成品油汽运发货系统的研究与开发

介绍成品油传统汽运发货流程.指出其中的弊端,提出采用计算机网络化管理的思路,并对计算机成品油汽运发货系统的优点和功能进行了介绍,然后详细讨论了该系统的开发过程和功能实现,最后提出改进和发展方向。     

为了满足使用者需求而设计——上海地铁研究·使用者需求

在上海地铁研究中,我们发现了许多使用者的不满。这些不满来自于设计师对使用者的缺乏了解和缺乏关注。通过对上海地铁真实的使用者、真实的地点和真实的时间的调研,我们分析出25项上海地铁使用者的需求。并提出希望设计师能够从这些使用者的需求出发,去作为使用者带来良好体验的设计。     

吸入短寿命氡子体动物肺组织剂量与体重关系的探讨

本文介绍吸入短寿命氡子体的不同种动物肺组织吸收剂量与体重的关系。实验结果表明,吸收剂量随体重的增加而减小。     

巯基棉预浓集—中子活化法测定水泥及其浸出水中的微量汞

在不同酸度下巯基棉可以从溶液中富集和分离Au、As、Ag、Br、Cu、Ca Co、InHg、Ni、Se、Sb、Sn、Pb、W、Fe和In等30多种元素。由于用巯基棉吸附待测元素后不必洗脱,因此大大提高了富集能力,可用于海水、地下水、地表水及工业废水中一些元素的测量。本文用巯基棉富集后进行中子活化分析测定水泥及其浸出水中的汞。     

北魏至北周时期的河东盐业经济活动

历史上,北魏、西魏、北周政权对河东盐池的管理,颇多变化,时而设官劝盐,征税通商;时而废除盐池管理机构,放任自流,让商人无税经营。尤其是在北魏时期,无常例,无定制,盐政较为混乱,为后世所戒。不过,北魏——北周时期,都强调"通商货盐",食盐流通较为正常。在处理讼案和护池工程方面,也有可取之处。同时,解池的盐民还创造出了"垦畦浇晒"食盐的新技术,开辟了食盐生产的新途径,对后世产生了很大影响。     

Motion patterns of Nabesna Glacier (Alaska) revealed by interferometric SAR techniques

Nabesna Glacier is one of the longest land-terminus mountain glaciers in North America. However, its flow has never been studied. We derived detailed motion patterns of Nabesna Glacier in winter and spring 1994–1996 from the synthetic aperture radar (SAR) images acquired by the European Remote Sensing satellites (ERS-1 and ERS-2) using interferometric SAR (InSAR) techniques. Special effort was made to assess the accuracy of the motion estimates, and remove data points with high uncertainty from the motion profiles, enabling us to obtain reliable glacier flow patterns along the highly curved main course of Nabesna Glacier. The results, covering 80 km of the 87 km main course of the glacier, were used to delineate four distinctive sections in terms of spatial and temporal variability of the glacier speed: (1) the upper section where glacier flow was apparently random both temporally and spatially presumably due to development of crevasses; (2) the upper-middle section with relatively steady flow around 0.27 to 0.4 m/day; (3) the middle section with a stable pattern of acceleration from 0.27–0.3 m/day to the maximum about 0.67–0.73 m/day, followed by a general deceleration to 0.17–0.33 m/day before reaching (4) the lower section where the glacier motion was generally slow yet highly variable although uncertainty in the estimation is high. Occurrence of the flow maximum, as well as many local maxima and minima at consistent locations over different periods suggests that the valley geometry affect the overall flow pattern. On top of this general trend, many small-scale temporal/spatial variations in the glacier flow patterns were observed along the glacier, especially in the lower sections. On average, the flow speeds were in the range of 0.3 to 0.7 m/day; however this lacks any measurements of summer flow speeds which are expected to be significantly higher.     

Residual Stress Simulation of Injection Molding

In this study, distribution and history of residual stresses in plaque-like geometries are simulated based on linear thermoviscoelastic model, which helps to understand the mechanics and evolution of the residual stresses in the injection molding process. The numerical calculation of direction, combined with the specified boundary conditions. Results show that the stress variation across the thickness exhibits a high surface tensile value changing to a compressive peak value close to the surface, with the core region experiencing a parabolic tensile peak. Residual stress distribution throughout the thickness is almost same along the flowpath and the final residual stresses value near the gate is lower than the value near the end of flowpath.