一种实验炼钢渣的穆斯堡尔谱研究

一种实验炼钢渣不同炉次样品的室温透射穆斯堡尔谱由两组裂距较大的四极分裂双峰和一组裂距较小的双峰组成，它们分别相应于具有不同微观环境的Ｆｅ＾２＋和Ｆｅ＾３＋。参照文献中已知ＦｅｘＯ的穆斯堡尔谱数据，可确定该渣中的主要含铁相为ＦｅｘＯ。Ｘ射线衍射相分析给出相同的结果。按亚谱的面积比计算出Ｆｅ＾２＋和Ｆｅ＾３＋的相对含量分别为８５％和１５％左右。进一步选取与样品晶体结构相联系的原子簇模型。用ＭＳ－Ｘａ方     

机械合金化Fe50Ti50非晶的形成及球磨强度对它的影响

本文通过电子扫描和Ｘ衍射对机械合金人Ｆｅ５０Ｔｉ５０非晶粉末形成做了研究。研究发现：机械合金非晶形成可以大致地分为二个阶段－粉末的破碎阶段和非晶的形成阶段。另外，对球磨强度对非晶形成的影响进行了研究。结果表明：强度低时粉末需要较长的时间才能形成非晶，强度高时粉末形成非晶的时间大大缩短，但在随后的球磨中，粉末会重新晶化形成新相。     

Topology and Stability of Trivalent Polyhedral Clusters

An algorithm to generate the molecular graphs of the trivalent clusters is presented. All the polyhedral trivalent cages with 4-16 vertices are enumerated, with particular attention being given to their symmetry, spectra and stability. The relative stability of isomers is not decided solely by their symmetry. A new kind of spectral phenomenon is reported. This is the occurrence of graphs having the same HOMO-LUMO gap, the same E and the same even-order moments. We refer to it as 'pseudo-isospectrality'.     

鞍钢1780mm热轧生产线"三电"工程施工概述

概述了鞍钢1780mm生产线技术改造工程中供电、传动及自动控制系统的构成、安装及调试技术要点,以及技术经济效果评述,可供同类工程施工参考.     

A Subcarriers Allocation Scheme for Cognitive Radio Systems Based on Multi-Carrier Modulation

Cognitive radio (CR) is a dynamic spectrum access technology as a solution to spectrum under-utilization problem in some licensed bands. Operating over an exceedingly wide spectrum, CR systems usually adopt multi-carrier modulation (MCM) to implement flexible channelization. Consequently, efficient channel allocation scheme becomes extremely important to an MCM based CR (MCM-CR) system. In this paper, a maximum likelihood detection model is developed to detect the presence and locations of licensed users (LUs) signals in the frequency domain. Performance of the detection model, including the optimal detection region, detection probability and false alarm probability, is analyzed. A one-order two-state Markovian chain model is proposed to predict channel status information. In particular, a novel subcarrier allocation scheme for MCM-CR systems is proposed, taking into account the confidence of channel estimation, quality of services (QoS) of rental users (RUs) and throughput. To validate the analytical results, simulations have been conducted to show effectiveness of the proposed scheme.     

Hydriding and Dehydriding Characteristics of Mechanically Alloyed LaMg_(17) Ni Composite Material

Magnesiumandmagnesiumalloyshavebeenin vestigatedashydrogenstoragematerialsforseveralde cadesbecausefarmorehydrogenbyweightcanbestoredinthemthaninmostoftheothercurrentlyknownhydrogenstoragealloys .Moreover ,thehighnaturalabundanceofMg ,itslightmassandenviron mentalcompatibilitypotentiallymakemagnesiumoneofthemostprospectivecandidatesforfuturehydrogenstoragematerials .Unfortunately ,thepracticalappli cationofMganditsalloyshasbeenlimitedonlytocertainstoragedevicebecauseoftheirpoorhydriding dehydr…     

Freestanding Alumina Membrane by Double-Layer Anodization

A novel method has been developed for fabricating full or partial freestanding anodic alumina. In our method a sacrificial metal layer is introduced between an Al film and a Si₃N₄ substrate. A freestanding alumina film at wafer scale is successfully achieved by anodizing the double metal layer, during which the alumina is spontaneously stripped off the Si₃N₄ substrate due to the anodic oxidation of the sacrificial layer. The barrier oxide of the alumina film is effectively removed either by H₃PO₄ dissolution or by CF₄ reactive ion etching. The freestanding alumina film is utilized as a contact mask to transfer its nanoporous pattern to a Si substrate. By patterning the sacrificial metal layer with contact lithography, a partial freestanding alumina film is successfully achieved on the silicon chip, producing a unique micro/nanofluidic channel. Compared with previous techniques, the method reported here is advantageous for its simplicity and flexibility     

A Microfluidic Device to Acquire Gaseous Samples Via Surface Tension Held Gas-Liquid Interface

We present a relatively simple and effective method for acquiring gaseous samples into microfluidic channels. Hydrophobic polymers are photopatterned on hydrophilic substrates. Due to surface tension, aqueous liquid is confined by the hydrophobic polymers, but not completely blocked by a physical wall, thus allowing an interface for gas-liquid interaction. Here, the mechanism is demonstrated by using hydrophobic (poly)iso-bornyl acrylate polymer patterns on hydrophilic glass substrates, and through a Nessler's reagent-ammonia reaction that exhibits changes in color and electrical resistance.