different times. Texture evolution during recrystallization was investigated. It was found that the recrystallization textures of the material with intense Mg₂Al₃ precipitation along the grain boundaries exhibited weaker Cube, Goss and R/β fiber components than those of the material with the more uniform fine MnAl₆ precipitates. The opposite was true in the cold rolled condition, i.e. the material with MnAl₆ precipitation had weaker Cube, Goss, and R/β fiber components in the cold rolled condition than the material with intense Mg₂Al₃ precipitation. Thus, recrystallization textures of material with Mg₂Al₃ precipitation were weaker than material with MnAl₆ precipitation. This is due to the fact that large Mg₂Al₃ particles favor the nucleation of randomly oriented grains. When subjected to formability tests, the material with prior Mg₂Al₃ precipitation displayed a lower anisotropy in tensile yield strength, ultimate tensile strength, elongation, and strain hardening exponent than material with prior MnAl₆ precipitation. This is in accord with the texture results which indicated that the recrystallization textures of material with an initial Mg₂Al₃ precipitation were closer to those of a perfectly random sample than those of material with an initial MnAl₆ precipitation. On the other hand, the elongation and Olsen values were lower and the surface quality after bending tests was worse for material with Mg₂Al₃ precipitation. This is due to the non-uniform distribution of Mg₂Al₃ particles which precipitated primarily along the grain boundaries and caused an earlier formation and coalescence of the microvoids around the grain boundary precipitates. The forming limit diagrams (FLD) correlated well with the tensile, Olsen and bending results.