Comparisons of PWM and one-cycle control for power amplifier with multilevel converter

Based on the concepts of cascade multilevel converters and one-cycle technique, comparisons are conducted to characterize the distortion of the pulsewidth modulation (PWM) and one-cycle control methods that were applied to converters. Simulation results for the different control schemes are obtained in PSIM software initially to see the effect of one-cycle control different from that of PWM control. Through the comparisons, the advantages and disadvantages are identified for each method. The one-cycle scheme is better than PWM control in reducing undesirable harmonics and tracing dynamic waveforms. Simulation and experimental results are also provided to verify the conclusions.     

新型哈氏合金G—30的耐蚀性能与工业应用

文章叙述了新型镍基耐蚀哈氏合金G-30在不同介质中的耐蚀性能以及工业应用,综合分析了该合金应用的经济性及前景。     

An implementation of the vectorial finite element analysis ofanisotropic waveguides through a general-purpose PDE software

This paper reports on the major progress in the development of an intelligent, interactive and automated system, based on the vector finite element method, and implemented within PDE/Protran problem solving environment. The system is known as WAVEGIDE and was originally developed by the authors for an efficient solution of inhomogeneous dielectric waveguides. In this paper, it has been further extended to the solution of anisotropic waveguiding structures. With our system, through an interactive “question-and-answer” session, which requires minimal knowledge of programming, the problem can be defined using high level PDE/Protran commands. It can then be simply and quickly solved by the main processor within this intelligent environment. To verify the convergence and accuracy of the present approach, numerical results (with respect to the grid density and element order) for a rectangular metallic waveguide half filled with dielectric are given and compared with other finite element methods. Numerical results for an anisotropic dielectric rectangular waveguide are also presented. These results clearly illustrate the accuracy and the ease of use of the modified WAVEGIDE program     

硼酸使掺铁铝酸锂发光增强的现象

在硼酸存在下合成了掺铁铝酸锂荧光体,研究了在不同温度下硼酸加入量对荧光体发光强度的影响,并通过X射线粉末衍射和粒度分析,初步探讨了发光增加的原因。     

利用线阵CCD实现宽波段、大视场短脉冲激光波长的远场测量

介绍了一种利用线阵ＣＣＤ实现宽波段、大视场脉冲激光波长及方向远场测量的原理和实验装置；对强烈背景下激光信号的提取与处理方法进行了理论分析和实验研究，给出了系统信噪比与探测器件工作频率的理论公式；最后简要介绍了远场实验和测试结果     

Non‐reflecting artificial boundaries for transient scalar wave propagation in a two‐dimensional infinite homogeneous layer

This paper presents an exact non‐reflecting boundary condition for dealing with transient scalar wave propagation problems in a two‐dimensional infinite homogeneous layer. In order to model the complicated geometry and material properties in the near field, two vertical artificial boundaries are considered in the infinite layer so as to truncate the infinite domain into a finite domain. This treatment requires the appropriate boundary conditions, which are often referred to as the artificial boundary conditions, to be applied on the truncated boundaries. Since the infinite extension direction is different for these two truncated vertical boundaries, namely one extends toward x →∞ and another extends toward x→‐ ∞, the non‐reflecting boundary condition needs to be derived on these two boundaries. Applying the variable separation method to the wave equation results in a reduction in spatial variables by one. The reduced wave equation, which is a time‐dependent partial differential equation with only one spatial variable, can be further changed into a linear first‐order ordinary differential equation by using both the operator splitting method and the modal radiation function concept simultaneously. As a result, the non‐reflecting artificial boundary condition can be obtained by solving the ordinary differential equation whose stability is ensured. Some numerical examples have demonstrated that the non‐reflecting boundary condition is of high accuracy in dealing with scalar wave propagation problems in infinite and semi‐infinite media. Copyright © 2003 John Wiley & Sons, Ltd.     

高功率双工旋转场移相器

旋转场移相器具有移相精度高(均方根误差可小于1°)和温度稳定性好等特点,通过改进射频传输结构,可大大提高他的功率容量。利用旋转场移相器的互易特性和铁氧体圆极化器的非互易特性,设计出高功率双工旋转场移相器。其双工特性可将收/发信号分开,实现移相器和环行器的双重功能,用于天线的收发通道等场合时,可省去一个高功率环行器,结构紧凑。分析了双工旋转场移相器的工作原理,阐述了高功率应用下的设计方法,推导出了管状铁氧体的相移量计算公式,按此方法设计了实用的器件,并给出了试验数据。     

网络化永久性油气藏远程动态实时监测系统设计

本文设计了一种应用于油气藏永久性实时动态监测系统。该系统用光纤Bragg光栅(FBG)传感器作为井下永久性传感器,测量目的层的温度、压力等参数的模拟信号;在井口建立数据采集处理系统,将模拟信号解调成数字信号;通过GPRS无线移动通信网络传输到监测中心的数据库服务器上,并以Web形式发布到Internet网络上,同时提供移动用户浏览接口,且当数据异常时可以发送报警短消息。该系统实现了油气藏的远程实时动态监测,可以为油藏管理人员和技术人员及时、准确地做出决策提供可靠依据。