Meta photonic crystal paper devices

Science China Technological Sciences -     

一种基于传感器数据综合处理算法

提出基于知识参量的数据标准化处理方法,介绍了知识参量的构成以及故障征兆的隶属度表示方法.根据功率相等的原则提出了传感器数据中的野值滤波方法.运用神经网络和最小二乘法加权的方法对缺损数据进行填充,并分别与最小二乘法和BP网络的处理结果进行比较.仿真结果表明,运用该方法进行数据处理,可以在保证数据完整准确的情况下,有效地弥补原始数据的缺陷,提高了数据的准确性和可信度.     

多功能结构在固体火箭上的应用分析

为实现固体火箭轻质化设计,采用传统机械结构优化的方法能力十分有限。多功能结构优化设计方法,由于采用机、电、热一体化的系统工程级设计思路,为提升火箭整体性能开辟了一个全新的方向。介绍多功能结构设计方法及思路,结合一种新型箭载记录设备原型样机的研制,对多功能结构在固体火箭领域应用的前景进行深入探讨。     

Effect of Drying on Particle Size and Sensitivities of Nano hexahydro-l,3,5-trinitro-l,3,5-triazine

Nano hexahydro-l,3,5-trinitro-l,3,5-triazine （RDX） was prepared using a bi-directional rotation mill and dried under different conditions （liquid, temperature and drying）. It shows that the samples cake seriously and the particles grow up obviously by ordinary drying in different liquids at 70 ℃, which occurs again after vacuum drying. With the increase of temperature, the degrees of caking and aggregation are enhanced. Well dispersed sample maintaining constant particle size is extracted by supercritical drying, especially freeze drying. Furthermore, the me- chanical sensitivities of I-RDX, O-RDX and F-RDX, of which the average sizes are 88.03 μm, 15.32 μm and 0.16 μm, respectively, are evaluated. Compared with I-RDX, the friction, impact and shock sensitivities of O-RDX are slightly lower. However, the friction, impact and shock sensitivities of F-RDX are reduced by 30%, 99.0% and 59.9%, respectively.     

Biocompatible electrospun tactic poly(methyl methacrylate) blend fibers

Uniform and beads free fibers of pristine syndiotactic PMMA (s-PMMA), isotactic PMMA (i-PMMA), and their blends in the ratio of s:i = 3:1, 1:1 and 1:3 were successfully prepared using the electrospinning technique. The tactic PMMA blend fibers showed unique thermal stability and glass transition temperatures compared to their pristine counterparts. An interesting endotherm peak was observed for the s:i = 1:3 electrospun fibers, which might indicate a complex formation between the two tactic PMMAs. Systematic surface functionalities study by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) revealed the interactions between these two tactic PMMAs. Biocompatibility of tactic PMMA and their blend fibers was first time comparably investigated using HeLa as the model mammalian cell line; an intriguing observance was first revealed that the blend fibers showed better biocompatibility than both pristine ones, though the behind mechanism is not well understood yet.     

TiB2 Powders Synthesis by Borothermal Reduction in TiO2 Under Vacuum

TiB₂ powders were synthesized by borothermal reduction in nanoscale TiO₂ with boron under vacuum. Reaction processes were investigated, and the effect of by‐product B₂O₃ was evaluated. Results showed that TiO₂ was firstly reduced by boron to form TiBO₃ and Ti₂O₃, and then to produce TiB₂ and B₂O₃ with increasing temperature. The reaction processes of TiB₂ powders synthesis included two‐step reduction in TiO₂ by boron and the removal of B₂O₃. The presence of B₂O₃, which was previously reported as the most important factor in promoting the coarsening of ZrB₂ and HfB₂ powders by borothermal reduction, did not lead to significant coarsening of TiB₂ powders. Due to the minor effect of B₂O₃, TiB₂ powders with small particle size and low oxygen content could be prepared by direct heat treatment of TiO₂ and boron at 1550°C under vacuum for 1 h. The particle size and oxygen content of synthesized TiB₂ powders were ~0.9 μm and ~1.7 wt%, respectively.     

Sintering Behavior and Dielectric Properties of Ultra‐Low Temperature Fired Silver Molybdate Ceramics

Ag₂MoO₄ ceramic was prepared by using the solid‐state reaction method, which could be sintered at 450°C for 2 h, having a relative permittivity of 8.08, a Qf value of 17 000 GHz, and a temperature coefficient of resonance frequency about ?133 ppm/°C. Ag₂MoO₄ ceramic was chemically compatible with silver but reacted seriously with aluminum to form (Ag_0.5Al_0.5)MoO₄ during the sintering. The fitting of infrared spectra and the Shannon's additive rule were employed to study intrinsic dielectric behaviors of the ceramics at microwave region. Ionic displacive polarization and the electronic polarization contributed almost equally to the dielectric permittivity of the ceramic at microwave region. The Ag₂MoO₄ ceramics could be a good candidate for ultra‐low temperature co‐fired microwave devices.     

A New Ferroelectric Phase of YMnO3 Induced by Oxygen‐Vacancy Ordering

Manganese oxides are good candidates of strongly correlated electron materials due to the uniqueness of electronic structure of manganese and the mobility of oxygen among lattice sites under external impacts. Here, we used electron beam as the excitation source to explore the structural evolution of YMnO₃ and identified a new phase under the radiation of electron beam in the transmission electron microscope. Analyses of the electron energy‐loss spectra reveal that this phase originates from ordered oxygen vacancy. We applied the first principles calculation to pick out the optimized stable structure with a lower polarization, and verified its correctness by electron diffraction and image simulations. Analyses of density of states indicate that weak Y–O covalence is favorable for the existence of ferroelectricity, supporting the electrostatic nature of ferroelectricity in the YMnO₃.     

Char barrier effect of graphene nanoplatelets on the flame retardancy and thermal stability of high‐density polyethylene flame‐retarded by brominated polystyrene

Graphene nanoplatelets (GNPs) with the char barrier effect were combined with brominated polystyrene (BPS) and antimony trioxide (Sb₂O₃) to improve the flame retardancy and thermal stability of high‐density polyethylene. Thermogravimetric analysis, limited oxygen index (LOI) testing, and vertical burning testing (UL‐94) showed that the presence of GNPs led to enhanced thermal oxidation stability and significantly reduced the flammability. The addition of 1 wt % GNPs to polyethylene/BPS–Sb (mass ratio = 92/6/2) led to UL‐94 grades from NG (first burning time > 30 s) to V‐2 (total burning time = 14 s), and the LOI value increased from 23.4 to 24.1%. The results of the pyrolysis products provided evidence that the GNPs restricted volatilization. The morphology of the chars also proved the formation of the char layer, which could act as a barrier to isolate the material from the flame and retard the vaporization of flammable gases via a tortuous pathway. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40520.