Preparation and properties of close-packed composite materials

Monodisperse silica particles of about 0.3m diameter are suspended in methacrylate monomer using a carefully selected dispersant. Many steric dispersants are hydrocarbon chains with a reactive end-group. These are not effective as dispersants for silica in moderately polar solvents, such as esters and the methacrylate monomers. Good dispersion was obtained with a methacrylate polymer terminated by a chlorosilane end group. Settling or centrifugation of these unagglomerated dispersions gives well-packed particle beds. Polymerization of the surrounding monomer produces composite materials with high packing fractions and a high degree of regularity. Moduli and strengths of these composites are reported.     

单片机在木板自动剪切机中的应用

由于某厂生产各种规格木板的十多台设备专机,全靠人工手动操作的问题。这些设备与现在日益发展的工业自动化设备相比存在着很大的缺陷。本文利用AT89C51单片机进行控制,并在原设备工作台上加装一台三相异步电动机和一条木板送料传送带,使得工人不用在车间工作就可以控制整个生产过程。显著提高了企业生产效率,达到降低生产成本的效果。     

数字化校园数据备份体系建设探索

随着高校信息化建设的推进,特别是数字化校园的广泛应用,重要数据越来越多地集中存储于学校数据中心。如何保障数据的安全成为亟待解决的问题。数据备份是确保数据安全的重要措施,本文分析了数据备份面临的挑战及应对方法,介绍了数据本地、异地备份的常用方法,设计了一套实用的异地数据灾备体系,并对未来的技术发展进行了展望。     

电子和β射线两用外推电离室的研制

本文研制了一台测量电子束和β射线吸收剂量的外推电离室,其空腔室壁材料可拆换并分别与空气、组织和硅等效,收集电极名义直径为1.5、3、10和30mm,空气空腔可变范围为0.2～15mm。该外推电离室具有在空腔内部测温,自动改变窗口上方材料厚度及采用微型计算机控制等特点。适用于测10 MeV能量以下,剂量率为10~5～10~(-3)Gy/h的电子或β射线吸收剂量。整个外推电离室自动测剂量系统在测~(204)TLβ放射源表面剂量率的不确定度为2.3％。测1.5 MeV电子束在硅和哈密瓜深部剂量率时,不确定度分别为4.0％和2.8％。     

Adsorption characteristics of hexadecyl ammonium with different numbers of carbon chains in montmorillonite and the structure of the prepared composites

Journal of Porous Materials - The dynamics and thermodynamics of adsorption of hexadecyl ammonium with different numbers of carbon chains in montmorillonite (Mt) with different layer charge density...     

THE EFFECT OF FURNACE ATMOSPHERE DUE TO COMBUSTION UPON HYDROGEN CONTENT IN LIQUID STEEL

<正> 在炼钢过程中,炉气中水汽是钢液中含氢的主要来源。就平炉而言,除了空气湿度和炼钢原材料带入炉中的水分以外,还有煤气燃烧生成的水汽。根据过去的研究结果,由于空气湿度直接或间接引起的水汽分压,一般波动于0.01—0.08个大气压之间,而煤气燃烧废气中的水汽分压则经常在0.1个大气压以上,有时甚至可以超过0.2     

AN EXPERIMENTAL-NUMERICAL METHOD FOR MEASURING CRACK PROPAGATING VELOCITIES UNDER STRESS WAVE LOADING

An experimental-numerical method for measuring dynamic crack propagating velocities under stress wave loading is established in this paper. The experiments of the three-point bend specimen are done on the improved Hopkinson bar. Deflection of loading point, dynamic load and instantaneous crack length are measured, then crack propagating velocities are calculated. Experiments on 40Cr steel show that the results given by this method have a good agreement with that obtained by the resistance fracture gage method. Therefore this method is feasible for measuring crack propagating velocities under high loading rate and will have wide application.     

CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING

The microstructure,alloying reaction and sintering behavior of the powder produced by Mechanical Al-loying(MA)for 8 h from 64 wt.-% Ti powder and 36 wt.-% Al powder were studied by scanning electronmicroscopy,optical microscopy,X-ray diffractometry,differential scanning calorimetry(DSC)and dilatometry.The mechanically alloyed powder partictes are Ti-Al composite particles.Thus,titanium aluminides can formeasily in the powder through diffusion during heat treatment.It is shown that the sintering behavior of this pow-der,different from the behaviors of TiAl alloy powder and mixed powder of 64 wt.-% Ti powder and 36 wt.-%Al powder,changes from expansion at temperatures below 1000℃ to shrinkage at temperatures above 1000℃.Homogeneously alloyed TiAl material with a density over 96% of the theoretical density can be produced fromthe mechanically alloyed powder by compaction-sintering.     

非线性滤波在射线图像降噪增强中的应用

射线数字成像是当前射线检测与诊断技术发展的方向，图像降噪增强是提高射线成像检测灵敏度和分辨力的关键。重点探讨以排序滤波为代表的非线性滤波图像降噪增强方法，对射线图像的处理表明，线性滤波在降噪的同时会引起较大的边级模糊，而排序滤波不仅降低噪声且能保持图像细节，提高图像质量效果明显。