微电量测量中信号的拾取和放大

本文介绍了静电计级运算放大器在工业微电量测量中的应用,并且给出了实际的电路结构和相关的噪声解决办法。     

核孔膜生产线膜微孔制备工艺实验研究

本文介绍核孔膜生产线,重点描述了膜微孔制备工艺的实验研究。对于PC和PES膜,已得到32种工况下的扩孔公式,其形式为D=A+Bt,其中D——孔径,t——扩孔时间,A,B为特定工艺参数下的常数值.通过实验。得到了膜孔密度N与300~#核反应堆功率P、热柱辐照位置L的经验公式,即N=6.97×10~5×10~3×101~(1.18L).在本生产线上可生产最大幅面为3 140mm×240mm,孔径为0.04～10 μm的多系列多规格的核孔膜产品。     

氧化锌压敏陶瓷烧结致密化过程的研究

本文研究了氧化锌压敏陶瓷的致密化过程，结果发现只有当烧结温度升高到一定值时，试样中的ＺｎＯ粉粒产生聚集，致密化过程才开始．致密化是瓷体获得稳定电性能的基础．低熔点添加剂Ｂ２Ｏ３可以降低致密化的起始温度，而致密化过程中的等温烧结对ＺｎＯ压敏陶瓷的最大密度几乎没有影响．     

装备工作性能模糊评判新方法

阐述了虚拟样机技术的优越性及其在机械系统研究领域应用中的必要性,总结了火炮可靠和安全工作的三个基本准则.将模糊的观点引入到火炮研究领域,定义了单因素与火炮工作性能等级间的隶属度函数,建立了基于虚拟样机的火炮工作性能模糊综合评判模型.     

SH/T3083-1997《石油化工钢储罐地基处理技术规范》的编制背景和内容简介

中国石油化工总公司批准发布的《石油化工钢储罐地基处理技术规范》自1998年3月1日起施行，本文作者作为主要编制工作负责人，在对该规范内容予以简要介绍的同时，对该规范的编制过程和特点进行了深入说明，以利其在石代储罐建设工程中发挥应有的效益。     

混沌电路同步的研究

本文叙述对混沌电路实现同步控制的实验研究之初步结果。所用的电路为蔡氏电路和锁相环电路。这项研究工作在通信系统中有应用前景。     

基于感知器的快速彩色图像无损压缩算法

针对彩色图像像素和颜色分量之间存在的相关性，将神经网络中的感知器技术引入彩色图像的无损压缩算法中，提出了一种新的预测模型。应用感知器的自学习和自适应能力，对预测值进行自适应调整，使算法在运行过程中具有很小的预测残差并具有较小的动态范围。同时应用颜色空间变换来减小颜色分量间的相关性。相对于新的国际标准JPEG—LS，这种预测模型具有较低的计算复杂性。对比实验结果说明，这种算法的性能明显优于传统算法，在压缩比损失很小的前提下，其执行速度高于JPEG—LS。     

Structure evolution of conductive polymer composites revealed by solvent vapor induced time-dependent percolation

The authors of this paper synthesized a series of amphiphilic triblock copolymers of polystyrene-b-poly(ethylene glycol)-b-polystyrene (PS-PEG-PS) having different PEG/PS ratios with nearly identical molecular weights of the entire copolymers. The interfacial interactions in the composites consisting of carbon black and the copolymers can thus be tailored. When these conducting composites are exposed to certain solvent vapors, their electrical resistances greatly increase, showing the gas sensitivity. The present work indicated that this switching behavior is controlled by the structural relaxation of the composites because matrix swelling acts as the main mechanism. The response time has been correlated with absolute temperature by Arrhenius equation, and the estimated activation energy reflects mobility of the fillers involved in the solvent induced expansion of the surrounding polymer. Therefore, by using the gas sensibility of the conductive composites, the structure evolution of the composite materials in solid state and the effect of filler/matrix interfacial interaction on the relaxation property of the matrix polymer has been inspected. It was found that lower activation energy represents stronger interfacial interaction in case good solvent of the matrix was used for the test.     

Novel blood-compatible waterborne polyurethane using chitosan as an extender

A series of novel block polymers of polyurethane (PU) and chitosan have been prepared in two steps. The first step is the preparation of PU prepolymer, obtained from polytetramethylene oxide glycol (PTMO, M_n = 1000), isophrone diisocyanate (IPDI), and 2,2′-dimethylol propionic acid (DMPA), followed by ionizing PU prepolymer with triethylamine (TEA). The second step involves PU chain-extended by water-soluble chitosan of low molecular weight (M_n = 5000) by self-emulsion polymerization method. The sizes of the latex particles, morphology, and copolymer architecture have been characterized by dynamic light scattering (DLS), general tensile test, infrared spectroscopy (IR), surface contact angle measurement, and transmission electron microscopy (TEM). Furthermore, it shows that the addition of chitosan remarkably increases anticoagulative property of PU elastomers confirmed by the recalcification time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008