制药工程新专业的建设

我校药学院在创办和建设制药工程专业过程中,通过对国内外该学科的调研和有关专家的论证,确立了制药工程专业的性质、内涵、定位、培养目标、业务要求、专业知识结构与课程体系和创新能力培养,并且在学科建设方面也取得了一些进展.     

Rapid Reactive Synthesis and Sintering of Submicron TiC/SiC Composites through Spark Plasma Sintering

Submicrometer TiC/SiC composites were fabricated by a rapid reactive sintering process through spark plasma sintering (SPS) technique using the carbon, titanium, and nanosized-SiC powders without any additive. It was found that the composite could be sintered in a relatively short time (8 min at 1480°C) to 97.9% of theoretical density. After sintering, the phase constituents and microstructures of the samples were analyzed by X-ray diffraction techniques and observed by scanning electron microscopy. The effect of nanosized and microsized SiC additives on the microstructure of TiC/SiC composites was investigated.     

Study on corrosion resistance and roughness of micro-plasma oxidation ceramic coatings on Ti alloy by EIS technique

Micro-plasma oxidation (MPO) technique has been developed quickly in recent years. The produced ceramic coatings are reported to possess fine properties and promising application prospects in many fields. The aim of this work is to study the corrosion resistance and the roughness of the micro-plasma oxidation ceramic coatings on Ti alloy by electrochemical impedance spectroscopy (EIS) technique. Compound ceramic coatings were prepared on Ti-6Al-4V alloy by pulsed bi-polar micro-plasma oxidation in NaAlO₂ solution. The phase composition and element distribution in the coating were investigated by X-ray diffractometry and electron probe micro-analyzer. EIS of the coatings was measured through CHI604 electrochemical analyzer in 3.5% NaCl solution. The ceramic coating is composed of a large amount of Al₂TiO₅ and a little α-Al₂O₃ and rutile TiO₂. The coating is of double-layer structure with the loose outer layer and the dense inner layer. The thickness of the coatings is reduced when the working frequency or the cathode pulse current density is increased, while the thickness is increased when the frequency or the anode current density is increased. The established “equivalent circuit” of the coatings is consistent with the double-layer structure. The electric charge transfer resistance (R_t) in the equivalent circuit can be used to assess the corrosion resistance of the coatings, which is consistent with the result of the polarizing curves test. And the empirical exponent (n₁) of the constant phase element (Q₁) in the equivalent circuit can be used to assess the surface roughness of the coatings, which is consistent with the surface SEM analysis of the coatings.     

超临界萃取技术在生物碱提取中的应用进展

超临界流体萃取技术具有选择性好、收率高、工艺简单、操作条件温和、绿色环保等优点,已被广泛应用于中草药的提取分离中。以生物碱的生物活性分类,综述了超临界萃取技术在各种天然生物碱提取中的应用研究现况及其特点。针对超临界萃取技术在提取生物碱中的发展前景及目前所存在的问题进行分析讨论。结果表明,它能够有效地从植物中提取或分离出生物碱,且与其它的分离手段相结合将是天然药物生物碱今后的提取分离发展方向。     

Thermal degradation behaviors of polypropylene with novel silicon‐containing intumescent flame retardant

The N‐[3‐(dimethoxy‐methyl‐silanyl)‐propyl]‐N′‐ (9‐methyl‐3,9‐dioxo‐2,4,8,10‐tetraoxa‐3,9‐diphospha‐spiro[5.5]undec‐3‐yl)‐ethane‐1,2‐diamine/dimethoxy dimethyl silane copolymer (PSiN II), which simultaneously contains silicon, phosphorus, and nitrogen, is synthesized and incorporated into polypropylene (PP). The flame retardancy is evaluated by the limiting oxygen index value, which is enhanced to 29.5 from 17.4 with 20% total loading of PSiN II. The thermal degradation behavior of PP/PSiN II is investigated by thermogravimetric analysis under N₂ and air. The PP/PSiN II sample degrades at 400°C for different amounts of time, and the process of degradation is studied by Fourier transform IR. The morphology of the char formed at 400°C for 10 min is investigated by scanning electron microscopy. The swollen inner structure, close, and smooth outer surface provide a much better barrier for the transfer of heat and mass during fire and good flame retardancy. The thermal stability of PP is improved by incorporation of PSiN II. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2487–2492, 2005     

Micro-Indentation Fracture Toughness Evaluation with a Novel Microscopy

A novel microscopy is developed for evaluating the fracture toughness of thin ceramic sheets using the micro-indentation method. This microscopy overcomes the theoretical limit of measurement resolution associated with optical microscopes. Using a modified optical microscope, the crack lengths produced by micro-indentation on the surface of an as-fired ceramic sheet can now be measured. Experimental results on an 8 mol% yttria-stabilized zirconia ceramic substrate show that the accuracy of the fracture toughness evaluation is satisfactory. This micro-indentation fracture toughness evaluation method is efficient and economical for thin ceramic substrate surfaces, either polished or as-fired.     

动态固化聚丙烯/马来酸酐接枝三元乙丙橡胶/环氧树脂共混物

将动态固化法成功地应用于聚丙烯／环氧树脂共混体系中，加入马来酸酐接枝三元乙丙橡胶后不仅增加了聚丙烯／环氧树脂共混体系的相容性，而且提高了聚丙烯基质的韧性。固化的环氧树脂颗粒提高了聚丙烯基质的刚性。动态固化聚丙烯／马来酸酐接枝三元乙丙橡胶／环氧树脂共混物的刚性和韧性达到了很好的平衡。     

电泳涂料

本文介绍了电泳涂料及发展趋势。     

无润滑空气压缩机冷却水系统的清洗

介绍了无润滑空气压缩机冷却水系统结垢的危害性，阐述了清洗的原理，提出了清洗时应注意的工艺参数，操作时的注意事项和由此带来的经济效益。